[PATCH 2/2] drm/vc4: Ensure interrupts are disabled

[Eric Anholt]

Stefan Schake <stschake at gmail.com> writes:

> On Tue, Nov 14, 2017 at 1:18 AM, Eric Anholt <eric at anholt.net> wrote:
>> Stefan Schake <stschake at gmail.com> writes:
>>
>>> The overflow mem work callback vc4_overflow_mem_work reenables its
>>> associated interrupt upon completion. To ensure all interrupts are disabled
>>> when we return from vc4_irq_uninstall, we need to disable it again if
>>> cancel_work_sync indicated pending work.
>>
>> Is there a reason we need the interrupts disabled at the V3D level while
>> we have the IRQ disabled at the irqchip level?  Once we re-enable at the
>> irqchip, we immediately V3D_WRITE(V3D_INTENA, V3D_DRIVER_IRQS) anyway.
>
> irqchip will mask it in the ARM interrupt controller, so we will certainly never
> see an interrupt. I'm not sure on the exact guarantees V3D_INTENA and
> V3D_INTCTL make - does the state in INTENA affect if V3D will signal an
> interrupt in INTCTL? We're not currently clearing the latter in postinstall.

INTENA/INTDIS writes update the state of the single register that
controls which bits of INTCTL get ORed together to raise the interrupt
outside the V3D block.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20171114/97441ece/attachment.sig>