Does Xorg 6.9/7.0 support the old PCI graphic card S3 Trio64?

[Alex Deucher]

On 4/11/06, Ma Weimin <mwmb2 at hotmail.com> wrote:
> Hello Alex,
>
> i have modified the driver of s3 card from "vesa" to "s3". But the second
> monitor(maybe s3 either) doesn't work. Here are my xorg.conf and Xorg.0.log
> files.
>

Are you sure the s3 card works?  I don't see it listed on your PCI bus
(s3 vendor id: 0x5333), unless it's 1236,6401.  If that's the card,
the s3 driver may not know about that pci id (since it's sigma
designs, not s3).   What does lspci show?  you might also try setting
the busid option for the s3 driver.

Alex


(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2560 card 8086,2560 rev 03 class 06,00,00 hdr
00
(II) PCI: 00:02:0: chip 8086,2562 card 1462,5558 rev 03 class 03,00,00 hdr
00
(II) PCI: 00:1d:0: chip 8086,24c2 card 1462,24cb rev 02 class 0c,03,00 hdr
80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1462,24cb rev 02 class 0c,03,00 hdr
00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1462,24cb rev 02 class 0c,03,00 hdr
00
(II) PCI: 00:1d:7: chip 8086,24cd card 1462,3981 rev 02 class 0c,03,20 hdr
00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 82 class 06,04,00 hdr
01
(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 02 class 06,01,00 hdr
80
(II) PCI: 00:1f:1: chip 8086,24cb card 1462,24cb rev 02 class 01,01,8a hdr
00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1462,24cb rev 02 class 0c,05,00 hdr
00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1462,5550 rev 02 class 04,01,00 hdr
00
(II) PCI: 01:00:0: chip 1236,6401 card 0000,0000 rev 02 class 03,00,00 hdr
00
(II) PCI: 01:0d:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr
00
(II) PCI: End of PCI scan

<snip>