i810 and ADD2 TV out configuration

[Nicolas Will]

Nicolas Will wrote:
> I have a Core 2 Duo CPU on an Intel DG965WH motherboard, G965 chipset 
> with the GMA X3000 video.
> http://www.intel.com/products/motherboard/DG965WH/index.htm
>
> I have added a PixelView ADD2II card for PCI Express w/HMDI, HDTV, 
> S-video & RCA output, using a Chrontel CH7215 Chipset.
> http://prolink-usa.com/item_disp.php?upc=2006886907073
>
> The system is installed with Ubuntu 7.04 "Feisty Fawn", 64-bit install.
>
>     * Kernel 2.6.20 (Ubuntu's 2.6.20-15-generic build)
>     * X Window System Version 7.2.0
>     * i810 v1.7.4

Ah ! I went for the alternate driver in available in Ubuntu.

In fact it is the driver from the modesetting branch, v14.94.94.

I now have more info in the Xorg logs about my sVDO/ADD2 card:

        (II) intel(0): I2C bus "CRTDDC_A" initialized.
        (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
        (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller
        B" registered at address 0x70.
        (II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
        (II) intel(0): SDVO device VID/DID: 02:47.01, clock range
        25.0MHz - 165.0MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
        (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
        (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller
        C" registered at address 0x72.
        (II) intel(0): I2C bus "SDVOC DDC Bus" initialized.
        (EE) intel(0): SDVO: No active TMDS outputs (0x3e00)
        (II) intel(0): SDVO device VID/DID: 02:C2.02, clock range
        25.0MHz - 160.0MHz, input 1: Y, input 2: N, output 1: N, output 2: N
        (II) intel(0): Current clock rate multiplier: 1
        (II) intel(0): Current clock rate multiplier: 8
        (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at
        address 0xA0.
        (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" removed.
        (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address
        0xA0.
        (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
        (II) intel(0): I2C device "SDVOC DDC Bus:ddc2" registered at
        address 0xA0.
        (II) intel(0): I2C device "SDVOC DDC Bus:ddc2" removed.
        (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address
        0xA0.
        (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.


My testing may be more successful, while waiting for any hint from you.

Nico