[fprint] elan patch + poc 0x903 and 0x0C03

[Hans de Goede]

Hi,

On 17-01-18 16:22, Igor Filatov wrote:
> For me this is either 0x01 or 0x03, just like in the docs. But I do remember that I could never make it behave like Windows driver did, e.g. return same values when I sent the same commands in the same order. But I didn't know I had to give it some time, so that could be the problem.
> 
> And I've never seen the Win driver do reset or fuse load. I wonder what's it for...

Right, I don't think those are necessary.

Regards.

Hans



> 
> On Wed, Jan 17, 2018 at 4:59 PM Hans de Goede <hdegoede at redhat.com <mailto:hdegoede at redhat.com>> wrote:
> 
>     Hi,
> 
>     On 17-01-18 14:46, Sébastien Béchet wrote:
>      > Hello,
>      >
>      > I have done more test and find a functionnal calibration method.
>      >
>      > Strangely, the calibration return returns Mean_H and not the expected status. I need to read the "FP Status" register for the calibration to work in the next step.
>      >
>      > Also, i added 0x04f3:0x01cA to the test list.
>      >
>      > Hans, can you help us to find a recent list of ids?
>      >
>      > All work now for me:
>      >
>      > $ sudo ./elanfp
>      > Device with vid 4f3 pid 903 found.
>      > Config number is 1
>      > CMD RESET sent
>      > CMD Fuse Load sent
>      > CMD VERSION sent
>      > FP Bridge FW Version 1.53
>      > CMD Get Image Size sent
>      > width x height = 96x96
>      > CMD Get Calibration Mean sent
>      > calibration mean value: 33792 (0x8400)
>      > CMD CALIBRATION sent
>      > Calibration Status: 0x84
> 
>     So for me, this is actually 0x03 and if I don't
>     add a break condition on this being 0x03 then
>     the code never leaves the calibration loop for me,
>     keep in minds that I asked Elan for docs for
>     *my* model fingerprint reader, although all these
>     are alike they are not 100% the same...
> 
>     With that all said, good job! With this one small
>     change the program works for me.
> 
>     Regards,
> 
>     Hans
> 
> 
>      > CMD STATUS sent
>      > Status: 0x1
>      > CMD Get Calibration Mean sent
>      > calibration mean value: 256 (0x100)
>      > CMD Wait For Finger sent
>      > Received 0x55
>      > CMD Get Image sent
>      > Received 18432
>      >
>      >
>      > If others confirm maybe Igor can modify the driver?
>      >
>      > On 2018-01-17 12:12, Igor Filatov wrote:
>      >> Looks like o1ca as well https://github.com/iafilatov/libfprint/pull/4
>      >> I wonder if we can get a list of ids if devices like these.
>      >>
>      >> 2018-01-17 12:50 GMT+02:00 Sébastien Béchet <sebastien.bechet at osinix.com <mailto:sebastien.bechet at osinix.com>>:
>      >>> Hello,
>      >>>
>      >>> In attachment what I understood from the documentation.
>      >>>
>      >>> must work for
>      >>>
>      >>> 0x04f3,0x0903
>      >>> 0x04f3,0x0907
>      >>> 0x04f3,0x0C03
>      >>> 0x04f3,0x0C16
>      >>>
>      >>> Please try it.
>      >>>
>