[Intel-gfx] [PATCH v2 05/29] drm/i915: Add dev_priv->psr_mmio_base

ville.syrjala at linux.intel.com ville.syrjala at linux.intel.com
Wed Nov 4 13:19:53 PST 2015


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Drop the EDP_PSR_BASE() thing, and just stick the PSR register offset
under dev_priv, like we for DSI and GPIO for example.

TODO: could probably move a bunch of this kind of stuff into the device
info instead...

v2: Drop the spurious whitespace change (Jani)

Reviewed-by: Jani Nikula <jani.nikula at intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c |  4 ++--
 drivers/gpu/drm/i915/i915_drv.h     |  2 ++
 drivers/gpu/drm/i915/i915_reg.h     | 15 ++++++++-------
 drivers/gpu/drm/i915/intel_psr.c    | 27 +++++++++++++++------------
 4 files changed, 27 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 5659d4c..a038d63 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2560,7 +2560,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 		   yesno(work_busy(&dev_priv->psr.work.work)));
 
 	if (HAS_DDI(dev))
-		enabled = I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE;
+		enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
 	else {
 		for_each_pipe(dev_priv, pipe) {
 			stat[pipe] = I915_READ(VLV_PSRSTAT(pipe)) &
@@ -2582,7 +2582,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 
 	/* CHV PSR has no kind of performance counter */
 	if (HAS_DDI(dev)) {
-		psrperf = I915_READ(EDP_PSR_PERF_CNT(dev)) &
+		psrperf = I915_READ(EDP_PSR_PERF_CNT) &
 			EDP_PSR_PERF_CNT_MASK;
 
 		seq_printf(m, "Performance_Counter: %u\n", psrperf);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d2a546a..cf0367a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1721,6 +1721,8 @@ struct drm_i915_private {
 	/* MMIO base address for MIPI regs */
 	uint32_t mipi_mmio_base;
 
+	uint32_t psr_mmio_base;
+
 	wait_queue_head_t gmbus_wait_queue;
 
 	struct pci_dev *bridge_dev;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0b6c87e..5268ee8 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3075,8 +3075,9 @@ enum skl_disp_power_wells {
 #define VLV_PSRSTAT(pipe) _PIPE(pipe, _PSRSTATA, _PSRSTATB)
 
 /* HSW+ eDP PSR registers */
-#define EDP_PSR_BASE(dev)                       (IS_HASWELL(dev) ? 0x64800 : 0x6f800)
-#define EDP_PSR_CTL(dev)			(EDP_PSR_BASE(dev) + 0)
+#define HSW_EDP_PSR_BASE	0x64800
+#define BDW_EDP_PSR_BASE	0x6f800
+#define EDP_PSR_CTL				(dev_priv->psr_mmio_base + 0)
 #define   EDP_PSR_ENABLE			(1<<31)
 #define   BDW_PSR_SINGLE_FRAME			(1<<30)
 #define   EDP_PSR_LINK_STANDBY			(1<<27)
@@ -3099,10 +3100,10 @@ enum skl_disp_power_wells {
 #define   EDP_PSR_TP1_TIME_0us			(3<<4)
 #define   EDP_PSR_IDLE_FRAME_SHIFT		0
 
-#define EDP_PSR_AUX_CTL(dev)			(EDP_PSR_BASE(dev) + 0x10)
-#define EDP_PSR_AUX_DATA(dev, i)		(EDP_PSR_BASE(dev) + 0x14 + (i) * 4) /* 5 registers */
+#define EDP_PSR_AUX_CTL				(dev_priv->psr_mmio_base + 0x10)
+#define EDP_PSR_AUX_DATA(i)			(dev_priv->psr_mmio_base + 0x14 + (i) * 4) /* 5 registers */
 
-#define EDP_PSR_STATUS_CTL(dev)			(EDP_PSR_BASE(dev) + 0x40)
+#define EDP_PSR_STATUS_CTL			(dev_priv->psr_mmio_base + 0x40)
 #define   EDP_PSR_STATUS_STATE_MASK		(7<<29)
 #define   EDP_PSR_STATUS_STATE_IDLE		(0<<29)
 #define   EDP_PSR_STATUS_STATE_SRDONACK		(1<<29)
@@ -3126,10 +3127,10 @@ enum skl_disp_power_wells {
 #define   EDP_PSR_STATUS_SENDING_TP1		(1<<4)
 #define   EDP_PSR_STATUS_IDLE_MASK		0xf
 
-#define EDP_PSR_PERF_CNT(dev)		(EDP_PSR_BASE(dev) + 0x44)
+#define EDP_PSR_PERF_CNT		(dev_priv->psr_mmio_base + 0x44)
 #define   EDP_PSR_PERF_CNT_MASK		0xffffff
 
-#define EDP_PSR_DEBUG_CTL(dev)		(EDP_PSR_BASE(dev) + 0x60)
+#define EDP_PSR_DEBUG_CTL		(dev_priv->psr_mmio_base + 0x60)
 #define   EDP_PSR_DEBUG_MASK_LPSP	(1<<27)
 #define   EDP_PSR_DEBUG_MASK_MEMUP	(1<<26)
 #define   EDP_PSR_DEBUG_MASK_HPD	(1<<25)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index ff66718..3c973c5 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -183,9 +183,9 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
 				DP_AUX_FRAME_SYNC_ENABLE);
 
 	aux_data_reg = (INTEL_INFO(dev)->gen >= 9) ?
-		DP_AUX_CH_DATA(port, 0) : EDP_PSR_AUX_DATA(dev, 0);
+		DP_AUX_CH_DATA(port, 0) : EDP_PSR_AUX_DATA(0);
 	aux_ctl_reg = (INTEL_INFO(dev)->gen >= 9) ?
-		DP_AUX_CH_CTL(port) : EDP_PSR_AUX_CTL(dev);
+		DP_AUX_CH_CTL(port) : EDP_PSR_AUX_CTL;
 
 	/* Setup AUX registers */
 	for (i = 0; i < sizeof(aux_msg); i += 4)
@@ -277,7 +277,7 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
 		idle_frames += 4;
 	}
 
-	I915_WRITE(EDP_PSR_CTL(dev), val |
+	I915_WRITE(EDP_PSR_CTL, val |
 		   (IS_BROADWELL(dev) ? 0 : link_entry_time) |
 		   max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT |
 		   idle_frames << EDP_PSR_IDLE_FRAME_SHIFT |
@@ -341,7 +341,7 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE);
+	WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
 	WARN_ON(dev_priv->psr.active);
 	lockdep_assert_held(&dev_priv->psr.lock);
 
@@ -405,7 +405,7 @@ void intel_psr_enable(struct intel_dp *intel_dp)
 		}
 
 		/* Avoid continuous PSR exit by masking memup and hpd */
-		I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
+		I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP |
 			   EDP_PSR_DEBUG_MASK_HPD);
 
 		/* Enable PSR on the panel */
@@ -467,17 +467,17 @@ static void hsw_psr_disable(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	if (dev_priv->psr.active) {
-		I915_WRITE(EDP_PSR_CTL(dev),
-			   I915_READ(EDP_PSR_CTL(dev)) & ~EDP_PSR_ENABLE);
+		I915_WRITE(EDP_PSR_CTL,
+			   I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
 
 		/* Wait till PSR is idle */
-		if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev)) &
+		if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL) &
 			       EDP_PSR_STATUS_STATE_MASK) == 0, 2000, 10))
 			DRM_ERROR("Timed out waiting for PSR Idle State\n");
 
 		dev_priv->psr.active = false;
 	} else {
-		WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE);
+		WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
 	}
 }
 
@@ -524,7 +524,7 @@ static void intel_psr_work(struct work_struct *work)
 	 * and be ready for re-enable.
 	 */
 	if (HAS_DDI(dev_priv->dev)) {
-		if (wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev_priv->dev)) &
+		if (wait_for((I915_READ(EDP_PSR_STATUS_CTL) &
 			      EDP_PSR_STATUS_STATE_MASK) == 0, 50)) {
 			DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
 			return;
@@ -567,11 +567,11 @@ static void intel_psr_exit(struct drm_device *dev)
 		return;
 
 	if (HAS_DDI(dev)) {
-		val = I915_READ(EDP_PSR_CTL(dev));
+		val = I915_READ(EDP_PSR_CTL);
 
 		WARN_ON(!(val & EDP_PSR_ENABLE));
 
-		I915_WRITE(EDP_PSR_CTL(dev), val & ~EDP_PSR_ENABLE);
+		I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
 	} else {
 		val = I915_READ(VLV_PSRCTL(pipe));
 
@@ -752,6 +752,9 @@ void intel_psr_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	dev_priv->psr_mmio_base = IS_HASWELL(dev_priv) ?
+		HSW_EDP_PSR_BASE : BDW_EDP_PSR_BASE;
+
 	INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
 	mutex_init(&dev_priv->psr.lock);
 }
-- 
2.4.10



More information about the Intel-gfx mailing list