X.org/Gatos branch

[Steven Amping]

Alex Deucher wrote:

>On Sat,  5 Feb 2005 11:16:01 -0500, s_amping at ece.concordia.ca
><s_amping at ece.concordia.ca> wrote:
>  
>
>>Quoting Alex Deucher <alexdeucher at gmail.com>:
>>
>>    
>>
>>>On Sat,  5 Feb 2005 08:07:53 -0500, s_amping at ece.concordia.ca
>>><s_amping at ece.concordia.ca> wrote:
>>>      
>>>
>>>>Hello all,
>>>>
>>>>I read on the Gatos Project web site (http://gatos.sourceforge.net/) that
>>>>        
>>>>
>>>"the
>>>      
>>>
>>>>driver development is in the process of moving to X.org CVS"
>>>>
>>>>So there is now a branch in the X.org CVS?  I would like to know how I
>>>>        
>>>>
>>>could use
>>>      
>>>
>>>>the gatos drivers with my ATI 8500 AIW DV card.  Are they yet working with
>>>>        
>>>>
>>>X.org
>>>      
>>>
>>>>6.8?  I'm using Fedora Core 3.
>>>>        
>>>>
>>>Vladimir merged the radeon gatos code into xorg cvs HEAD a while back.
>>> He also posted a patch for the r128 GATOS changes, although that
>>>hasn't been merged yet (there's still a bug with using the engine
>>>before it's initialized).  You'd need to check out and build xorg to
>>>use it, or try the DRI nightly snapshots which include an updated DDX,
>>>drm, and dri lib.
>>>http://dri.freedesktop.org/snapshots/
>>>grab the r200 snapshots.
>>>      
>>>
>>Ok.  Thanks.
>>    
>>
Will these ATI drivers with analog capture be a part of a general X.org 
rpm package anytime soon?  At the moment I use the radeon drivers that 
come with FC3 and avoid the ATI proprietary drivers.  The radeon driver 
I'm using is the driver that comes with kernel 2.6 right?  How does the 
analog capture driver for the radeon that is now a part of X.org come 
into play?  If you could help me to understand this.  I think I will 
wait until May for FC4 -- and the summer -- to test the analog capture 
unless these drivers will never be a part of a mainstream distribution?

>>>>The reason I'm after the Gatos drivers is so that I can do some DV editing
>>>>        
>>>>
>>>with
>>>      
>>>
>>>>Kino and even watch a little cable TV.
>>>>        
>>>>
>>>The fireware port on the radeon should be handled by a kernel iee1394
>>>driver, the ohci one as I recall.  gatos will only enable the analog
>>>video stuff.
>>>      
>>>
>>On the Gatos project web site it says for "All-in-Wonder Radeon 8500DV
>>(Radeon200)" in the Supported cards section that "Firewire port (at least the
>>one on the card itself) has been observed to work in Linux."
>>
>>So this isn't a part of the Gatos project but the work was done by someone else
>>and put into the linux kernel?  I have gotten firewire to work in Linux before
>>using a USB/firewire card but I thought that the firewire port on the ATI AIW
>>card was not supported.  I will try again and see what I can get it to do.  Do
>>you know of anyone with experience getting this firewire port to work?
>>
>>    
>>
>
>the gatos project just handled the analog input (tuner, video/audio
>decoder, etc.)  AFAIK, the DV port on the 8500DV is just an ohci
>firewire chip on a pci bridge.  take a look at the linux ieee1394
>project.
>  
>
You were right about this.  After I installed libraw1394 I forgot to do 
'make dev' to create the device /dev/raw1394.  So I'm very happy to 
report that the firewire port for the ATI 8500DV is working on FC3 
without problems.

Thanks for all the help!

Steve