intel atom D525MW w/i915 onboard gfx vs 16x9 monitor

Gene Heskett gheskett at wdtv.com
Sat Jul 18 03:39:02 PDT 2015



On Saturday 18 July 2015 02:33:22 Thomas L├╝bking wrote:
> On Samstag, 18. Juli 2015 07:51:41 CEST, Gene Heskett wrote:
> > The default seems to be 1280x768.  There is a 13nnx800 mode but the
> > images are bigger than the screen and circles are still smunched
> > vertically. 17" AOC monitor on the machine doing the squashing.
>
> What are complete output of "xrandr -q", contents of
> /var/log/Xorg.0.log and the exact monitor model?
>
> Usually the system asks monitor and IGP for supported modes and
> presents you the intersection - 1280x768 is 16:9.6, but if the
> monitors physical pixels aren't square, this can end up as 16:9
>
> Cheers,
> Thomas

Board is Intel Atom D525MW

gene at shop:~$ xrandr -q
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
   1920x1080      60.0*+
   1280x1024      75.0     60.0  
   1152x864       75.0  
   1024x768       75.1     60.0  
   800x600        75.0     60.3  
   640x480        75.0     60.0  
   720x400        70.1  
HDMI-1 disconnected (normal left inverted right x axis y axis)
VGA-1 disconnected (normal left inverted right x axis y axis)

Log:(word wrap off)
gene at shop:/var/log$ cat Xorg.0.log
[    27.246] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    27.246] X Protocol Version 11, Revision 0
[    27.246] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[    27.246] Current Operating System: Linux shop 3.4-9-rtai-686-pae #1 SMP PREEMPT Debian 3.4.55-4linuxcnc i686
[    27.246] Kernel command line: BOOT_IMAGE=/vmlinuz-3.4-9-rtai-686-pae root=UUID=ef74047c-6f7e-4e27-93f3-917d36ca8b2c ro 
initrd=/install/gtk/initrd.gz lapic isolcpus=1 rootdelay=5
[    27.246] Build Date: 09 February 2015  10:12:47AM
[    27.246] xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau <jcristau at debian.org>) 
[    27.247] Current version of pixman: 0.26.0
[    27.247] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    27.247] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.247] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 28 14:27:22 2015
[    27.276] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.318] (==) No Layout section.  Using the first Screen section.
[    27.318] (==) No screen section available. Using defaults.
[    27.318] (**) |-->Screen "Default Screen Section" (0)
[    27.318] (**) |   |-->Monitor "<default monitor>"
[    27.319] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    27.319] (==) Automatically adding devices
[    27.319] (==) Automatically enabling devices
[    27.354] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    27.354] 	Entry deleted from font path.
[    27.358] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    27.358] 	Entry deleted from font path.
[    27.358] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    27.358] (==) ModulePath set to "/usr/lib/xorg/modules"
[    27.358] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    27.358] (II) Loader magic: 0xb77ea5a0
[    27.358] (II) Module ABI versions:
[    27.358] 	X.Org ANSI C Emulation: 0.4
[    27.358] 	X.Org Video Driver: 12.1
[    27.358] 	X.Org XInput driver : 16.0
[    27.358] 	X.Org Server Extension : 6.0
[    27.360] (--) PCI:*(0:0:2:0) 8086:a001:8086:574d rev 2, Mem @ 0xf0300000/524288, 0xe0000000/268435456, 0xf0200000/1048576, I/O 
@ 0x000020c0/8
[    27.360] (II) Open ACPI successful (/var/run/acpid.socket)
[    27.360] (II) LoadModule: "extmod"
[    27.363] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    27.377] (II) Module extmod: vendor="X.Org Foundation"
[    27.377] 	compiled for 1.12.4, module version = 1.0.0
[    27.377] 	Module class: X.Org Server Extension
[    27.377] 	ABI class: X.Org Server Extension, version 6.0
[    27.378] (II) Loading extension SELinux
[    27.378] (II) Loading extension MIT-SCREEN-SAVER
[    27.378] (II) Loading extension XFree86-VidModeExtension
[    27.378] (II) Loading extension XFree86-DGA
[    27.378] (II) Loading extension DPMS
[    27.378] (II) Loading extension XVideo
[    27.378] (II) Loading extension XVideo-MotionCompensation
[    27.378] (II) Loading extension X-Resource
[    27.378] (II) LoadModule: "dbe"
[    27.378] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    27.389] (II) Module dbe: vendor="X.Org Foundation"
[    27.389] 	compiled for 1.12.4, module version = 1.0.0
[    27.389] 	Module class: X.Org Server Extension
[    27.389] 	ABI class: X.Org Server Extension, version 6.0
[    27.389] (II) Loading extension DOUBLE-BUFFER
[    27.389] (II) LoadModule: "glx"
[    27.390] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    27.409] (II) Module glx: vendor="X.Org Foundation"
[    27.409] 	compiled for 1.12.4, module version = 1.0.0
[    27.409] 	ABI class: X.Org Server Extension, version 6.0
[    27.409] (==) AIGLX enabled
[    27.409] (II) Loading extension GLX
[    27.409] (II) LoadModule: "record"
[    27.410] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    27.551] (II) Module record: vendor="X.Org Foundation"
[    27.551] 	compiled for 1.12.4, module version = 1.13.0
[    27.551] 	Module class: X.Org Server Extension
[    27.551] 	ABI class: X.Org Server Extension, version 6.0
[    27.551] (II) Loading extension RECORD
[    27.551] (II) LoadModule: "dri"
[    27.552] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    27.620] (II) Module dri: vendor="X.Org Foundation"
[    27.620] 	compiled for 1.12.4, module version = 1.0.0
[    27.620] 	ABI class: X.Org Server Extension, version 6.0
[    27.620] (II) Loading extension XFree86-DRI
[    27.620] (II) LoadModule: "dri2"
[    27.621] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    27.639] (II) Module dri2: vendor="X.Org Foundation"
[    27.639] 	compiled for 1.12.4, module version = 1.2.0
[    27.639] 	ABI class: X.Org Server Extension, version 6.0
[    27.639] (II) Loading extension DRI2
[    27.639] (==) Matched intel as autoconfigured driver 0
[    27.639] (==) Matched vesa as autoconfigured driver 1
[    27.639] (==) Matched fbdev as autoconfigured driver 2
[    27.639] (==) Assigned the driver to the xf86ConfigLayout
[    27.639] (II) LoadModule: "intel"
[    27.640] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    27.670] (II) Module intel: vendor="X.Org Foundation"
[    27.670] 	compiled for 1.12.3.902, module version = 2.19.0
[    27.670] 	Module class: X.Org Video Driver
[    27.670] 	ABI class: X.Org Video Driver, version 12.1
[    27.670] (II) LoadModule: "vesa"
[    27.670] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    27.677] (II) Module vesa: vendor="X.Org Foundation"
[    27.677] 	compiled for 1.12.1, module version = 2.3.1
[    27.677] 	Module class: X.Org Video Driver
[    27.678] 	ABI class: X.Org Video Driver, version 12.0
[    27.678] (II) LoadModule: "fbdev"
[    27.678] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    27.699] (II) Module fbdev: vendor="X.Org Foundation"
[    27.699] 	compiled for 1.12.1, module version = 0.4.2
[    27.699] 	ABI class: X.Org Video Driver, version 12.0
[    27.699] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2)
[    27.700] (II) VESA: driver for VESA chipsets: vesa
[    27.700] (II) FBDEV: driver for framebuffer: fbdev
[    27.700] (++) using VT number 7

[    27.704] (WW) Falling back to old probe method for vesa
[    27.704] (WW) Falling back to old probe method for fbdev
[    27.704] (II) Loading sub module "fbdevhw"
[    27.704] (II) LoadModule: "fbdevhw"
[    27.705] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    27.706] (II) Module fbdevhw: vendor="X.Org Foundation"
[    27.706] 	compiled for 1.12.4, module version = 0.0.2
[    27.706] 	ABI class: X.Org Video Driver, version 12.1
[    27.707] drmOpenDevice: node name is /dev/dri/card0
[    27.707] drmOpenDevice: open result is 9, (OK)
[    27.707] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    27.707] drmOpenDevice: node name is /dev/dri/card0
[    27.707] drmOpenDevice: open result is 9, (OK)
[    27.707] drmOpenByBusid: drmOpenMinor returns 9
[    27.707] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    27.707] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    27.707] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    27.707] (==) intel(0): RGB weight 888
[    27.707] (==) intel(0): Default visual is TrueColor
[    27.707] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G
[    27.707] (--) intel(0): Chipset: "Pineview G"
[    27.707] (**) intel(0): Relaxed fencing enabled
[    27.707] (**) intel(0): Wait on SwapBuffers? enabled
[    27.707] (**) intel(0): Triple buffering? enabled
[    27.707] (**) intel(0): Framebuffer tiled
[    27.708] (**) intel(0): Pixmaps tiled
[    27.708] (**) intel(0): 3D buffers tiled
[    27.708] (**) intel(0): SwapBuffers wait enabled
[    27.708] (==) intel(0): video overlay key set to 0x101fe
[    27.709] (II) intel(0): Output LVDS1 has no monitor section
[    27.709] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    27.752] (II) intel(0): Output VGA1 has no monitor section
[    27.752] (II) intel(0): EDID for output LVDS1
[    27.753] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    27.753] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    27.753] (II) intel(0): Printing probed modes for output LVDS1
[    27.753] (II) intel(0): Modeline "1280x800"x58.1   68.90  1280 1292 1340 1440  800 804 807 823 -hsync -vsync (47.8 kHz P)
[    27.753] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    27.753] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    27.753] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    27.753] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)

[    27.787] (II) intel(0): EDID for output VGA1
[    27.788] (II) intel(0): Manufacturer: AOC  Model: 1831  Serial#: 51265
[    27.788] (II) intel(0): Year: 2010  Week: 26
[    27.788] (II) intel(0): EDID Version: 1.3

[    27.788] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    27.788] (II) intel(0): Sync:  Separate
[    27.788] (II) intel(0): Max Image Size [cm]: horiz.: 41  vert.: 23
[    27.788] (II) intel(0): Gamma: 2.20
[    27.788] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[    27.788] (II) intel(0): First detailed timing is preferred mode
[    27.788] (II) intel(0): redX: 0.647 redY: 0.334   greenX: 0.284 greenY: 0.607
[    27.788] (II) intel(0): blueX: 0.151 blueY: 0.071   whiteX: 0.312 whiteY: 0.329
[    27.788] (II) intel(0): Supported established timings:
[    27.788] (II) intel(0): 720x400 at 70Hz
[    27.788] (II) intel(0): 640x480 at 60Hz
[    27.788] (II) intel(0): 640x480 at 67Hz
[    27.788] (II) intel(0): 640x480 at 72Hz
[    27.788] (II) intel(0): 640x480 at 75Hz
[    27.788] (II) intel(0): 800x600 at 56Hz
[    27.788] (II) intel(0): 800x600 at 60Hz
[    27.789] (II) intel(0): 800x600 at 72Hz
[    27.789] (II) intel(0): 800x600 at 75Hz
[    27.789] (II) intel(0): 832x624 at 75Hz
[    27.789] (II) intel(0): 1024x768 at 60Hz
[    27.789] (II) intel(0): 1024x768 at 70Hz
[    27.789] (II) intel(0): 1024x768 at 75Hz
[    27.789] (II) intel(0): Manufacturer's mask: 0
[    27.789] (II) intel(0): Supported standard timings:
[    27.789] (II) intel(0): #0: hsize: 640  vsize 400  refresh: 70  vid: 2609
[    27.789] (II) intel(0): #1: hsize: 1024  vsize 768  refresh: 72  vid: 19553
[    27.789] (II) intel(0): Supported detailed timing:
[    27.789] (II) intel(0): clock: 85.5 MHz   Image Size:  413 x 234 mm
[    27.789] (II) intel(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
[    27.789] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
[    27.789] (II) intel(0): Supported detailed timing:
[    27.789] (II) intel(0): clock: 85.5 MHz   Image Size:  34 x 19 mm
[    27.789] (II) intel(0): h_active: 1360  h_sync: 1424  h_sync_end 1536 h_blank_end 1792 h_border: 0
[    27.789] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 795 v_border: 0
[    27.789] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 95 MHz

[    27.789] (II) intel(0): Monitor name: 831W

[    27.789] (II) intel(0): EDID (in hex):
[    27.789] (II) intel(0): 	00ffffffffffff0005e3311841c80000
[    27.789] (II) intel(0): 	1a140103682917782aeed1a555489b26
[    27.789] (II) intel(0): 	125054bfee00310a614c010101010101
[    27.789] (II) intel(0): 	010101010101662156aa51001e30468f
[    27.789] (II) intel(0): 	33009dea1000001e662150b051001b30
[    27.790] (II) intel(0): 	4070360022130000001e000000fd0037
[    27.790] (II) intel(0): 	4b1e5109000a202020202020000000fc
[    27.790] (II) intel(0): 	00383331570a2020202020202020003e

[    27.790] (II) intel(0): Printing probed modes for output VGA1
[    27.790] (II) intel(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz eP)
[    27.790] (II) intel(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    27.790] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    27.790] (II) intel(0): Modeline "1024x768"x72.0   78.44  1024 1080 1192 1360  768 769 772 801 -hsync +vsync (57.7 kHz)
[    27.790] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    27.790] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    27.790] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    27.790] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    27.790] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    27.790] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    27.790] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    27.790] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    27.790] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    27.790] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    27.790] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    27.790] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    27.790] (II) intel(0): Output LVDS1 connected
[    27.790] (II) intel(0): Output VGA1 connected
[    27.791] (II) intel(0): Using fuzzy aspect match for initial modes
[    27.791] (II) intel(0): Output LVDS1 using initial mode 1024x768
[    27.791] (II) intel(0): Output VGA1 using initial mode 1024x768
[    27.791] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    27.791] (II) intel(0): Kernel page flipping support detected, enabling
[    27.791] (==) intel(0): DPI set to (96, 96)
[    27.791] (II) Loading sub module "fb"
[    27.791] (II) LoadModule: "fb"
[    27.791] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.808] (II) Module fb: vendor="X.Org Foundation"
[    27.808] 	compiled for 1.12.4, module version = 1.0.0
[    27.808] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    27.808] (II) Loading sub module "dri2"
[    27.808] (II) LoadModule: "dri2"
[    27.809] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    27.809] (II) Module dri2: vendor="X.Org Foundation"
[    27.809] 	compiled for 1.12.4, module version = 1.2.0
[    27.809] 	ABI class: X.Org Server Extension, version 6.0
[    27.809] (II) UnloadModule: "vesa"
[    27.809] (II) Unloading vesa
[    27.809] (II) UnloadModule: "fbdev"
[    27.809] (II) Unloading fbdev
[    27.809] (II) UnloadSubModule: "fbdevhw"
[    27.809] (II) Unloading fbdevhw
[    27.809] (==) Depth 24 pixmap format is 32 bpp
[    27.810] (II) intel(0): [DRI2] Setup complete
[    27.810] (II) intel(0): [DRI2]   DRI driver: i915
[    27.810] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    27.820] (II) UXA(0): Driver registered support for the following operations:
[    27.820] (II)         solid
[    27.820] (II)         copy
[    27.820] (II)         composite (RENDER acceleration)
[    27.820] (II)         put_image
[    27.820] (II)         get_image
[    27.820] (==) intel(0): Backing store disabled
[    27.820] (==) intel(0): Silken mouse enabled
[    27.820] (II) intel(0): Initializing HW Cursor
[    27.820] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.823] (==) intel(0): DPMS enabled
[    27.823] (==) intel(0): Intel XvMC decoder disabled
[    27.823] (II) intel(0): Set up textured video
[    27.823] (II) intel(0): Set up overlay video
[    27.823] (II) intel(0): direct rendering: DRI2 Enabled
[    27.823] (==) intel(0): hotplug detection: "enabled"
[    28.280] (--) RandR disabled
[    28.280] (II) Initializing built-in extension Generic Event Extension
[    28.280] (II) Initializing built-in extension SHAPE
[    28.280] (II) Initializing built-in extension MIT-SHM
[    28.280] (II) Initializing built-in extension XInputExtension
[    28.280] (II) Initializing built-in extension XTEST
[    28.280] (II) Initializing built-in extension BIG-REQUESTS
[    28.280] (II) Initializing built-in extension SYNC
[    28.280] (II) Initializing built-in extension XKEYBOARD
[    28.280] (II) Initializing built-in extension XC-MISC
[    28.280] (II) Initializing built-in extension SECURITY
[    28.280] (II) Initializing built-in extension XINERAMA
[    28.280] (II) Initializing built-in extension XFIXES
[    28.280] (II) Initializing built-in extension RENDER
[    28.280] (II) Initializing built-in extension RANDR
[    28.280] (II) Initializing built-in extension COMPOSITE
[    28.280] (II) Initializing built-in extension DAMAGE
[    28.280] (II) SELinux: Disabled on system
[    28.429] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    28.429] (II) AIGLX: enabled GLX_INTEL_swap_event
[    28.429] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    28.429] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    28.430] (II) AIGLX: Loaded and initialized i915
[    28.430] (II) GLX: Initialized DRI2 GL provider for screen 0
[    28.431] (II) intel(0): Setting screen physical size to 270 x 203
[    28.754] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    28.754] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.754] (II) LoadModule: "evdev"
[    28.754] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.786] (II) Module evdev: vendor="X.Org Foundation"
[    28.786] 	compiled for 1.12.1, module version = 2.7.0
[    28.786] 	Module class: X.Org XInput Driver
[    28.786] 	ABI class: X.Org XInput driver, version 16.0
[    28.786] (II) Using input driver 'evdev' for 'Power Button'
[    28.786] (**) Power Button: always reports core events
[    28.787] (**) evdev: Power Button: Device: "/dev/input/event3"
[    28.787] (--) evdev: Power Button: Vendor 0 Product 0x1
[    28.787] (--) evdev: Power Button: Found keys
[    28.787] (II) evdev: Power Button: Configuring as keyboard
[    28.787] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    28.787] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    28.787] (**) Option "xkb_rules" "evdev"
[    28.787] (**) Option "xkb_model" "pc105"
[    28.787] (**) Option "xkb_layout" "us"
[    28.789] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    28.789] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    28.789] (II) Using input driver 'evdev' for 'Sleep Button'
[    28.789] (**) Sleep Button: always reports core events
[    28.789] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    28.789] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    28.789] (--) evdev: Sleep Button: Found keys
[    28.789] (II) evdev: Sleep Button: Configuring as keyboard
[    28.789] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    28.789] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[    28.789] (**) Option "xkb_rules" "evdev"
[    28.789] (**) Option "xkb_model" "pc105"
[    28.789] (**) Option "xkb_layout" "us"
[    28.791] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event4)
[    28.791] (II) No input driver specified, ignoring this device.
[    28.791] (II) This device may have been added with another device file.
[    28.792] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[    28.792] (II) No input driver specified, ignoring this device.
[    28.792] (II) This device may have been added with another device file.
[    28.792] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event6)
[    28.792] (II) No input driver specified, ignoring this device.
[    28.793] (II) This device may have been added with another device file.
[    28.793] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[    28.793] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    28.794] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    28.794] (**) Logitech USB Optical Mouse: always reports core events
[    28.794] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[    28.794] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[    28.794] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[    28.794] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    28.794] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    28.794] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    28.794] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    28.794] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    28.794] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    28.794] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.794] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/event1"
[    28.794] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[    28.794] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    28.795] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    28.795] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    28.795] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    28.795] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    28.796] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    28.796] (II) No input driver specified, ignoring this device.
[    28.796] (II) This device may have been added with another device file.
[    28.797] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event7)
[    28.797] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[    28.797] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[    28.797] (**) USB 2.0 PC Camera: always reports core events
[    28.797] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event7"
[    28.797] (--) evdev: USB 2.0 PC Camera: Vendor 0x58f Product 0x5608
[    28.797] (--) evdev: USB 2.0 PC Camera: Found keys
[    28.797] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[    28.797] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7/event7"
[    28.797] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 9)
[    28.797] (**) Option "xkb_rules" "evdev"
[    28.797] (**) Option "xkb_model" "pc105"
[    28.797] (**) Option "xkb_layout" "us"
[    28.799] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    28.799] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    28.799] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    28.799] (**) AT Translated Set 2 keyboard: always reports core events
[    28.799] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    28.799] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    28.799] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    28.799] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    28.799] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    28.799] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    28.799] (**) Option "xkb_rules" "evdev"
[    28.799] (**) Option "xkb_model" "pc105"
[    28.800] (**) Option "xkb_layout" "us"
[    28.802] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event8)
[    28.802] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    28.802] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    28.802] (**) ACPI Virtual Keyboard Device: always reports core events
[    28.802] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event8"
[    28.802] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    28.802] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    28.802] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    28.802] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[    28.802] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 11)
[    28.802] (**) Option "xkb_rules" "evdev"
[    28.802] (**) Option "xkb_model" "pc105"
[    28.802] (**) Option "xkb_layout" "us"
[4249252.953] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[4249253.384] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[4249357.502] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled

I have space separated the monitor EDID to ID the monitor as it was discovered.

All this is from an ssh -Y login. I am not physically at the monitor,
and its rather crowded around it, would be difficult to turn it around
and get the model off the sticker.  I can later, after the coffee kicks
in ;)
>
> _______________________________________________
> xorg at lists.x.org: X.Org support
> Archives: http://lists.freedesktop.org/archives/xorg
> Info: http://lists.x.org/mailman/listinfo/xorg
> Your subscription address: %(user_address)s

Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>


More information about the xorg mailing list