[Intel-gfx] Reviving the LPSS PWM patches
Lluís Batlle i Rossell
viric at viric.name
Tue Apr 5 19:06:25 UTC 2016
On Tue, Apr 05, 2016 at 12:39:30PM +0200, Lluís Batlle i Rossell wrote:
> On Tue, Apr 05, 2016 at 12:03:44PM +0530, Kumar, Shobhit wrote:
> > On Thursday 31 March 2016 03:57 PM, Lluís Batlle i Rossell wrote:
> > >Hello,
> > >
> > >I saw that you did some work for LPSS PWM:
> > >https://lists.freedesktop.org/archives/intel-gfx/2016-January/085006.html
>
> Definitely I was quite blind in my initial attempts at applying the
> patches, and gave me the idea that they did not apply in any recent tree.
> I've checked that they apply and build over the released 4.5, so I will go
> testing that, maybe today. I will report.
The screen goes black, as before.
I attach the dmesg after applying the four patches (3 + 1) to 4.5.
PWM_LPSS=y and PWM_LPSS_PLATFORM=y
I also attach a dmesg of a panicked kernel that actually does run in that
board, so you can see that it is actually a lpss-pwm case.
Is there anything else I can provide?
Regards,
Lluís.
--
(Escriu-me xifrat si saps PGP / Write ciphered if you know PGP)
PGP key D4831A8A - https://emailselfdefense.fsf.org/
-------------- next part --------------
[ 0.000000] Linux version 4.5.0 (nixbld1 at croscat) (gcc version 5.3.0 (GCC) ) #1-NixOS SMP Mon Mar 14 04:28:54 UTC 2016
[ 0.000000] Command line: initrd=\efi\nixos\2sdsx719bvvnhq5m1m7wf9npshnrvkdy-initrd-initrd.efi systemConfig=/nix/store/5z9ah8njkrl31idk4vkq4hpi0hg1dgnh-nixos-system-teula-16.09.git.63f1eb6 init=/nix/store/5z9ah8njkrl31idk4vkq4hpi0hg1dgnh-nixos-system-teula-16.09.git.63f1eb6/init loglevel=4 fbcon=rotate:1,font:vga8x8 systemd.log_target=console
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x00000000796cefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000796cf000-0x000000007bd3afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bd3b000-0x000000007bd6afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007bd6b000-0x000000007c41afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c41b000-0x000000007c610fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c611000-0x000000007c61afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c61b000-0x000000007c61bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c61c000-0x000000007ccfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ESRT=0x7bd3a000 ACPI=0x7bd6a000 ACPI 2.0=0x7bd6a014 SMBIOS=0x7c465d18
[ 0.000000] efi: requested map not found.
[ 0.000000] esrt: ESRT header is not in the memory map.
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7cd00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07CE00000 mask FFFE00000 uncachable
[ 0.000000] 4 base 07CE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 07CD00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000027000] 27000 size 24576
[ 0.000000] BRK [0x01af1000, 0x01af1fff] PGTABLE
[ 0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE
[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x78f49000-0x794d0fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007BD6A014 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007BD69100 0000B4 (v01 ALASKA A M I 00000003 MSFT 0100000D)
[ 0.000000] ACPI: FACP 0x000000007BD65000 00010C (v05 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: DSDT 0x000000007BD51000 00F3D2 (v02 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: FACS 0x000000007BED1000 000040
[ 0.000000] ACPI: FACS 0x000000007BED1000 000040
[ 0.000000] ACPI: MSDM 0x000000007BD68000 000055 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: UEFI 0x000000007C3D6000 000042 (v01 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: OEM0 0x000000007BD67000 000084 (v05 ALASKA BATTERY 00000003 AMI 0100000D)
[ 0.000000] ACPI: DBG2 0x000000007BD66000 000072 (v00 ALASKA INTLDBG2 00000003 AMI 0100000D)
[ 0.000000] ACPI: HPET 0x000000007BD64000 000038 (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: LPIT 0x000000007BD63000 000104 (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: APIC 0x000000007BD62000 00006C (v03 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: MCFG 0x000000007BD61000 00003C (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: FPDT 0x000000007BD4A000 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007BD49000 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007BD48000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007BD47000 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: EM_1 0x000000007BD46000 000029 (v00 ALASKA A M I 00000005 INTL 0100000D)
[ 0.000000] ACPI: OEM1 0x000000007BD45000 000040 (v01 ALASKA A M I 00000005 INTL 0100000D)
[ 0.000000] ACPI: PIDV 0x000000007BD44000 0000DC (v02 ALASKA A M I 00000002 00000000)
[ 0.000000] ACPI: RSCI 0x000000007BD43000 00002C (v00 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: CSRT 0x000000007BD50000 00014C (v00 ALASKA A M I 00000005 INTL 20120624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ccfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x78f45000-0x78f48fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ccfffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x00000000796cefff]
[ 0.000000] node 0: [mem 0x000000007c611000-0x000000007c61afff]
[ 0.000000] node 0: [mem 0x000000007c61c000-0x000000007ccfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ccfffff]
[ 0.000000] On node 0 totalpages: 498521
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 133 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7924 pages used for memmap
[ 0.000000] DMA32 zone: 494525 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7d000000-0x7effffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x796cf000-0x7bd3afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bd3b000-0x7bd6afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bd6b000-0x7c41afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c41b000-0x7c610fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c61b000-0x7c61bfff]
[ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff880076200000 s91096 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s91096 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 490400
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: initrd=\efi\nixos\2sdsx719bvvnhq5m1m7wf9npshnrvkdy-initrd-initrd.efi systemConfig=/nix/store/5z9ah8njkrl31idk4vkq4hpi0hg1dgnh-nixos-system-teula-16.09.git.63f1eb6 init=/nix/store/5z9ah8njkrl31idk4vkq4hpi0hg1dgnh-nixos-system-teula-16.09.git.63f1eb6/init loglevel=4 fbcon=rotate:1,font:vga8x8 systemd.log_target=console
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1892880K/1994084K available (5176K kernel code, 913K rwdata, 1820K rodata, 1180K init, 884K bss, 101204K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x10
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 1331200 KHz
[ 0.000000] lapic_timer_frequency = 83200
[ 0.000000] tsc: Detected 1331.200 MHz processor
[ 0.000056] Calibrating delay loop (skipped), value calculated using timer frequency.. 2662.40 BogoMIPS (lpj=1331200)
[ 0.000064] pid_max: default: 32768 minimum: 301
[ 0.000086] ACPI: Core revision 20160108
[ 0.037479] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.038877] Security Framework initialized
[ 0.038891] AppArmor: AppArmor initialized
[ 0.039249] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.040662] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.041329] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.041344] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.041861] CPU: Physical Processor ID: 0
[ 0.041867] CPU: Processor Core ID: 0
[ 0.041876] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.041880] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.041891] mce: CPU supports 6 MCE banks
[ 0.041906] CPU0: Thermal monitoring enabled (TM1)
[ 0.041913] process: using mwait in idle threads
[ 0.041921] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.041925] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.042455] Freeing SMP alternatives memory: 20K (ffffffff81a0d000 - ffffffff81a12000)
[ 0.056591] ftrace: allocating 21919 entries in 86 pages
[ 0.075677] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.085708] TSC deadline timer enabled
[ 0.085715] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[ 0.085774] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.085796] ... version: 3
[ 0.085800] ... bit width: 40
[ 0.085803] ... generic registers: 2
[ 0.085807] ... value mask: 000000ffffffffff
[ 0.085810] ... max period: 000000ffffffffff
[ 0.085813] ... fixed-purpose events: 3
[ 0.085816] ... event mask: 0000000700000003
[ 0.086595] x86: Booting SMP configuration:
[ 0.086602] .... node #0, CPUs: #1 #2 #3
[ 0.093562] x86: Booted up 1 node, 4 CPUs
[ 0.093570] smpboot: Total of 4 processors activated (10649.60 BogoMIPS)
[ 0.094505] devtmpfs: initialized
[ 0.095035] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.095041] PM: Registering ACPI NVS region [mem 0x7bd6b000-0x7c41afff] (7012352 bytes)
[ 0.095491] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.095640] pinctrl core: initialized pinctrl subsystem
[ 0.096199] NET: Registered protocol family 16
[ 0.101573] cpuidle: using governor menu
[ 0.101674] ACPI: bus type PCI registered
[ 0.101868] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.101875] PCI: not using MMCONFIG
[ 0.101879] PCI: Using configuration type 1 for base access
[ 0.107895] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.108543] ACPI: Added _OSI(Module Device)
[ 0.108549] ACPI: Added _OSI(Processor Device)
[ 0.108553] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.108557] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.129500] ACPI: Dynamic OEM Table Load:
[ 0.129522] ACPI: SSDT 0xFFFF8800731DA000 000501 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.131491] ACPI: Dynamic OEM Table Load:
[ 0.131510] ACPI: SSDT 0xFFFF8800731DA800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.134124] ACPI: Dynamic OEM Table Load:
[ 0.134141] ACPI: SSDT 0xFFFF880073246800 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.136050] ACPI: Dynamic OEM Table Load:
[ 0.136066] ACPI: SSDT 0xFFFF880075C95000 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.140215] ACPI: Interpreter enabled
[ 0.140254] ACPI: (supports S0 S5)
[ 0.140259] ACPI: Using IOAPIC for interrupt routing
[ 0.140346] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.152205] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[ 0.152212] PCI: not using MMCONFIG
[ 0.152220] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.158178] ACPI: Power Resource [USBC] (on)
[ 0.159089] ACPI: Power Resource [WWPR] (off)
[ 0.165418] ACPI: Power Resource [PLPE] (on)
[ 0.177679] ACPI: Power Resource [CLK0] (on)
[ 0.177811] ACPI: Power Resource [CLK1] (on)
[ 0.178918] ACPI: Power Resource [P28X] (off)
[ 0.179048] ACPI: Power Resource [P18X] (off)
[ 0.188376] ACPI: Power Resource [P28P] (off)
[ 0.188517] ACPI: Power Resource [P18P] (off)
[ 0.188647] ACPI: Power Resource [P28T] (off)
[ 0.188782] ACPI: Power Resource [P18T] (off)
[ 0.188911] ACPI: Power Resource [P1XT] (off)
[ 0.191863] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.191877] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.192004] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
[ 0.192009] _OSC request data: 1 1e 0
[ 0.192020] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.192052] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.192523] PCI host bridge to bus 0000:00
[ 0.192532] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.192539] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.192544] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.192550] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.192556] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.192561] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.192567] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.192573] pci_bus 0000:00: root bus resource [mem 0x7d000001-0x7f000000 window]
[ 0.192578] pci_bus 0000:00: root bus resource [mem 0x80000000-0x90effffe window]
[ 0.192584] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[ 0.192590] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.192608] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.192879] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.192900] pci 0000:00:02.0: reg 0x10: [mem 0x90400000-0x907fffff]
[ 0.192918] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.192934] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.193211] pci 0000:00:03.0: [8086:0f38] type 00 class 0x048000
[ 0.193230] pci 0000:00:03.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.193511] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.193538] pci 0000:00:14.0: reg 0x10: [mem 0x90e00000-0x90e0ffff 64bit]
[ 0.193619] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.193863] pci 0000:00:16.0: [8086:0f37] type 00 class 0x0c0380
[ 0.193885] pci 0000:00:16.0: reg 0x10: [mem 0x90800000-0x909fffff]
[ 0.193898] pci 0000:00:16.0: reg 0x14: [mem 0x90e2e000-0x90e2efff]
[ 0.193973] pci 0000:00:16.0: PME# supported from D0 D3hot
[ 0.194277] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.194309] pci 0000:00:1a.0: reg 0x10: [mem 0x90d00000-0x90dfffff]
[ 0.194328] pci 0000:00:1a.0: reg 0x14: [mem 0x90c00000-0x90cfffff]
[ 0.194455] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.194697] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.195941] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.196139] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.196348] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.196544] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.196739] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.196935] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.197134] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.197353] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.212228] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.212236] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.212242] vgaarb: loaded
[ 0.212246] vgaarb: bridge control possible 0000:00:02.0
[ 0.242491] i2c i2c-0: Failed to register i2c client INT33FE:00 at 0x68 (-16)
[ 0.242505] i2c i2c-0: failed to add I2C device INT33FE:00 from ACPI
[ 0.345076] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[ 0.345381] PCI: Using ACPI for IRQ routing
[ 0.345388] PCI: pci_cache_line_size set to 64 bytes
[ 0.345421] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.345428] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.345433] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.345437] e820: reserve RAM buffer [mem 0x796cf000-0x7bffffff]
[ 0.345442] e820: reserve RAM buffer [mem 0x7c61b000-0x7fffffff]
[ 0.345447] e820: reserve RAM buffer [mem 0x7cd00000-0x7fffffff]
[ 0.345759] NetLabel: Initializing
[ 0.345764] NetLabel: domain hash size = 128
[ 0.345767] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.345797] NetLabel: unlabeled traffic allowed by default
[ 0.345919] clocksource: Switched to clocksource refined-jiffies
[ 0.361144] VFS: Disk quotas dquot_6.6.0
[ 0.361188] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.361416] AppArmor: AppArmor Filesystem Enabled
[ 0.361537] pnp: PnP ACPI init
[ 0.361687] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.361960] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.361968] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.361974] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.361980] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.361987] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.361997] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.362262] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.366250] pnp: PnP ACPI: found 3 devices
[ 0.376542] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.376577] clocksource: Switched to clocksource acpi_pm
[ 0.376601] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.376608] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.376614] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.376619] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.376625] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.376631] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.376637] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.376642] pci_bus 0000:00: resource 11 [mem 0x7d000001-0x7f000000 window]
[ 0.376648] pci_bus 0000:00: resource 12 [mem 0x80000000-0x90effffe window]
[ 0.376654] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed40fff window]
[ 0.376727] NET: Registered protocol family 2
[ 0.377123] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.377239] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.377384] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.377453] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.377486] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.377638] NET: Registered protocol family 1
[ 0.377678] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.378050] PCI: CLS 0 bytes, default 64
[ 0.378190] Unpacking initramfs...
[ 0.582545] Freeing initrd memory: 5664K (ffff880078f49000 - ffff8800794d1000)
[ 0.583004] Scanning for low memory corruption every 60 seconds
[ 0.583898] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.584000] audit: initializing netlink subsys (disabled)
[ 0.584044] audit: type=2000 audit(1459882757.571:1): initialized
[ 0.584727] Initialise system trusted keyring
[ 0.592189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.592297] io scheduler noop registered
[ 0.592399] io scheduler cfq registered (default)
[ 0.615287] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.615309] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.615376] efifb: probing for efifb
[ 0.615410] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000600000, using 1876k, total 1875k
[ 0.615416] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.615419] efifb: scrolling: redraw
[ 0.615424] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.621741] Console: switching to colour frame buffer device 75x50
[ 0.627632] fb0: EFI VGA frame buffer device
[ 0.627660] intel_idle: MWAIT substates: 0x33000020
[ 0.627664] intel_idle: v0.4 model 0x37
[ 0.627667] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.628335] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.648644] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.649887] hpet: number irqs doesn't agree with number of timers
[ 0.650904] Intel P-state driver initializing.
[ 0.654125] microcode: CPU0 sig=0x30678, pf=0x2, revision=0x830
[ 0.654175] microcode: CPU1 sig=0x30678, pf=0x2, revision=0x830
[ 0.654222] microcode: CPU2 sig=0x30678, pf=0x2, revision=0x830
[ 0.654342] microcode: CPU3 sig=0x30678, pf=0x2, revision=0x830
[ 0.654779] microcode: Microcode Update Driver: v2.01 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 0.656695] registered taskstats version 1
[ 0.656728] Loading compiled-in X.509 certificates
[ 0.656874] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.669888] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[ 0.679653] axp20x i2c-INT33F4:00: AXP20x variant AXP288 found
[ 0.731325] axp20x i2c-INT33F4:00: AXP20X driver loaded
[ 0.733044] PM: Hibernation image not present or could not be loaded.
[ 0.735713] Freeing unused kernel memory: 1180K (ffffffff818e6000 - ffffffff81a0d000)
[ 0.735720] Write protecting the kernel read-only data: 8192k
[ 0.737195] Freeing unused kernel memory: 956K (ffff880001511000 - ffff880001600000)
[ 0.738936] Freeing unused kernel memory: 228K (ffff8800017c7000 - ffff880001800000)
[ 0.802497] stage-1-init: loading module dm_mod...
[ 0.829671] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel at redhat.com
[ 0.830233] stage-1-init: running udev...
[ 0.844610] stage-1-init: failed to get cgroup: No medium found
[ 0.844687] stage-1-init: starting version 229
[ 0.846246] random: systemd-udevd urandom read with 2 bits of entropy available
[ 0.943977] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.951483] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.951562] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 0.980012] ACPI: bus type USB registered
[ 0.980077] usbcore: registered new interface driver usbfs
[ 0.980114] usbcore: registered new interface driver hub
[ 0.980173] usbcore: registered new device driver usb
[ 0.994514] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.994533] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.995693] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.995704] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.995879] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.995885] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.995890] usb usb1: Product: xHCI Host Controller
[ 0.995894] usb usb1: Manufacturer: Linux 4.5.0 xhci-hcd
[ 0.995898] usb usb1: SerialNumber: 0000:00:14.0
[ 0.996223] hub 1-0:1.0: USB hub found
[ 0.996246] hub 1-0:1.0: 6 ports detected
[ 1.511048] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.511060] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.511147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.511152] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.511156] usb usb2: Product: xHCI Host Controller
[ 1.511159] usb usb2: Manufacturer: Linux 4.5.0 xhci-hcd
[ 1.511163] usb usb2: SerialNumber: 0000:00:14.0
[ 1.511590] hub 2-0:1.0: USB hub found
[ 1.511607] hub 2-0:1.0: 1 port detected
[ 1.864338] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.988305] i8042: No controller found
[ 1.988342] tsc: Refined TSC clocksource calibration: 1333.337 MHz
[ 1.988347] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1338224bf12, max_idle_ns: 440795235458 ns
[ 2.006087] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.031720] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[ 2.031726] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.031730] usb 1-1: Product: USB2.0 Hub
[ 2.033096] hub 1-1:1.0: USB hub found
[ 2.033467] hub 1-1:1.0: 4 ports detected
[ 2.308983] usb 1-1.2: new low-speed USB device number 3 using xhci_hcd
[ 2.399179] usb 1-1.2: New USB device found, idVendor=0603, idProduct=0002
[ 2.399185] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.399188] usb 1-1.2: Product: USB Composite Device
[ 2.399192] usb 1-1.2: Manufacturer: SINO WEALTH
[ 2.411505] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.432861] usbcore: registered new interface driver usbhid
[ 2.432882] usbhid: USB HID core driver
[ 2.435490] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0603:0002.0001/input/input0
[ 2.467318] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
[ 2.486746] hid-generic 0003:0603:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-1.2/input0
[ 2.487135] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:0603:0002.0002/input/input1
[ 2.539592] hid-generic 0003:0603:0002.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-1.2/input1
[ 2.545863] usb 1-1.4: New USB device found, idVendor=0781, idProduct=5590
[ 2.545871] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.545875] usb 1-1.4: Product: Ultra
[ 2.545879] usb 1-1.4: Manufacturer: SanDisk
[ 2.545883] usb 1-1.4: SerialNumber: 4C530001071024108515
[ 2.567724] SCSI subsystem initialized
[ 2.573760] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 2.574056] scsi host0: usb-storage 1-1.4:1.0
[ 2.574277] usbcore: registered new interface driver usb-storage
[ 3.052351] i8042: No controller found
[ 3.052383] clocksource: Switched to clocksource tsc
[ 3.075017] stage-1-init: starting device mapper and LVM...
[ 3.579319] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
[ 3.590131] sd 0:0:0:0: [sda] 30375936 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 3.590935] sd 0:0:0:0: [sda] Write Protect is off
[ 3.590945] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 3.591525] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.612400] sda: sda1 sda2
[ 3.615550] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.201093] stage-1-init: waiting for device /dev/disk/by-uuid/7a2960aa-3630-48c1-9db8-cf75a3e15a6d to appear...
[ 4.227005] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 5.269126] i8042: No controller found
[ 5.277089] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 6.319159] i8042: No controller found
[ 6.335464] stage-1-init: checking /dev/disk/by-uuid/7a2960aa-3630-48c1-9db8-cf75a3e15a6d...
[ 6.337000] stage-1-init: fsck (busybox 1.23.2, )
[ 6.337231] stage-1-init: [fsck.ext4 (1) -- /mnt-root/] fsck.ext4 -a /dev/disk/by-uuid/7a2960aa-3630-48c1-9db8-cf75a3e15a6d
[ 6.355023] stage-1-init: /dev/disk/by-uuid/7a2960aa-3630-48c1-9db8-cf75a3e15a6d: clean, 493443/933888 files, 1908006/3731195 blocks
[ 6.363367] stage-1-init: mounting /dev/disk/by-uuid/7a2960aa-3630-48c1-9db8-cf75a3e15a6d on /...
[ 6.786808] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.813253] random: nonblocking pool is initialized
[ 7.239787] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 7.241362] booting system configuration /nix/store/5z9ah8njkrl31idk4vkq4hpi0hg1dgnh-nixos-system-teula-16.09.git.63f1eb6
[ 7.524332] stage-2-init: running activation script...
[ 7.591066] stage-2-init: setting up /etc...
[ 9.475880] NET: Registered protocol family 10
[ 10.285248] loop: module loaded
[ 10.301852] audit: type=1130 audit(1459882767.273:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.308470] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 10.385865] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 10.391406] audit: type=1130 audit(1459882767.362:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.350359] i8042: No controller found
[ 11.368869] audit: type=1130 audit(1459882768.338:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.372227] audit: type=1130 audit(1459882768.342:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.375459] audit: type=1130 audit(1459882768.345:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.438182] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 11.518149] audit: type=1127 audit(1459882768.487:7): pid=407 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 11.551821] audit: type=1130 audit(1459882768.521:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.609427] audit: type=1130 audit(1459882768.578:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.618530] audit: type=1130 audit(1459882768.587:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.694167] audit: type=1130 audit(1459882768.663:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.765038] 80860F0A:00: ttyS1 at MMIO 0x90f47000 (irq = 39, base_baud = 2764800) is a 16550A
[ 11.775992] 80860F0A:01: ttyS2 at MMIO 0x90f4d000 (irq = 40, base_baud = 2764800) is a 16550A
[ 11.787247] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 11.787259] ACPI: Power Button [PWRF]
[ 11.794207] ACPI: Battery Slot [BMBT] (battery present)
[ 11.874352] sdhci: Secure Digital Host Controller Interface driver
[ 11.874359] sdhci: Copyright(c) Pierre Ossman
[ 11.892074] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 11.897063] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 11.908420] ------------[ cut here ]------------
[ 11.908434] WARNING: CPU: 1 PID: 431 at /tmp/nix-build-linux-4.5.drv-0/linux-4.5/drivers/pinctrl/intel/pinctrl-baytrail.c:212 byt_gpio_request+0xb0/0xe0()
[ 11.908438] Modules linked in: pcc_cpufreq(-) snd_soc_core(+) sdhci_acpi(+) sdhci mmc_core led_class snd_compress spi_pxa2xx_platform ac97_bus snd_pcm_dmaengine battery processor button 8250_dw snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore nf_conntrack_ftp nf_conntrack loop cpufreq_ondemand efivarfs ipv6 autofs4 ext4 crc16 jbd2 mbcache sd_mod usb_storage scsi_mod hid_generic usbhid hid xhci_pci xhci_hcd crc32c_intel usbcore usb_common rtc_cmos serio dm_mod
[ 11.908494] CPU: 1 PID: 431 Comm: systemd-udevd Not tainted 4.5.0 #1-NixOS
[ 11.908497] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 11.908501] 0000000000000000 ffff8800766c7918 ffffffff812c99de 0000000000000000
[ 11.908507] ffffffff81756758 ffff8800766c7950 ffffffff81070842 ffffc900003623a0
[ 11.908513] ffff880073247c18 0000000000000026 0000000000000001 ffff880073247d60
[ 11.908519] Call Trace:
[ 11.908528] [<ffffffff812c99de>] dump_stack+0x63/0x85
[ 11.908535] [<ffffffff81070842>] warn_slowpath_common+0x82/0xc0
[ 11.908541] [<ffffffff8107093a>] warn_slowpath_null+0x1a/0x20
[ 11.908546] [<ffffffff812f7fd0>] byt_gpio_request+0xb0/0xe0
[ 11.908551] [<ffffffff812f8773>] __gpiod_request+0x73/0x100
[ 11.908556] [<ffffffff812fb17e>] gpiod_request+0x3e/0xa0
[ 11.908562] [<ffffffff812fb42e>] gpiod_get_index+0x19e/0x2d0
[ 11.908567] [<ffffffff812f80c9>] devm_gpiod_get_index+0x59/0x90
[ 11.908579] [<ffffffffa042f55b>] mmc_gpiod_request_cd+0x3b/0x90 [mmc_core]
[ 11.908588] [<ffffffffa04b168d>] sdhci_acpi_probe+0x36d/0x420 [sdhci_acpi]
[ 11.908595] [<ffffffff813dafdb>] platform_drv_probe+0x3b/0xa0
[ 11.908601] [<ffffffff8134a381>] ? acpi_lpss_activate+0x3a/0x53
[ 11.908606] [<ffffffff813d9182>] driver_probe_device+0x202/0x2c0
[ 11.908611] [<ffffffff813d92c4>] __driver_attach+0x84/0x90
[ 11.908616] [<ffffffff813d9240>] ? driver_probe_device+0x2c0/0x2c0
[ 11.908622] [<ffffffff813d70b4>] bus_for_each_dev+0x64/0xa0
[ 11.908627] [<ffffffff813d88fe>] driver_attach+0x1e/0x20
[ 11.908633] [<ffffffff813d8501>] bus_add_driver+0x1b1/0x220
[ 11.908638] [<ffffffffa04b4000>] ? 0xffffffffa04b4000
[ 11.908642] [<ffffffff813d9b30>] driver_register+0x60/0xe0
[ 11.908647] [<ffffffff813daf56>] __platform_driver_register+0x36/0x40
[ 11.908654] [<ffffffffa04b4017>] sdhci_acpi_driver_init+0x17/0x19 [sdhci_acpi]
[ 11.908660] [<ffffffff81002109>] do_one_initcall+0x99/0x1e0
[ 11.908667] [<ffffffff811ab326>] ? kmem_cache_alloc_trace+0x176/0x1e0
[ 11.908673] [<ffffffff8114f3a6>] do_init_module+0x5f/0x1cb
[ 11.908679] [<ffffffff810e62f3>] load_module+0x1f73/0x2380
[ 11.908685] [<ffffffff810e2ee0>] ? __symbol_put+0x50/0x50
[ 11.908692] [<ffffffff810e6813>] SYSC_init_module+0x113/0x130
[ 11.908697] [<ffffffff810e68de>] SyS_init_module+0xe/0x10
[ 11.908704] [<ffffffff815098ae>] entry_SYSCALL_64_fastpath+0x12/0x6d
[ 11.908709] ---[ end trace 899ced53ae334840 ]---
[ 11.908717] byt_gpio INT33FC:00: pin 38 forcibly re-configured as GPIO
[ 11.914342] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[ 11.995497] ACPI: AC Adapter [ADP1] (on-line)
[ 12.034805] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 12.053578] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 12.058813] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 12.087615] i2c_hid i2c-GODX0911:01: Failed to get GPIO interrupt
[ 12.251141] mmc0: MAN_BKOPS_EN bit is not set
[ 12.260183] mmc0: new HS200 MMC card at address 0001
[ 13.096285] i8042: No controller found
[ 13.099794] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 13.100492] i2c_hid: probe of i2c-GODX0911:01 failed with error -2
[ 13.138606] intel_sst_acpi 80860F28:00: LPE base: 0x91000000 size:0x200000
[ 13.138614] intel_sst_acpi 80860F28:00: IRAM base: 0x910c0000
[ 13.138642] intel_sst_acpi 80860F28:00: DRAM base: 0x91100000
[ 13.138653] intel_sst_acpi 80860F28:00: SHIM base: 0x91140000
[ 13.138665] intel_sst_acpi 80860F28:00: Mailbox base: 0x91144000
[ 13.138675] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[ 13.138874] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[ 13.178687] [Firmware Bug]: No valid trip found
[ 13.322691] Linux agpgart interface v0.103
[ 13.324986] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[ 13.324995] mei_txe 0000:00:1a.0: PCI INT A: no GSI
[ 13.405665] EFI Variables Facility v0.08 2004-May-17
[ 13.450064] intel_soc_dts_thermal: request_threaded_irq ret -22
[ 13.452649] pstore: Registered efi as persistent store backend
[ 13.462237] input: axp20x-pek as /devices/platform/80860F41:04/i2c-4/i2c-INT33F4:00/axp20x-pek/input/input3
[ 13.493331] mousedev: PS/2 mouse device common for all mice
[ 13.601866] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input4
[ 13.603327] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input5
[ 13.620835] mmcblk0: mmc0:0001 NCard 28.9 GiB
[ 13.621110] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB
[ 13.621331] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB
[ 13.621489] mmcblk0rpmb: mmc0:0001 NCard partition 3 4.00 MiB
[ 13.629458] usbcore: registered new interface driver uas
[ 13.631426] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> media-cpu-dai mapping ok
[ 13.631507] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok
[ 13.631565] compress asoc: snd-soc-dummy-dai <-> compress-cpu-dai mapping ok
[ 13.636395] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp2-port mapping ok
[ 13.646386] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
[ 13.725705] [drm] Initialized drm 1.1.0 20060810
[ 15.138387] [drm] Memory usable by graphics device = 2048M
[ 15.138396] checking generic (80000000 1d5000) vs hw (80000000 10000000)
[ 15.138400] fb: switching to inteldrmfb from EFI VGA
[ 15.138467] Console: switching to colour dummy device 80x25
[ 15.138587] [drm] Replacing VGA console driver
[ 15.139841] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.139847] [drm] Driver supports precise vblank timestamp query.
[ 15.202271] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 15.203281] [drm:pwm_setup_backlight [i915]] *ERROR* Failed to own the pwm chip: pwm_lpss
[ 15.269684] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 15.270761] acpi device:09: registered as cooling_device5
[ 15.270905] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 15.271773] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[ 15.606235] fbcon: inteldrmfb (fb0) is primary device
[ 15.736841] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 15.736854] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 3
[ 15.736986] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220f064 hci version 0x96 quirks 0x00010000
[ 15.737016] xhci-hcd xhci-hcd.4.auto: irq 22, io mem 0x90800000
[ 15.737665] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.737668] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.737671] usb usb3: Product: xHCI Host Controller
[ 15.737674] usb usb3: Manufacturer: Linux 4.5.0 xhci-hcd
[ 15.737676] usb usb3: SerialNumber: xhci-hcd.4.auto
[ 15.738010] hub 3-0:1.0: USB hub found
[ 15.738031] hub 3-0:1.0: 1 port detected
[ 15.738243] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 15.738252] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 4
[ 15.738297] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 15.738390] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 15.738393] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.738395] usb usb4: Product: xHCI Host Controller
[ 15.738398] usb usb4: Manufacturer: Linux 4.5.0 xhci-hcd
[ 15.738400] usb usb4: SerialNumber: xhci-hcd.4.auto
[ 15.738697] hub 4-0:1.0: USB hub found
[ 15.738717] hub 4-0:1.0: 1 port detected
[ 15.813451] audit_printk_skb: 12 callbacks suppressed
[ 15.813453] audit: type=1305 audit(1459882772.776:16): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
[ 15.813563] audit: type=1305 audit(1459882772.776:17): audit_backlog_limit=64 old=64 auid=4294967295 ses=4294967295 res=1
[ 15.813658] audit: type=1305 audit(1459882772.776:18): audit_failure=1 old=1 auid=4294967295 ses=4294967295 res=1
[ 15.813743] audit: type=1305 audit(1459882772.776:19): audit_rate_limit=0 old=0 auid=4294967295 ses=4294967295 res=1
[ 15.888481] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 15.905108] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.223807] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 0 doesn't have DAPM widget!!!
[ 16.223831] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 1 doesn't have DAPM widget!!!
[ 16.223857] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 2 doesn't have DAPM widget!!!
[ 16.223885] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 3 doesn't have DAPM widget!!!
[ 16.223906] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!!
[ 16.223929] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!!
[ 16.223954] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!!
[ 16.223999] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!!
[ 16.241425] SSE version of gcm_enc/dec engaged.
[ 16.911312] audit: type=1325 audit(1459882773.871:20): table=filter family=2 entries=0
[ 16.911738] audit: type=1300 audit(1459882773.871:20): arch=c000003e syscall=175 success=yes exit=0 a0=1096970 a1=1c70 a2=4193d3 a3=0 items=0 ppid=6 pid=523 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/nix/store/yjcglkadi7sv1ga0ln5g5b2cnlwd8afi-kmod-22/bin/kmod" key=(null)
[ 16.911754] audit: type=1327 audit(1459882773.871:20): proctitle=2F6E69782F73746F72652F796A63676C6B616469377376316761306C6E3567356232636E6C7764386166692D6B6D6F642D32322F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
[ 17.269156] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.433577] audit: type=1325 audit(1459882774.393:21): table=filter family=10 entries=0
[ 17.434341] audit: type=1300 audit(1459882774.393:21): arch=c000003e syscall=175 success=yes exit=0 a0=eea970 a1=1c40 a2=4193d3 a3=0 items=0 ppid=6 pid=546 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/nix/store/yjcglkadi7sv1ga0ln5g5b2cnlwd8afi-kmod-22/bin/kmod" key=(null)
[ 17.434356] audit: type=1327 audit(1459882774.393:21): proctitle=2F6E69782F73746F72652F796A63676C6B616469377376316761306C6E3567356232636E6C7764386166692D6B6D6F642D32322F7362696E2F6D6F6470726F6265002D71002D2D006970367461626C655F66696C746572
[ 17.669824] Console: switching to colour frame buffer device 160x50
[ 17.683655] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 59.112651] audit_printk_skb: 372 callbacks suppressed
[ 59.112657] audit: type=1006 audit(1459882816.005:74): pid=630 uid=0 old-auid=4294967295 auid=0 old-ses=4294967295 ses=1 res=1
[ 59.149986] audit: type=1006 audit(1459882816.043:75): pid=698 uid=0 old-auid=4294967295 auid=0 old-ses=4294967295 ses=2 res=1
[ 59.270314] audit: type=1130 audit(1459882816.163:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user at 0 comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 83.802215] audit: type=1130 audit(1459882840.655:77): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty at tty2 comm="systemd" exe="/nix/store/8x9ml5q9cj7jzwq7v8wrwdg4zp99za7q-systemd-229/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 86.606515] audit: type=1006 audit(1459882843.455:78): pid=725 uid=0 old-auid=4294967295 auid=0 old-ses=4294967295 ses=3 res=1
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.62-x86_64_byt (dell at build) (gcc version 4.8 (GCC) ) #3 SMP PREEMPT Thu Nov 19 18:11:32 CST 2015
[ 0.000000] Command line: loglevel=0 androidboot.bootmedia=sdcard androidboot.hardware=em_i8811m slub_max_order=2 watchdog.watchdog_thresh=60 androidboot.spid=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx androidboot.serialno=01234567890123456789 gpt oops=panic panic=1 vmalloc=172M debug_locks=0 bootboost=1 vga=current i915.modeset=1 drm.vblankoffdelay=1 acpi_backlight=vendor i915.mipi_panel_id=0x26 androidboot.bootreason=security_initiated battlow androidboot.mode=main
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x00000000796cdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000796ce000-0x000000007bd39fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bd3a000-0x000000007bd69fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007bd6a000-0x000000007c419fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c41a000-0x000000007c60ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c610000-0x000000007c61afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c61b000-0x000000007c61bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c61c000-0x000000007ccfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] Low Battery detected! Frequency shall be capped.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x7bd69000 ACPI 2.0=0x7bd69014 SMBIOS=0x7c464d18
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009d000) (0MB)
[ 0.000000] efi: mem03: type=2, attr=0xf, range=[0x000000000009d000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem04: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x000000000043b000) (3MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x000000000043b000-0x0000000002000000) (27MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003c04000) (28MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000003c04000-0x0000000010000000) (195MB)
[ 0.000000] efi: mem09: type=1, attr=0xf, range=[0x0000000010000000-0x000000001012c000) (1MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x000000001012c000-0x0000000020000000) (254MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x000000003fffc000) (509MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000003fffc000-0x0000000040000000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000040000000-0x0000000074b43000) (843MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x0000000074b43000-0x0000000074b45000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000074b45000-0x0000000074b46000) (0MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000074b46000-0x0000000074b48000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000074b48000-0x00000000755f5000) (10MB)
[ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x00000000755f5000-0x00000000759e1000) (3MB)
[ 0.000000] efi: mem20: type=1, attr=0xf, range=[0x00000000759e1000-0x0000000075f30000) (5MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000075f30000-0x0000000078d20000) (45MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x0000000078d20000-0x00000000794d0000) (7MB)
[ 0.000000] efi: mem23: type=3, attr=0xf, range=[0x00000000794d0000-0x00000000796ce000) (1MB)
[ 0.000000] efi: mem24: type=0, attr=0xf, range=[0x00000000796ce000-0x000000007bd3a000) (38MB)
[ 0.000000] efi: mem25: type=9, attr=0xf, range=[0x000000007bd3a000-0x000000007bd6a000) (0MB)
[ 0.000000] efi: mem26: type=10, attr=0xf, range=[0x000000007bd6a000-0x000000007c41a000) (6MB)
[ 0.000000] efi: mem27: type=6, attr=0x800000000000000f, range=[0x000000007c41a000-0x000000007c51d000) (1MB)
[ 0.000000] efi: mem28: type=5, attr=0x800000000000000f, range=[0x000000007c51d000-0x000000007c610000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x000000007c610000-0x000000007c611000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x000000007c611000-0x000000007c61b000) (0MB)
[ 0.000000] efi: mem31: type=6, attr=0x800000000000000f, range=[0x000000007c61b000-0x000000007c61c000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x000000007c61c000-0x000000007c7d0000) (1MB)
[ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x000000007c7d0000-0x000000007c7d1000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x000000007c7d1000-0x000000007ccf6000) (5MB)
[ 0.000000] efi: mem35: type=2, attr=0xf, range=[0x000000007ccf6000-0x000000007ccf7000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x000000007ccf7000-0x000000007cd00000) (0MB)
[ 0.000000] efi: mem37: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem38: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem39: type=11, attr=0x8000000000000001, range=[0x00000000fed08000-0x00000000fed09000) (0MB)
[ 0.000000] efi: mem40: type=11, attr=0x8000000000000001, range=[0x00000000ffb00000-0x0000000100000000) (5MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7cd00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07CE00000 mask FFFE00000 uncachable
[ 0.000000] 4 base 07CE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 07CD00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2016MB, range: 32MB, type UC
[ 0.000000] reg 2, base: 2000MB, range: 16MB, type UC
[ 0.000000] reg 3, base: 1998MB, range: 2MB, type UC
[ 0.000000] reg 4, base: 1998MB, range: 2MB, type UC
[ 0.000000] reg 5, base: 1997MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 1997M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 1997MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1998MB, range: 2MB, type UC
[ 0.000000] reg 3, base: 2000MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 2016MB, range: 32MB, type UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000026000] 26000 size 28672
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x03bdf000, 0x03bdffff] PGTABLE
[ 0.000000] BRK [0x03be0000, 0x03be0fff] PGTABLE
[ 0.000000] BRK [0x03be1000, 0x03be1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x79200000-0x793fffff]
[ 0.000000] [mem 0x79200000-0x793fffff] page 2M
[ 0.000000] BRK [0x03be2000, 0x03be2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x78000000-0x791fffff]
[ 0.000000] [mem 0x78000000-0x791fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x77ffffff]
[ 0.000000] [mem 0x20200000-0x77ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x79400000-0x796cdfff]
[ 0.000000] [mem 0x79400000-0x795fffff] page 2M
[ 0.000000] [mem 0x79600000-0x796cdfff] page 4k
[ 0.000000] BRK [0x03be3000, 0x03be3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c610000-0x7c61afff]
[ 0.000000] [mem 0x7c610000-0x7c61afff] page 4k
[ 0.000000] BRK [0x03be4000, 0x03be4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c61c000-0x7ccfffff]
[ 0.000000] [mem 0x7c61c000-0x7c7fffff] page 4k
[ 0.000000] [mem 0x7c800000-0x7cbfffff] page 2M
[ 0.000000] [mem 0x7cc00000-0x7ccfffff] page 4k
[ 0.000000] RAMDISK: [mem 0x00100000-0x00439fff]
[ 0.000000] ACPI: RSDP 000000007bd69014 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 000000007bd68100 000B4 (v01 ALASKA A M I 00000003 MSFT 0100000D)
[ 0.000000] ACPI: FACP 000000007bd64000 0010C (v05 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: DSDT 000000007bd50000 0F3D2 (v02 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: FACS 000000007bed0000 00040
[ 0.000000] ACPI: MSDM 000000007bd67000 00055 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: UEFI 000000007c3d5000 00042 (v01 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: OEM0 000000007bd66000 00084 (v05 ALASKA BATTERY 00000003 AMI 0100000D)
[ 0.000000] ACPI: DBG2 000000007bd65000 00072 (v00 ALASKA INTLDBG2 00000003 AMI 0100000D)
[ 0.000000] ACPI: HPET 000000007bd63000 00038 (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: LPIT 000000007bd62000 00104 (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: APIC 000000007bd61000 0006C (v03 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: MCFG 000000007bd60000 0003C (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: FPDT 000000007bd49000 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 000000007bd48000 00763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007bd47000 00290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007bd46000 0017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: EM_1 000000007bd45000 00029 (v00 ALASKA A M I 00000005 INTL 0100000D)
[ 0.000000] ACPI: OEM1 000000007bd44000 00040 (v01 ALASKA A M I 00000005 INTL 0100000D)
[ 0.000000] ACPI: PIDV 000000007bd43000 000DC (v02 ALASKA A M I 00000002 00000000)
[ 0.000000] ACPI: RSCI 000000007bd42000 0002C (v00 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: CSRT 000000007bd4f000 0014C (v00 ALASKA A M I 00000005 INTL 20120624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880073400000-ffff8800753fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x796cdfff]
[ 0.000000] node 0: [mem 0x7c610000-0x7c61afff]
[ 0.000000] node 0: [mem 0x7c61c000-0x7ccfffff]
[ 0.000000] On node 0 totalpages: 498521
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 960 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7924 pages used for memmap
[ 0.000000] DMA32 zone: 494525 pages, LIFO batch:31
[ 0.000000] Will Disable HPET for this platform
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 103
[ 0.000000] intel_mid_pstore_ram: reserved RAM buffer (0x219000 at 0xfde7000)
[ 0.000000] e820: [mem 0x7cd00000-0xe00f7fff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880079200000 s80448 r8192 d21952 u524288
[ 0.000000] pcpu-alloc: s80448 r8192 d21952 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 489573
[ 0.000000] Kernel command line: loglevel=0 androidboot.bootmedia=sdcard androidboot.hardware=em_i8811m slub_max_order=2 watchdog.watchdog_thresh=60 androidboot.spid=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx androidboot.serialno=01234567890123456789 gpt oops=panic panic=1 vmalloc=172M debug_locks=0 bootboost=1 vga=current i915.modeset=1 drm.vblankoffdelay=1 acpi_backlight=vendor i915.mipi_panel_id=0x26 androidboot.bootreason=security_initiated battlow androidboot.mode=main
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1866880k/2044928k available (10060k kernel code, 50844k absent, 127204k reserved, 8661k data, 1308k init)
[ 0.000000] SLUB: HWalign=64, Order=0-2, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] logger: created 256K log 'log_kern_bot'
[ 0.000000] logger: register logcat console
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5823 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1333.387 MHz processor
[ 0.000011] Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.77 BogoMIPS (lpj=13333870)
[ 0.000035] pid_max: default: 32768 minimum: 301
[ 0.000141] init_memory_mapping: [mem 0x7c41a000-0x7c51cfff]
[ 0.000162] [mem 0x7c41a000-0x7c51cfff] page 4k
[ 0.000235] init_memory_mapping: [mem 0x7c51d000-0x7c60ffff]
[ 0.000252] [mem 0x7c51d000-0x7c60ffff] page 4k
[ 0.000315] init_memory_mapping: [mem 0x7c61b000-0x7c61bfff]
[ 0.000332] [mem 0x7c61b000-0x7c61bfff] page 4k
[ 0.002252] Security Framework initialized
[ 0.002285] SELinux: Initializing.
[ 0.002401] SELinux: Starting in permissive mode
[ 0.002506] Mount-cache hash table entries: 256
[ 0.003818] Initializing cgroup subsys debug
[ 0.003844] Initializing cgroup subsys memory
[ 0.003915] Initializing cgroup subsys devices
[ 0.003937] Initializing cgroup subsys freezer
[ 0.003955] Initializing cgroup subsys blkio
[ 0.003972] Initializing cgroup subsys perf_event
[ 0.004147] CPU: Physical Processor ID: 0
[ 0.004164] CPU: Processor Core ID: 0
[ 0.004182] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.004182] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009832] mce: CPU supports 6 MCE banks
[ 0.009862] CPU0: Thermal monitoring enabled (TM1)
[ 0.009893] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.009893] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
[ 0.009893] tlb_flushall_shift: 6
[ 0.010423] Freeing SMP alternatives: 28k freed
[ 0.010471] ACPI: Core revision 20130517
[ 0.098251] ACPI: All ACPI Tables successfully acquired
[ 0.116848] ftrace: allocating 34760 entries in 136 pages
[ 0.201541] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz (fam: 06, model: 37, stepping: 08)
[ 0.201610] TSC deadline timer enabled
[ 0.201675] Performance Events: no PEBS fmt2+, 8-deep LBR, Atom events, Intel PMU driver.
[ 0.201728] ... version: 3
[ 0.201743] ... bit width: 40
[ 0.201755] ... generic registers: 2
[ 0.201768] ... value mask: 000000ffffffffff
[ 0.201781] ... max period: 000000007fffffff
[ 0.201793] ... fixed-purpose events: 3
[ 0.201805] ... event mask: 0000000700000003
[ 0.242211] ftrace: Allocated trace_printk buffers
[ 0.293259] SMP alternatives: lockdep: fixing up alternatives
[ 0.310664] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.293286] smpboot: Booting Node 0, Processors #1
[ 0.323375] SMP alternatives: lockdep: fixing up alternatives
[ 0.323401] #2
[ 0.353422] SMP alternatives: lockdep: fixing up alternatives
[ 0.353448] #3 OK
[ 0.370361] Skipped synchronization checks as TSC is reliable.
[ 0.370581] Brought up 4 CPUs
[ 0.370603] smpboot: Total of 4 processors activated (10667.09 BogoMIPS)
[ 0.376247] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.376274] PM: Registering ACPI NVS region [mem 0x7bd6a000-0x7c419fff] (7012352 bytes)
[ 0.386539] regulator-dummy: no parameters
[ 0.386733] RTC time: 19:28:54, date: 01/06/16
[ 0.387132] NET: Registered protocol family 16
[ 0.389930] SPID updated according to ACPI Table:
[ 0.389963] spid customer id : 0000
[ 0.389963] spid vendor id : 0000
[ 0.389963] spid manufacturer id : 0000
[ 0.389963] spid platform family id : 0007
[ 0.389963] spid product line id : 0000
[ 0.389963] spid hardware id : 0007
[ 0.389963] spid fru[4..0] : 00 00 00 00 00
[ 0.389963] spid fru[9..5] : 00 00 00 00 00
[ 0.389963] ssn : BaytrailC9311E57
[ 0.390192] ACPI: bus type PCI registered
[ 0.390716] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.390740] PCI: not using MMCONFIG
[ 0.390757] PCI: Using configuration type 1 for base access
[ 0.416912] bio: create slab <bio-0> at 0
[ 0.418656] ACPI: Added _OSI(Module Device)
[ 0.418682] ACPI: Added _OSI(Processor Device)
[ 0.418702] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.418719] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.446770] ACPI: EC: Look up EC in DSDT
[ 0.572276] ACPI BIOS Bug: Warning: Incorrect checksum in table [RSCI] - 0xDD, should be 0xD7 (20130517/tbutils-324)
[ 0.575371] ACPI: SSDT 000000007bd36598 00501 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.582595] ACPI: Dynamic OEM Table Load:
[ 0.582625] ACPI: SSDT (null) 00501 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.583676] ACPI: SSDT 000000007bd35918 00433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.590826] ACPI: Dynamic OEM Table Load:
[ 0.590856] ACPI: SSDT (null) 00433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.653529] ACPI: SSDT 000000007bd38e18 0015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.660971] ACPI: Dynamic OEM Table Load:
[ 0.661001] ACPI: SSDT (null) 0015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.691679] ACPI: SSDT 000000007bd37f18 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.698842] ACPI: Dynamic OEM Table Load:
[ 0.698870] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.730655] ACPI: Interpreter enabled
[ 0.730705] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-568)
[ 0.730754] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-568)
[ 0.730797] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-568)
[ 0.730879] ACPI: (supports S0 S5)
[ 0.730897] ACPI: Using IOAPIC for interrupt routing
[ 0.731157] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.776716] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[ 0.776740] PCI: not using MMCONFIG
[ 0.776860] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.778616] ACPI: No dock devices found.
[ 0.802498] ACPI: Power Resource [USBC] (on)
[ 0.834201] ACPI: Power Resource [WWPR] (off)
[ 0.880517] ACPI: Power Resource [PLPE] (on)
[ 0.921212] ACPI: Power Resource [CLK0] (on)
[ 0.921661] ACPI: Power Resource [CLK1] (on)
[ 0.925045] ACPI: Power Resource [P28X] (off)
[ 0.925456] ACPI: Power Resource [P18X] (off)
[ 0.949602] ACPI: Power Resource [P28P] (off)
[ 0.950037] ACPI: Power Resource [P18P] (off)
[ 0.950468] ACPI: Power Resource [P28T] (off)
[ 0.950888] ACPI: Power Resource [P18T] (off)
[ 0.951331] ACPI: Power Resource [P1XT] (off)
[ 0.960362] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.960868] \_SB_.PCI0:_OSC invalid UUID
[ 0.960887] _OSC request data:1 8 0
[ 0.963581] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.963870] PCI host bridge to bus 0000:00
[ 0.963903] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.963927] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.963948] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.963969] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.963990] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.964011] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.964032] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.964053] pci_bus 0000:00: root bus resource [mem 0x7d000001-0x7f000000]
[ 0.964073] pci_bus 0000:00: root bus resource [mem 0x80000000-0x90cffffe]
[ 0.964094] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff]
[ 0.964145] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.965005] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.965074] pci 0000:00:02.0: reg 10: [mem 0x90400000-0x907fffff]
[ 0.965128] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref]
[ 0.965179] pci 0000:00:02.0: reg 20: [io 0x1000-0x1007]
[ 0.966061] pci 0000:00:03.0: [8086:0f38] type 00 class 0x048000
[ 0.966122] pci 0000:00:03.0: reg 10: [mem 0x90000000-0x903fffff]
[ 0.967066] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.967145] pci 0000:00:14.0: reg 10: [mem 0x90c00000-0x90c0ffff 64bit]
[ 0.967335] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.968213] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.968291] pci 0000:00:1a.0: reg 10: [mem 0x90b00000-0x90bfffff]
[ 0.968336] pci 0000:00:1a.0: reg 14: [mem 0x90a00000-0x90afffff]
[ 0.968573] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.969392] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.970318] pci_bus 0000:00: on NUMA node 0
[ 0.970826] \_SB_.PCI0:_OSC invalid UUID
[ 0.970846] _OSC request data:1 18 0
[ 0.970891] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.970910] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.975110] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.975895] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.976674] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.977452] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.978229] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.979005] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.979781] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.980558] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.011863] acpi root: \_SB_.PCI0 notify handler is installed
[ 1.012679] Found 1 acpi root devices
[ 1.013294] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.013320] vgaarb: loaded
[ 1.013335] vgaarb: bridge control possible 0000:00:02.0
[ 1.014457] SCSI subsystem initialized
[ 1.014671] ACPI: bus type USB registered
[ 1.014887] usbcore: registered new interface driver usbfs
[ 1.014998] usbcore: registered new interface driver hub
[ 1.015228] usbcore: registered new device driver usb
[ 1.015536] media: Linux media interface: v0.10
[ 1.015625] Linux video capture interface: v2.00
[ 1.015710] pps_core: LinuxPPS API ver. 1 registered
[ 1.015727] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 1.015774] PTP clock support registered
[ 1.016943] Advanced Linux Sound Architecture Driver Initialized.
[ 1.016963] PCI: Using ACPI for IRQ routing
[ 1.016981] PCI: pci_cache_line_size set to 64 bytes
[ 1.017061] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 1.017082] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 1.017101] e820: reserve RAM buffer [mem 0x796ce000-0x7bffffff]
[ 1.017120] e820: reserve RAM buffer [mem 0x7c61b000-0x7fffffff]
[ 1.017139] e820: reserve RAM buffer [mem 0x7cd00000-0x7fffffff]
[ 1.018469] ------------[ cut here ]------------
[ 1.018505] WARNING: at ../../../../../../linux/kernel/net/wireless/reg.c:434 regulatory_init+0xa2/0x118()
[ 1.018519] db.txt is empty, you should update it...
[ 1.018531] Modules linked in:[ 1.018543]
[ 1.018560] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.62-x86_64_byt #3
[ 1.018575] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 1.018589] 0000000000000009 ffff8800728d3dd0 ffffffff829bceff ffff8800728d3e08
[ 1.018627] ffffffff820ae8a1 0000000000000000 ffffffff832ae0cc 0000000000000167
[ 1.018657] 0000000000000000 0000000000000000 ffff8800728d3e68 ffffffff820ae90d
[ 1.018689] Call Trace:
[ 1.018722] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 1.018750] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 1.018775] [<ffffffff832ae0cc>] ? ipsec_pfkey_init+0x7d/0x7d
[ 1.018799] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 1.018827] [<ffffffff8235261d>] ? __raw_spin_lock_init+0x2d/0x50
[ 1.018851] [<ffffffff832ae249>] regulatory_init+0xa2/0x118
[ 1.018876] [<ffffffff832ae12f>] cfg80211_init+0x63/0xdb
[ 1.018903] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 1.018929] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 1.018951] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 1.018975] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 1.018997] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 1.019020] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 1.019043] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 1.019085] ---[ end trace 48c955fa37ad7d9a ]---
[ 1.019525] nfc: nfc_init: NFC Core ver 0.1
[ 1.019661] NET: Registered protocol family 39
[ 1.020621] hsu core clock 100 M
[ 1.020636] VLV2: fix up PCI interrupt routing
[ 1.020661] Switching to clocksource refined-jiffies
[ 1.020804] cfg80211: Calling CRDA to update world regulatory domain
[ 1.137346] pnp: PnP ACPI init
[ 1.137457] ACPI: bus type PNP registered
[ 1.137789] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.138298] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.138960] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.139369] system 00:03: [io 0x0680-0x069f] has been reserved
[ 1.139400] system 00:03: [io 0x0400-0x047f] has been reserved
[ 1.139425] system 00:03: [io 0x0500-0x05fe] has been reserved
[ 1.139449] system 00:03: [io 0x0600-0x061f] has been reserved
[ 1.139473] system 00:03: [io 0x164e-0x164f] has been reserved
[ 1.139510] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.140394] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.184998] vlv_gpio 00:05: \_SB.GPO0: gpio base 0
[ 1.185049] vlv_gpio 00:05: Plug and Play ACPI device, IDs INT33fc (active)
[ 1.197121] vlv_gpio 00:06: \_SB.GPO1: gpio base 102
[ 1.197171] vlv_gpio 00:06: Plug and Play ACPI device, IDs INT33fc (active)
[ 1.215774] vlv_gpio 00:07: \_SB.GPO2: gpio base 130
[ 1.215824] vlv_gpio 00:07: Plug and Play ACPI device, IDs INT33fc (active)
[ 1.221040] pnp 00:08: unknown resource type 19 in _CRS
[ 1.221066] pnp 00:08: can't evaluate _CRS: 1
[ 1.221339] pnp 00:08: Plug and Play ACPI device, IDs SMB0349 (active)
[ 1.222748] pnp 00:09: unknown resource type 17 in _CRS
[ 1.222773] pnp 00:09: can't evaluate _CRS: 1
[ 1.223033] pnp 00:09: Plug and Play ACPI device, IDs INTcf1b (active)
[ 1.223309] pnp 00:0a: unknown resource type 17 in _CRS
[ 1.223333] pnp 00:0a: can't evaluate _CRS: 1
[ 1.223575] pnp 00:0a: Plug and Play ACPI device, IDs INT33fb (active)
[ 1.223850] pnp 00:0b: unknown resource type 17 in _CRS
[ 1.223873] pnp 00:0b: can't evaluate _CRS: 1
[ 1.224127] pnp 00:0b: Plug and Play ACPI device, IDs INTcf1c (active)
[ 1.226326] pnp 00:0c: unknown resource type 19 in _CRS
[ 1.226351] pnp 00:0c: can't evaluate _CRS: 1
[ 1.226599] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c50 (active)
[ 1.227497] pnp 00:0d: unknown resource type 19 in _CRS
[ 1.227523] pnp 00:0d: can't evaluate _CRS: 1
[ 1.227785] pnp 00:0d: Plug and Play ACPI device, IDs INT33f4 (active)
[ 1.228766] pnp 00:0e: unknown resource type 19 in _CRS
[ 1.228790] pnp 00:0e: can't evaluate _CRS: 1
[ 1.229093] pnp 00:0e: Plug and Play ACPI device, IDs INT33fe (active)
[ 1.230162] pnp 00:0f: unknown resource type 17 in _CRS
[ 1.230187] pnp 00:0f: can't evaluate _CRS: 1
[ 1.230464] pnp 00:0f: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active)
[ 1.230925] pnp 00:10: Plug and Play ACPI device, IDs INT33bd (active)
[ 1.231192] pnp: PnP ACPI: found 17 devices
[ 1.231211] ACPI: bus type PNP unregistered
[ 1.246525] Switching to clocksource acpi_pm
[ 1.246928] gsl_platform_init gsl_platform_init:
[ 1.247449] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 1.247476] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 1.247497] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 1.247518] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 1.247538] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 1.247557] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 1.247578] pci_bus 0000:00: resource 10 [mem 0x7d000001-0x7f000000]
[ 1.247598] pci_bus 0000:00: resource 11 [mem 0x80000000-0x90cffffe]
[ 1.247617] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed40fff]
[ 1.247846] NET: Registered protocol family 2
[ 1.249426] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 1.249846] TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
[ 1.252374] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.252523] TCP: reno registered
[ 1.252621] UDP hash table entries: 1024 (order: 5, 163840 bytes)
[ 1.252990] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
[ 1.254081] NET: Registered protocol family 1
[ 1.254178] pci 0000:00:02.0: Boot video device
[ 1.346770] pci 0000:00:14.0: power state changed by ACPI to D0
[ 1.347476] PCI: CLS 0 bytes, default 64
[ 1.348064] Trying to unpack rootfs image as initramfs...
[ 1.740378] Freeing initrd memory: 3304k freed
[ 1.744011] platform RTL8723:00: wlan-enable GPIO 150 found
[ 1.744406] wlan_en_acpi: 1800 mV
[ 1.756052] intel_bytcr_bcntl 1-0023: I2C SMbus Read error:-121
[ 1.756077] intel_bytcr_bcntl 1-0023: bcntl init failed
[ 1.773656] i2c_designware 80860F41:04: _SEM=1
[ 1.773682] i2c_designware 80860F41:04: Share controller with PUNIT
[ 1.779835] Dollar Cove: IC_TYPE 0x51
[ 1.779874] EM:OEM0 table found, size=132
[ 1.779904] EM:OEM0 table found, size=132
[ 1.840696] intel_mid_i2c_pmic 5-0034: PMIC IRQ Base:456
[ 1.843074] intel_mid_i2c_pmic: probe of 5-0068 failed with error -16
[ 1.846500] Scanning for low memory corruption every 60 seconds
[ 1.847029] cryptomgr_test (42) used greatest stack depth: 7072 bytes left
[ 1.857237] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
[ 1.857513] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
[ 1.857787] sha512_ssse3: Using SSSE3 optimized SHA-512 implementation
[ 1.858070] AVX or AES-NI instructions are not detected.
[ 1.858088] AVX instructions are not detected.
[ 1.858101] AVX instructions are not detected.
[ 1.858113] AVX instructions are not detected.
[ 1.858124] AVX instructions are not detected.
[ 1.858136] AVX2 or AES-NI instructions are not detected.
[ 1.858147] AVX2 instructions are not detected.
[ 1.862121] console [pstore-1] enabled
[ 1.862205] ramoops: attached 0x219000 at 0xfde7000, ecc: 0/0
[ 1.863172] regulator_init: No Regulator Devices Found for BYT_CR :: Version NOT DETECTED !!
[ 1.866006] camera pdata: I2C bus = 2, name = ov2685, irq = 0x 0, addr = 0x3c
[ 1.866041] camera pdata: I2C bus = 2, name = ov2685f, irq = 0x 0, addr = 0x3c
[ 1.866066] camera pdata: I2C bus = 2, name = ov5670, irq = 0x 0, addr = 0x3c
[ 1.866089] camera pdata: I2C bus = 2, name = gc2155, irq = 0x 0, addr = 0x3c
[ 1.866148] camera pdata: I2C bus = 2, name = gc2235b, irq = 0x 0, addr = 0x3c
[ 1.866170] camera pdata: I2C bus = 2, name = hm2056, irq = 0x 0, addr = 0x24
[ 1.866191] camera pdata: I2C bus = 1, name = hm2056f, irq = 0x 0, addr = 0x24
[ 1.866212] camera pdata: I2C bus = 2, name = gc5004, irq = 0x 0, addr = 0x36
[ 1.866234] camera pdata: I2C bus = 2, name = ov5648, irq = 0x 0, addr = 0x36
[ 1.866255] camera pdata: I2C bus = 2, name = hm5040, irq = 0x 0, addr = 0x1b
[ 1.866277] camera pdata: I2C bus = 2, name = ov2680b, irq = 0x 0, addr = 0x36
[ 1.866299] camera pdata: I2C bus = 2, name = ov8858, irq = 0x 0, addr = 0x10
[ 1.866317] camera pdata: I2C bus = 2, name = ov8858, irq = 0x 0, addr = 0x36
[ 1.866335] camera pdata: I2C bus = 2, name = gc0339, irq = 0x 0, addr = 0x46
[ 1.866356] camera pdata: I2C bus = 1, name = ov2722, irq = 0x 0, addr = 0x36
[ 1.866377] camera pdata: I2C bus = 2, name = ov7736, irq = 0x 0, addr = 0x3c
[ 1.866399] camera pdata: I2C bus = 2, name = ov2680f, irq = 0x 0, addr = 0x10
[ 1.866421] camera pdata: I2C bus = 1, name = ov2680f, irq = 0x 0, addr = 0x10
[ 1.866442] camera pdata: I2C bus = 1, name = gc0310, irq = 0x 0, addr = 0x47
[ 1.866460] camera pdata: I2C bus = 2, name = gc0310, irq = 0x 0, addr = 0x48
[ 1.866478] camera pdata: I2C bus = 2, name = gc2235f, irq = 0x 0, addr = 0x3c
[ 1.866500] camera pdata: I2C bus = 1, name = gc0310soc, irq = 0x 0, addr = 0x49
[ 1.866521] camera pdata: I2C bus = 2, name = gc0310soc, irq = 0x 0, addr = 0x50
[ 1.866542] camera pdata: I2C bus = 2, name = bf3905, irq = 0x 0, addr = 0x6f
[ 1.866563] camera pdata: I2C bus = 2, name = bf3a20, irq = 0x 0, addr = 0x6f
[ 1.867764] Initialise module verification
[ 1.868049] audit: initializing netlink socket (disabled)
[ 1.868122] type=2000 audit(1452108535.659:1): initialized
[ 2.098100] fuse init (API version 7.22)
[ 2.098847] msgmni has been set to 3762
[ 2.099453] SELinux: Registering netfilter hooks
[ 2.100680] cryptomgr_test (94) used greatest stack depth: 6800 bytes left
[ 2.105293] Key type asymmetric registered
[ 2.105320] Asymmetric key parser 'x509' registered
[ 2.105691] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 2.105715] io scheduler noop registered
[ 2.105734] io scheduler deadline registered
[ 2.106245] io scheduler cfq registered (default)
[ 2.106877] virtual_gpio INT0002:00: virtual gpio pin = 2
[ 2.107873] efifb: probing for efifb
[ 2.107968] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000800000, using 1876k, total 1875k
[ 2.107990] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 2.108004] efifb: scrolling: redraw
[ 2.108025] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.108293] fb0: EFI VGA frame buffer device
[ 2.108357] intel_idle: MWAIT substates: 0x33000020
[ 2.108378] intel_idle: v0.4 model 0x37
[ 2.108395] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.109098] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.109139] ACPI: Power Button [PWRF]
[ 2.109833] ACPI: Requesting acpi_cpufreq
[ 2.178037] intel_mid_dma_acpi: dma_acpi_probe for ADMA0F28
[ 2.179358] intel_mid_dma_acpi: dma_acpi_probe for INTL9C60[ 2.180886] intel_mid_dma_acpi: dma_acpi_probe for INTL9C60
[ 2.185296] LDO_2: 1800 <--> 3300 mV at 2900 mV normal
[ 2.189376] GPIO_1: 1800 <--> 3300 mV at 3300 mV normal
[ 2.191819] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.212593] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.214885] Non-volatile memory driver v1.3
[ 2.215034] Linux agpgart interface v0.103
[ 2.215410] [drm] Initialized drm 1.1.0 20060810
[ 2.227818] brd: module loaded
[ 2.234050] loop: module loaded
[ 2.234654] mei_txe 0000:00:1a.0: setting latency timer to 64
[ 2.235484] mei_txe 0000:00:1a.0: irq 103 for MSI/MSI-X
[ 2.287425] tun: Universal TUN/TAP device driver, 1.6
[ 2.287452] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 2.287609] PPP generic driver version 2.4.2
[ 2.287859] PPP BSD Compression module registered
[ 2.287880] PPP Deflate Compression module registered
[ 2.287921] PPP MPPE Compression module registered
[ 2.287940] NET: Registered protocol family 24
[ 2.288099] usbcore: registered new interface driver asix
[ 2.288192] usbcore: registered new interface driver cdc_ether
[ 2.288282] usbcore: registered new interface driver cdc_subset
[ 2.288435] usbcore: registered new interface driver cdc_ncm
[ 2.289118] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.289141] ehci-pci: EHCI PCI platform driver
[ 2.289332] USH Host Controller 0000:00:14.0: Don't match this driver
[ 2.289550] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[ 2.289667] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2.289695] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.289975] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.290558] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.290690] xhci_hcd 0000:00:14.0: irq 104 for MSI/MSI-X
[ 2.291002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.291029] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.291052] usb usb1: Product: xHCI Host Controller
[ 2.291072] usb usb1: Manufacturer: Linux 3.10.62-x86_64_byt xhci_hcd
[ 2.291092] usb usb1: SerialNumber: 0000:00:14.0
[ 2.291652] xHCI xhci_add_endpoint called for root hub
[ 2.291674] xHCI xhci_check_bandwidth called for root hub
[ 2.291905] hub 1-0:1.0: USB hub found
[ 2.291957] hub 1-0:1.0: 6 ports detected
[ 2.346728] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.347011] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.347213] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.347239] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.347261] usb usb2: Product: xHCI Host Controller
[ 2.347281] usb usb2: Manufacturer: Linux 3.10.62-x86_64_byt xhci_hcd
[ 2.347301] usb usb2: SerialNumber: 0000:00:14.0
[ 2.347828] xHCI xhci_add_endpoint called for root hub
[ 2.347850] xHCI xhci_check_bandwidth called for root hub
[ 2.348087] hub 2-0:1.0: USB hub found
[ 2.348137] hub 2-0:1.0: 1 port detected
[ 2.397133] usbcore: registered new interface driver cdc_acm
[ 2.397157] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.397347] usbcore: registered new interface driver usb-storage
[ 2.397436] usbcore: registered new interface driver ums-sddr09
[ 2.397518] usbcore: registered new interface driver ums-sddr55
[ 2.397741] usbcore: registered new interface driver usbserial
[ 2.397829] usbcore: registered new interface driver usbserial_generic
[ 2.397918] usbserial: USB Serial support registered for generic
[ 2.398093] usbcore: registered new interface driver option
[ 2.398171] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.398439] usbcore: registered new interface driver qcserial
[ 2.398523] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.398631] usbcore: registered new interface driver sierra
[ 2.398707] usbserial: USB Serial support registered for Sierra USB modem
[ 2.398814] usbcore: registered new interface driver usb_tm
[ 2.399852] usbcore: registered new interface driver xpad
[ 2.399953] usbcore: registered new interface driver usb_acecad
[ 2.400049] usbcore: registered new interface driver aiptek
[ 2.400152] usbcore: registered new interface driver gtco
[ 2.400255] usbcore: registered new interface driver hanwang
[ 2.400347] usbcore: registered new interface driver kbtab
[ 2.400452] usbcore: registered new interface driver wacom
[ 2.401426] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 2.401524] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 2.401619] i2c /dev entries driver
[ 2.434314] thermal thermal_zone0: failed to read out thermal zone 0
[ 2.469222] dollar_cove_battery dollar_cove_battery: IRQ No:472
[ 2.473451] dollar_cove_battery dollar_cove_battery: IRQ No:473
[ 2.477368] dollar_cove_battery dollar_cove_battery: IRQ No:474
[ 2.481150] dollar_cove_battery dollar_cove_battery: IRQ No:475
[ 2.485695] dollar_cove_battery dollar_cove_battery: IRQ No:480
[ 2.489328] dollar_cove_battery dollar_cove_battery: IRQ No:481
[ 2.505324] dollar_cove_charger dollar_cove_charger: IRQ No:460
[ 2.509196] dollar_cove_charger dollar_cove_charger: IRQ No:466
[ 2.513097] dollar_cove_charger dollar_cove_charger: IRQ No:467
[ 2.517826] dollar_cove_charger dollar_cove_charger: IRQ No:468
[ 2.521110] dollar_cove_charger dollar_cove_charger: IRQ No:469
[ 2.525790] dollar_cove_charger dollar_cove_charger: IRQ No:476
[ 2.529244] dollar_cove_charger dollar_cove_charger: IRQ No:477
[ 2.533153] dollar_cove_charger dollar_cove_charger: IRQ No:478
[ 2.537081] dollar_cove_charger dollar_cove_charger: IRQ No:479
[ 2.563189] unable to find transceiver of type USB2 PHY
[ 2.563219] dollar_cove_charger dollar_cove_charger: Failed to get otg transceiver!!
[ 2.567801] unable to find transceiver of type USB2 PHY
[ 2.567824] failure to get otg transceiver
[ 2.568738] intel_rapl: RAPL domain uncore detection failed
[ 2.568774] intel_rapl: RAPL domain dram detection failed
[ 2.570762] coretemp: Enabled Aux0/Aux1 interrupts for coretemp
[ 2.570951] coretemp: Enabled Aux0/Aux1 interrupts for coretemp
[ 2.571140] coretemp: Enabled Aux0/Aux1 interrupts for coretemp
[ 2.571689] coretemp: Enabled Aux0/Aux1 interrupts for coretemp
[ 2.574665] device-mapper: uevent: version 1.0.3
[ 2.575187] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel at redhat.com
[ 2.576852] cpuidle: using governor ladder
[ 2.578000] cpu 3: max_range = 20000, #buckets = 2000, width = 10
[ 2.578376] cpu 2: max_range = 20000, #buckets = 2000, width = 10
[ 2.578632] cpu 1: max_range = 20000, #buckets = 2000, width = 10
[ 2.578926] cpu 0: max_range = 20000, #buckets = 2000, width = 10
[ 2.578948] cpuidle: using governor menu
[ 2.579028] sdhci: Secure Digital Host Controller Interface driver
[ 2.579046] sdhci: Copyright(c) Pierre Ossman
[ 2.580042] mmc0: no vqmmc regulator found
[ 2.580511] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 2.582063] mmc1: no vqmmc regulator found
[ 2.583452] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 2.616731] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 2.617147] mmc2: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 2.622110] EFI Variables Facility v0.08 2004-May-17
[ 2.631572] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.635931] usbcore: registered new interface driver usbhid
[ 2.635953] usbhid: USB HID core driver
[ 2.636977] zram: Created 1 device(s) ...
[ 2.637905] ashmem: initialized
[ 2.638385] logger: created 512K log 'log_main'
[ 2.638652] logger: created 256K log 'log_events'
[ 2.638747] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[ 2.638773] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.638794] usb 1-1: Product: USB2.0 Hub
[ 2.639420] logger: created 256K log 'log_radio'
[ 2.639773] logger: created 256K log 'log_system'
[ 2.640176] hub 1-1:1.0: USB hub found
[ 2.640656] hub 1-1:1.0: 4 ports detected
[ 2.647253] dollar_cove_adc dollar_cove_adc: dc_xpwr adc probed
[ 2.647945] intel_mid_gps probe called
[ 2.649702] input: sx9500 as /devices/platform/80860F41:02/i2c-3/3-0028/input/input1
[ 2.650545] emmc_ipanic: init success
[ 2.650697] mdm_ctrl: probing mdm_ctrl
[ 2.650721] mdm_ctrl modem_ctrl_get_dev_data: No platform data available, checking ACPI...
[ 2.650738] retrieve_modem_platform_data: Retrieving modem info from ACPI for device MCD0001:00
[ 2.650758] retrieve_acpi_modem_data: Getting platform data...
[ 2.650803] get_acpi_param: acpi_evaluate_object, status:0
[ 2.650832] get_acpi_param: acpi_evaluate_object, status:5
[ 2.650849] get_acpi_param: ERROR 5 evaluating ID:CONF
[ 2.650863] CONF field is empty. Might be a Baytrail FFRD8 board
[ 2.650876] minjie skip PMIC in retrieve_acpi_modem_data[ 2.651500] minjie skip EPWR in retrieve_acpi_modem_data
[ 2.651517] retrieve_acpi_modem_data: zou juan cpu info setup
[ 2.651541] zou juan set finished, entries[0]: (null), entries[1]: (null), entries[2]: (null), entries[3]: (null)
[ 2.651559] retrieve_modem_platform_data: creates sysfs entry for device named MCD0001:00
[ 2.651606] mdm_ctrl: cpu: 4 pmic: 0.
[ 2.651622] mdm_ctrl: number of modems: 1
[ 2.652111] minjie skip mdm->pdata->mdm_ver != MODEM_2230
[ 2.652131] mdm_ctrl mdm_ctrl_module_probe: Modem 0 initialized
[ 2.652149] mdm_ctrl: MCD initialization successful
[ 2.652232] OSNIB mechanism is not available on this platform
[ 2.652252] Intel OSIP Driver v1.00
[ 2.652594] block disk not found!
[ 2.652616] access_osip_record: get_bdev failed!
[ 2.652698] block disk not found!
[ 2.652717] access_osip_record: get_bdev failed!
[ 2.652788] block disk not found!
[ 2.652806] access_osip_record: get_bdev failed!
[ 2.653282] EM:OEM0 table found, size=132
[ 2.654350] bq24192 1-006b: I2C SMbus Read error:-121
[ 2.654377] bq24192 1-006b: i2c read err:-121
[ 2.654397] bq24192 1-006b: i2c read err:-5
[ 2.654439] bq24192: probe of 1-006b failed with error -5
[ 2.655164] Found a Designware HSU
[ 2.655504] 80860F0A:00: ttyMFD0 at MMIO 0x90d47000 (irq = 39) is a hsu_bt_port_p
[ 2.656076] Found a Designware HSU
[ 2.656383] 80860F0A:01: ttyMFD1 at MMIO 0x90d4d000 (irq = 40) is a hsu_gps_port_p
[ 2.656987] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.657168] iTCO_wdt: Found a TCO device (TCOBASE=0x0460)
[ 2.657347] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) policy=0x0
[ 2.658013] pwm-byt-plat 80860F09:00: PWM device probed: pwm_num=0, mmio_base=ffffc90001a46000 clk_khz=25000
[ 2.658223] pwm-byt-plat 80860F09:01: PWM device probed: pwm_num=1, mmio_base=ffffc90001a48000 clk_khz=25000
[ 2.658662] rmnet_async_init++
[ 2.658683] rmnet_init++
[ 2.658741] rmnet_setup++
[ 2.659462] rmnet_setup++
[ 2.660163] rmnet_setup++
[ 2.661021] mmc0: BKOPS_EN bit is not set
[ 2.661228] 3RMNET: registering line disc successful.
[ 2.663780] INFO: I2S DRIVER loading... ver: 1.3.0 cpu=0
[ 2.663998] INFO: I2S DRIVER DIV CTRL/ISRX active - CPU BYT.
[ 2.664025] SSP I2S ACPI driver : allocated drv_data=ffff880076e77828
[ 2.664495] SSP I2S driver : ACPI probe for **HID=SSPX0000** , drv_data=ffff880076e77828
[ 2.664518] SSP I2S driver : IFWI start IA =0x90ea1000 end=0x90ea1fff
[ 2.668584] INFO: I2S DRIVER init OK
[ 2.668793] usbcore: registered new interface driver snd-usb-audio
[ 2.669834] snd_intel_sst: INFO: ******** SST DRIVER loading.. Ver: 3.0.8
[ 2.670948] snd_intel_sst: Overriding bdata for byt-crv2
[ 2.672116] snd_intel_sst: sst_acpi_probe successfully done!
[ 2.672387] snd_intel_sst: runtime_idle called
[ 2.672412] snd_intel_sst: runtime_suspend called
[ 2.672996] mid_ssp: ssp_soc_dai_init: SSP DAI: FCT ssp_soc_dai_init called
[ 2.673104] mid_ssp: ssp_dai_probe: SSP DAI: FCT ssp_dai_probe enters
[ 2.673128] mid_ssp: ssp_dai_probe: ssp_info address ffff88007734a778
[ 2.673589] mid_ssp: ssp_dai_probe: SSP DAI: FCT ssp_dai_probe leaves 0
[ 2.677505] u32 classifier
[ 2.677528] Actions configured
[ 2.677553] Netfilter messages via NETLINK v0.30.
[ 2.677692] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.678475] mmc0: new HS200 MMC card at address 0001
[ 2.678862] ctnetlink v0.93: registering with nfnetlink.
[ 2.679056] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.679075] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.679708] xt_time: kernel timezone is -0000
[ 2.680209] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.680608] arp_tables: (C) 2002 David S. Miller
[ 2.680730] TCP: cubic registered
[ 2.680750] Initializing XFRM netlink socket
[ 2.681836] NET: Registered protocol family 10
[ 2.684311] mip6: Mobile IPv6
[ 2.684395] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.684944] sit: IPv6 over IPv4 tunneling driver
[ 2.685921] NET: Registered protocol family 17
[ 2.685992] NET: Registered protocol family 15
[ 2.686100] Key type dns_resolver registered
[ 2.687387] mmcblk0: mmc0:0001 NCard 28.9 GiB
[ 2.691615] [drm] Memory usable by graphics device = 2048M
[ 2.691650] checking generic (80000000 1d5000) vs hw (80000000 10000000)
[ 2.691669] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 2.691998] i915 0000:00:02.0: setting latency timer to 64
[ 2.697979] i915 0000:00:02.0: irq 105 for MSI/MSI-X
[ 2.698067] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.698087] [drm] Driver supports precise vblank timestamp query.
[ 2.698183] [drm:i915_stolen_to_physical] *ERROR* conflict detected with stolen region: [0x7d000000 - 0x7f000000]
[ 2.699010] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
[ 2.700742] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.742811] [drm] Falling back to bit banging on pin 5
[ 2.836682] tsc: Refined TSC clocksource calibration: 1333.333 MHz
[ 2.836716] Switching to clocksource tsc
[ 2.916953] usb 1-1.2: new low-speed USB device number 3 using xhci_hcd
[ 2.926691] [drm:intel_hdmi_get_edid] *ERROR* Get_hdmi cant read edid
[ 2.939444] [drm:valleyview_enable_rps] *ERROR* GT fifo had a previous error 10
[ 2.947014] usb 1-1.2: New USB device found, idVendor=0603, idProduct=0002
[ 2.947047] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.947070] usb 1-1.2: Product: USB Composite Device
[ 2.947089] usb 1-1.2: Manufacturer: SINO WEALTH
[ 2.948541] SASX9500:00 3-0028: Err: return -121 when write i2c reg 7f=de
[ 2.948571] SASX9500:00 3-0028: init chip -121
[ 2.949273] SASX9500:00 3-0028: Err: return -121 when read i2c reg 06
[ 2.953119] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.953619] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[ 2.954056] hid-generic 0003:0603:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-1.2/input0
[ 2.967161] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.967503] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 2.967866] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.967976] emmc_ipanic: panic partition found, label:panic, device:mmcblk0p2
[ 2.978165] emmc_ipanic: emmc_panic_notify_add: bad magic 0, no data available
[ 2.986462] Martin Debug: gsl_ts_probe ++
[ 2.988342] [tp-gsl] 0xfc = {0x80360000}
[ 3.003142] mmc1: new high speed SDIO card at address 0001
[ 3.017237] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input4
[ 3.017862] hid-generic 0003:0603:0002.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-1.2/input1
[ 3.097514] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
[ 3.118514] usb 1-1.4: New USB device found, idVendor=0781, idProduct=5590
[ 3.118550] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.118573] usb 1-1.4: Product: Ultra
[ 3.118592] usb 1-1.4: Manufacturer: SanDisk
[ 3.118612] usb 1-1.4: SerialNumber: 4C530001071024108515
[ 3.119727] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 3.120399] scsi0 : usb-storage 1-1.4:1.0
[ 3.387039] =============gsl_load_fw start==============
[ 4.117966] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
[ 4.119056] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.120415] sd 0:0:0:0: [sda] 30375936 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 4.121354] sd 0:0:0:0: [sda] Write Protect is off
[ 4.121385] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.121991] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.132112] sda: sda1
[ 4.135179] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 7.572472] =============gsl_load_fw end==============
[ 7.700215] input: GSL_TP as /devices/platform/80860F41:03/i2c-4/4-0040/input/input5
[ 7.701014] Successfully added driver GSL_TP
[ 7.702102] lesskey_pnp_probe, num = 1
[ 7.702674] lesskey [ 0]: name = power_btn, gpio = -22
[ 7.702697] lesskey_pnp_probe, num = 1
[ 7.703207] lesskey [ 0]: name = home_btn, gpio = 151
[ 7.703229] lesskey_pnp_probe, num = 2
[ 7.703731] lesskey [ 0]: name = volume_up, gpio = 1
[ 7.704236] lesskey [ 1]: name = volume_down, gpio = 0
[ 7.704516] VLV2: warn punit OS is Android
[ 7.704556] Informing PUnit we are running Android
[ 7.705269] Loading module verification certificates
[ 7.712359] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 83a84231b86604dd94e72236f7b0fe1f1823ed84'
[ 7.712486] registered taskstats version 1
[ 7.717670] LDO_2: disabling
[ 7.721767] wlan_en_acpi: disabling
[ 7.721803] regulator-dummy: disabling
[ 7.722669] Magic number: 0:361:495
[ 7.722973] console [netcon0] enabled
[ 7.722991] netconsole: network logging started
[ 7.723308] init: failed to probe driver -19
[ 7.723519] ------------[ cut here ]------------
[ 7.723558] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.723575] sysfs: kobject ??v without dirent
[ 7.723588] Modules linked in:
[ 7.723617] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.723634] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.723650] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.723696] ffffffff820ae8a1 ffffffff831741a0 ffff8800768f9810 00000000ffffffed
[ 7.723734] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.723774] Call Trace:
[ 7.723808] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.723838] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.723865] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.723893] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.723918] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.723943] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.723970] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.723996] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.724019] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.724048] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.724076] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.724100] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.724125] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.724150] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.724174] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.724199] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.724218] ---[ end trace 48c955fa37ad7d9c ]---
[ 7.724233] ------------[ cut here ]------------
[ 7.724256] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.724271] sysfs: kobject ??v without dirent
[ 7.724284] Modules linked in:
[ 7.724310] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.724327] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.724341] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.724381] ffffffff820ae8a1 ffffffff83174160 ffff8800768f9810 00000000ffffffed
[ 7.724419] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.724458] Call Trace:
[ 7.724486] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.724513] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.724539] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.724565] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.724590] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.724615] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.724641] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.724664] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.724688] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.724715] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.724741] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.724765] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.724789] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.724813] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.724837] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.724862] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.724881] ---[ end trace 48c955fa37ad7d9d ]---
[ 7.724896] ------------[ cut here ]------------
[ 7.724919] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.724934] sysfs: kobject ??v without dirent
[ 7.724947] Modules linked in:
[ 7.724973] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.724989] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.725003] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.725043] ffffffff820ae8a1 ffffffff83174120 ffff8800768f9810 00000000ffffffed
[ 7.725081] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.725120] Call Trace:
[ 7.725148] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.725174] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.725200] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.725226] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.725251] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.725276] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.725301] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.725325] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.725348] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.725375] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.725401] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.725425] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.725449] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.725473] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.725497] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.725522] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.725540] ---[ end trace 48c955fa37ad7d9e ]---
[ 7.725555] ------------[ cut here ]------------
[ 7.725578] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.725593] sysfs: kobject ??v without dirent
[ 7.725606] Modules linked in:
[ 7.725632] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.725648] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.725662] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.725702] ffffffff820ae8a1 ffffffff831740e0 ffff8800768f9810 00000000ffffffed
[ 7.725740] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.725779] Call Trace:
[ 7.725807] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.725833] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.725859] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.725885] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.725910] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.725934] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.725960] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.725984] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.726007] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.726034] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.726060] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.726084] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.726108] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.726132] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.726156] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.726181] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.726199] ---[ end trace 48c955fa37ad7d9f ]---
[ 7.726214] ------------[ cut here ]------------
[ 7.726237] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.726252] sysfs: kobject ??v without dirent
[ 7.726264] Modules linked in:
[ 7.726290] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.726306] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.726321] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.726361] ffffffff820ae8a1 ffffffff831740a0 ffff8800768f9810 00000000ffffffed
[ 7.726398] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.726438] Call Trace:
[ 7.726465] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.726492] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.726517] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.726543] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.726568] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.726593] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.726673] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.726701] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.726725] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.726752] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.726779] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.726803] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.726827] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.726851] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.726875] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.726900] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.726919] ---[ end trace 48c955fa37ad7da0 ]---
[ 7.726935] ------------[ cut here ]------------
[ 7.726959] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.726974] sysfs: kobject ??v without dirent
[ 7.726987] Modules linked in:
[ 7.727013] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.727029] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.727044] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.727085] ffffffff820ae8a1 ffffffff83174060 ffff8800768f9810 00000000ffffffed
[ 7.727123] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.727162] Call Trace:
[ 7.727190] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.727216] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.727242] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.727268] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.727293] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.727318] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.727344] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.727367] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.727391] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.727418] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.727443] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.727467] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.727491] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.727516] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.727539] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.727564] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.727582] ---[ end trace 48c955fa37ad7da1 ]---
[ 7.727598] ------------[ cut here ]------------
[ 7.727621] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.727636] sysfs: kobject ??v without dirent
[ 7.727649] Modules linked in:
[ 7.727674] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.727690] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.727705] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.727745] ffffffff820ae8a1 ffffffff83174020 ffff8800768f9810 00000000ffffffed
[ 7.727782] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.727822] Call Trace:
[ 7.727849] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.727876] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.727902] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.727927] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.727952] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.727977] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.728003] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.728026] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.728050] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.728077] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.728103] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.728126] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.728150] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.728175] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.728198] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.728223] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.728241] ---[ end trace 48c955fa37ad7da2 ]---
[ 7.728257] ------------[ cut here ]------------
[ 7.728279] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.728295] sysfs: kobject ??v without dirent
[ 7.728308] Modules linked in:
[ 7.728333] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.728349] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.728364] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.728404] ffffffff820ae8a1 ffffffff83173fe0 ffff8800768f9810 00000000ffffffed
[ 7.728441] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.728481] Call Trace:
[ 7.728508] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.728535] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.728561] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.728586] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.728611] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.728636] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.728662] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.728685] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.728708] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.728735] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.728761] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.728785] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.728809] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.728833] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.728857] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.728882] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.728900] ---[ end trace 48c955fa37ad7da3 ]---
[ 7.728915] ------------[ cut here ]------------
[ 7.728938] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.728953] sysfs: kobject ??v without dirent
[ 7.728966] Modules linked in:
[ 7.728991] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.729007] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.729022] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.729062] ffffffff820ae8a1 ffffffff83173fa0 ffff8800768f9810 00000000ffffffed
[ 7.729099] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.729139] Call Trace:
[ 7.729166] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.729193] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.729219] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.729245] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.729270] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.729294] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.729320] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.729344] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.729367] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.729394] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.729420] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.729444] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.729467] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.729492] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.729515] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.729540] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.729558] ---[ end trace 48c955fa37ad7da4 ]---
[ 7.729574] ------------[ cut here ]------------
[ 7.729597] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.729612] sysfs: kobject ??v without dirent
[ 7.729625] Modules linked in:
[ 7.729651] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.729667] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.729681] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.729721] ffffffff820ae8a1 ffffffff83173f60 ffff8800768f9810 00000000ffffffed
[ 7.729758] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.729798] Call Trace:
[ 7.729825] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.729851] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.729877] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.729902] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.729927] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.729952] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.729978] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.730001] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.730025] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.730051] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.730077] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.730101] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.730125] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.730149] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.730173] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.730198] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.730216] ---[ end trace 48c955fa37ad7da5 ]---
[ 7.730231] ------------[ cut here ]------------
[ 7.730254] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.730269] sysfs: kobject ??v without dirent
[ 7.730282] Modules linked in:
[ 7.730307] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.730323] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.730338] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.730377] ffffffff820ae8a1 ffffffff83173f20 ffff8800768f9810 00000000ffffffed
[ 7.730415] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.730454] Call Trace:
[ 7.730481] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.730508] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.730533] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.730559] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.730584] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.730609] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.730635] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.730658] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.730681] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.730708] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.730734] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.730758] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.730782] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.730806] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.730830] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.730855] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.730873] ---[ end trace 48c955fa37ad7da6 ]---
[ 7.730888] ------------[ cut here ]------------
[ 7.730910] WARNING: at ../../../../../../linux/kernel/fs/sysfs/file.c:498 sysfs_attr_ns+0x99/0xa0()
[ 7.730925] sysfs: kobject ??v without dirent
[ 7.730939] Modules linked in:
[ 7.730964] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.730980] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.730994] 0000000000000009 ffff8800728d3dc8 ffffffff829bceff ffff8800728d3e00
[ 7.731034] ffffffff820ae8a1 ffffffff83173ee0 ffff8800768f9810 00000000ffffffed
[ 7.731072] 0000000000000000 0000000000000000 ffff8800728d3e60 ffffffff820ae90d
[ 7.731111] Call Trace:
[ 7.731138] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.731164] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.731190] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.731216] [<ffffffff8233fed8>] ? kobject_release+0x98/0x1b0
[ 7.731241] [<ffffffff8223a799>] sysfs_attr_ns+0x99/0xa0
[ 7.731266] [<ffffffff8223a870>] sysfs_remove_file+0x20/0x50
[ 7.731292] [<ffffffff824d6ae7>] device_remove_file+0x17/0x20
[ 7.731315] [<ffffffff8329c0fd>] init+0x1f0/0x22a
[ 7.731338] [<ffffffff8329bf0d>] ? gether_init+0x58/0x58
[ 7.731365] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.731391] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.731415] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.731439] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.731463] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.731487] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.731512] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.731530] ---[ end trace 48c955fa37ad7da7 ]---
[ 7.732233] input: gpio-lesskey as /devices/platform/gpio-lesskey.1.auto/input/input6
[ 7.733122] rtc_cmos 00:00: setting system clock to 2016-01-06 19:29:02 UTC (1452108542)
[ 7.733224] EM:OEM0 table found, size=132
[ 7.734623] max170xx_battery 1-0036: I2C SMbus Read error:-121
[ 7.734654] max170xx_battery 1-0036: reset i2c device:-121
[ 7.734681] ------------[ cut here ]------------
[ 7.734709] WARNING: at ../../../../../../linux/kernel/drivers/gpio/gpiolib.c:160 gpio_ensure_requested+0x62/0xa0()
[ 7.734724] autorequest GPIO-79
[ 7.734736] Modules linked in:
[ 7.734762] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.62-x86_64_byt #3
[ 7.734777] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 7.734791] 0000000000000009 ffff8800728d3c00 ffffffff829bceff ffff8800728d3c38
[ 7.734832] ffffffff820ae8a1 ffffffff83b31808 ffff880078a0f428 000000000000004f
[ 7.734870] ffff880077c6f028 0000000000000246 ffff8800728d3c98 ffffffff820ae90d
[ 7.734909] Call Trace:
[ 7.734938] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 7.734966] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 7.734992] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 7.735020] [<ffffffff820e613d>] ? get_parent_ip+0xd/0x50
[ 7.735045] [<ffffffff82369592>] gpio_ensure_requested+0x62/0xa0
[ 7.735071] [<ffffffff8236be96>] gpiod_direction_output+0x76/0x320
[ 7.735097] [<ffffffff829c6862>] ? _raw_spin_unlock_irqrestore+0x42/0x80
[ 7.735122] [<ffffffff8236c15b>] gpio_direction_output+0x1b/0x20
[ 7.735147] [<ffffffff820a9498>] max17042_i2c_reset_workaround+0x48/0xb0
[ 7.735176] [<ffffffff82615e0d>] max17042_probe+0x62d/0x820
[ 7.735203] [<ffffffff826157e0>] ? max17042_init_worker+0x40/0x40
[ 7.735230] [<ffffffff825f6e09>] i2c_device_probe+0xa9/0x120
[ 7.735259] [<ffffffff824db710>] driver_probe_device+0x90/0x3c0
[ 7.735286] [<ffffffff824dbb13>] __driver_attach+0x93/0xa0
[ 7.735312] [<ffffffff824dba80>] ? __device_attach+0x40/0x40
[ 7.735338] [<ffffffff824d9623>] bus_for_each_dev+0x63/0xa0
[ 7.735365] [<ffffffff824db13e>] driver_attach+0x1e/0x20
[ 7.735391] [<ffffffff824dacd0>] bus_add_driver+0x1e0/0x290
[ 7.735416] [<ffffffff8329cab1>] ? set_fake_batt_full+0xf/0xf
[ 7.735443] [<ffffffff824dc181>] driver_register+0x71/0x150
[ 7.735467] [<ffffffff8329cab1>] ? set_fake_batt_full+0xf/0xf
[ 7.735494] [<ffffffff825f5a4c>] i2c_register_driver+0x2c/0xe0
[ 7.735518] [<ffffffff8329cac3>] max17042_init+0x12/0x14
[ 7.735545] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 7.735572] [<ffffffff8325f016>] kernel_init_freeable+0x15b/0x1e0
[ 7.735596] [<ffffffff8325e853>] ? do_early_param+0x88/0x88
[ 7.735620] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.735644] [<ffffffff829a6f4e>] kernel_init+0xe/0x180
[ 7.735668] [<ffffffff829cea9c>] ret_from_fork+0x7c/0xb0
[ 7.735693] [<ffffffff829a6f40>] ? rest_init+0xd0/0xd0
[ 7.735711] ---[ end trace 48c955fa37ad7da8 ]---
[ 7.736788] max170xx_battery 1-0036: I2C SMbus Read error:-121
[ 7.736819] max170xx_battery 1-0036: reset i2c device:-121
[ 7.737872] max170xx_battery 1-0036: I2C SMbus Read error:-121
[ 7.737902] max170xx_battery 1-0036: reset i2c device:-121
[ 7.738788] max170xx_battery 1-0036: I2C SMbus Read error:-121
[ 7.738814] max170xx_battery 1-0036: reset i2c device:-121
[ 7.739677] max170xx_battery 1-0036: I2C SMbus Read error:-121
[ 7.739703] max170xx_battery 1-0036: reset i2c device:-121
[ 7.740563] max170xx_battery 1-0036: I2C SMbus Read error:-121
[ 7.740588] max170xx_battery 1-0036: reset i2c device:-121
[ 7.741627] max170xx_battery 1-0036: I2C SMbus Read error:-121
[ 7.741657] max170xx_battery 1-0036: reset i2c device:-121
[ 7.742542] max170xx_battery 1-0036: I2C SMbus Read error:-121
[ 7.742568] max170xx_battery 1-0036: reset i2c device:-121
[ 7.743431] max170xx_battery 1-0036: I2C SMbus Read error:-121
[ 7.743456] max170xx_battery 1-0036: reset i2c device:-121
[ 7.743477] max170xx_battery 1-0036: device version mismatch: ffffff87
[ 7.743522] max170xx_battery: probe of 1-0036 failed with error -5
[ 7.743878] smb347 1-0035: gpio no:132
[ 7.743909] smb347 1-0035: smb349 chip in use.
[ 7.744716] smb347 1-0035: failed to read reg 0x30: -121
[ 7.746525] smb347 1-0035: failed to read reg 0x30: -121
[ 7.748513] smb347 1-0035: failed to read reg 0x30: -121
[ 7.749569] smb347: probe of 1-0035 failed with error -121
[ 7.749990] unable to find transceiver of type USB2 PHY
[ 7.750018] vbus_warn vbus_warn: Failed to get otg transceiver!!
[ 7.750039] vbus_warn vbus_warn: vbus warn probe finished
[ 7.760109] byt_cr_thermal byt_cr_thermal: X-Power PMIC ACPI entry[INT33F4] found
[ 7.772176] CPU0 freq is capping to 498000KHz
[ 7.777737] unable to find transceiver of type USB2 PHY
[ 7.777769] dollar_cove_pwrsrc dollar_cove_pwrsrc: Failed to get otg transceiver!!
[ 7.778642] input: dollar_cove_power_button as /devices/platform/80860F41:04/i2c-5/5-0034/dollar_cove_power_button/input/input7
[ 7.787933] snd_byt_bl_rt5642: Baytrail Machine Driver byt_rt5642 registerd
[ 7.788947] Codec driver version 0.8.4 alsa 1.0.25
[ 7.861859] mid_ssp: ssp_probe: SSP DAI: FCT ssp_probe enters for CPU_DAI 1
[ 7.861893] mid_ssp: ssp_probe: SSP DAI: FCT ssp_probe ssp_config ffff880076976f80
[ 7.861914] mid_ssp: ssp_probe: SSP DAI: FCT ssp_probe enters for CPU_DAI 0
[ 7.861940] mid_ssp: ssp_probe: SSP DAI: FCT ssp_probe ssp_config ffff880076978000
[ 7.863022] byt_rt5642 AMCR0F28:00: rt5640-aif1 <-> Headset-cpu-dai mapping ok
[ 7.863425] byt_rt5642 AMCR0F28:00: rt5640-aif2 <-> Voice-cpu-dai mapping ok
[ 7.863548] compress asoc: rt5640-aif1 <-> Compress-cpu-dai mapping ok
[ 7.863955] byt_rt5642 AMCR0F28:00: snd-soc-dummy-dai <-> ssp-bt-cpu-dai mapping ok
[ 7.864387] byt_rt5642 AMCR0F28:00: snd-soc-dummy-dai <-> ssp-modem-cpu-dai mapping ok
[ 7.870648] rt5640 2-001c: ASoC: mux INR Mux has no paths
[ 7.870711] rt5640 2-001c: ASoC: mux INL Mux has no paths
[ 7.874316] input: baytrailaudio Intel MID Audio Jack as /devices/platform/AMCR0F28:00/sound/card0/input8
[ 7.878680] snd_byt_bl_rt5642: snd_byt_mc_probe successful
[ 7.879043] snd_byt_cr_aic3100: Baytrail Machine Driver byt_aic31xx registerd
[ 7.879233] ALSA device list:
[ 7.879255] #0: baytrailaudio
[ 7.886578] Freeing unused kernel memory: 1308k freed
[ 7.887720] Write protecting the kernel read-only data: 16384k
[ 7.893414] Freeing unused kernel memory: 168k freed
[ 7.900555] Freeing unused kernel memory: 364k freed
[ 7.915345] SELinux: 2048 avtab hash slots, 5493 rules.
[ 7.921432] SELinux: 2048 avtab hash slots, 5493 rules.
[ 7.921491] SELinux: 1 users, 2 roles, 442 types, 0 bools, 1 sens, 1024 cats
[ 7.921524] SELinux: 86 classes, 5493 rules
[ 7.924056] SELinux: Completing initialization.
[ 7.924076] SELinux: Setting up existing superblocks.
[ 7.924117] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.924159] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 7.924482] SELinux: initialized (dev bdev, type bdev), not configured for labeling
[ 7.924519] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 7.924575] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.924688] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 7.951924] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 7.951971] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 7.952003] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[ 7.952039] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 7.952091] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 7.952139] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 7.952315] SELinux: initialized (dev configfs, type configfs), not configured for labeling
[ 7.952347] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.952425] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 8.125244] type=1403 audit(1452108542.879:2): policy loaded auid=4294967295 ses=4294967295
[ 8.135659] type=1404 audit(1452108542.889:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 8.695164] init: /init.aosp.rc: 561: ignored duplicate definition of service 'media'
[ 8.695313] init: /init.aosp.rc: 592: ignored duplicate definition of service 'flash_recovery'
[ 8.695443] init: /init.aosp.rc: 613: ignored duplicate definition of service 'keystore'
[ 8.696411] init: /init.em_i8811m.rc: 44: invalid command 'setprop_from_sysfs'
[ 8.696473] init: /init.em_i8811m.rc: 45: invalid command 'setprop_from_sysfs'
[ 8.696527] init: /init.em_i8811m.rc: 46: invalid command 'setprop_from_sysfs'
[ 8.696577] init: /init.em_i8811m.rc: 47: invalid command 'setprop_from_sysfs'
[ 8.699064] init: could not import file 'init.internal_props.rc' from 'init.debug.rc'
[ 8.700535] init: could not import file 'init.gps.rc' from '/init.em_i8811m.rc'
[ 8.704479] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 9.826722] init: /dev/hw_random not found
[ 9.826903] keychord: using input dev Power Button for fevent
[ 9.826938] keychord: using input dev SINO WEALTH USB Composite Device for fevent
[ 9.826989] keychord: using input dev SINO WEALTH USB Composite Device for fevent
[ 9.827038] keychord: using input dev gpio-lesskey for fevent
[ 9.827063] keychord: using input dev dollar_cove_power_button for fevent
[ 9.828911] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 9.829772] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 9.830928] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 9.837548] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 9.838136] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 9.842880] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 9.846260] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 9.864068] had: ******** HAD DRIVER loading.. Ver: 0.01.003
[ 9.867334] [drm] mid_hdmi_audio_register: Scheduling HDMI audio work queue
[ 9.867404] [drm:i915_had_wq] *ERROR* Checking for HDMI connection at boot
[ 9.921863] [TTM] Zone kernel: Available graphics memory: 964110 kiB
[ 9.921891] [TTM] Initializing pool allocator
[ 9.921940] [TTM] Initializing DMA pool allocator
[ 9.922029] [drm] vxd_driver_load 3, i915_dev_priv->regs is 0x2180000.
[ 9.922049] [drm] 0 MSVDX_CORE_REV_OFFSET value is 0xffffffff.
[ 9.922065] [drm] 1 MSVDX_CORE_REV_OFFSET value is 0xffffffff.
[ 9.922285] [TTM] DRM_PSB_MEM_MMU heap: start 0x0
[ 9.922308] [TTM] DRM_PSB_MEM_MMU_TILING heap: start 0x50000000
[ 9.956609] bcm_bt_lpm OBDA8723:00: Error evaluating UART port number
[ 9.956985] ------------[ cut here ]------------
[ 9.957027] WARNING: at ../../../../../../linux/kernel/lib/list_debug.c:45 __list_add_rcu+0xd8/0x220()
[ 9.957051] __list_add_rcu corruption. next->prev should be prev (ffffffff83161250), but was (null). (next=ffff880076956478).
[ 9.957065] Modules linked in: bcm_bt_lpm(+) vxd392 videobuf_vmalloc videobuf_core fps_throttle hdmi_audio
[ 9.957134] CPU: 0 PID: 1 Comm: init Tainted: G W 3.10.62-x86_64_byt #3
[ 9.957150] Hardware name: Woxter WOXTERI ZEN 10/WOXTERI ZEN 10, BIOS 5.6.5 11/12/2015
[ 9.957164] 0000000000000009 ffff8800728d3b00 ffffffff829bceff ffff8800728d3b38
[ 9.957207] ffffffff820ae8a1 ffffffff83161250 ffff880076956478 ffffffffa00111b0
[ 9.957245] 0000000000000001 ffffffffa0011580 ffff8800728d3b98 ffffffff820ae90d
[ 9.957284] Call Trace:
[ 9.957316] [<ffffffff829bceff>] dump_stack+0x19/0x1b
[ 9.957346] [<ffffffff820ae8a1>] warn_slowpath_common+0x61/0x80
[ 9.957373] [<ffffffff820ae90d>] warn_slowpath_fmt+0x4d/0x50
[ 9.957401] [<ffffffff820e613d>] ? get_parent_ip+0xd/0x50
[ 9.957430] [<ffffffff82352d88>] __list_add_rcu+0xd8/0x220
[ 9.957457] [<ffffffff824e4d1d>] wakeup_source_add+0x8d/0xc0
[ 9.957492] [<ffffffffa000f786>] bcm43xx_bluetooth_probe+0x2a6/0x5a0 [bcm_bt_lpm]
[ 9.957520] [<ffffffff824dd88d>] platform_drv_probe+0x3d/0x70
[ 9.957548] [<ffffffff824db022>] ? driver_sysfs_add+0x82/0xb0
[ 9.957576] [<ffffffff824db710>] driver_probe_device+0x90/0x3c0
[ 9.957603] [<ffffffff824dbb13>] __driver_attach+0x93/0xa0
[ 9.957630] [<ffffffff824dba80>] ? __device_attach+0x40/0x40
[ 9.957656] [<ffffffff824d9623>] bus_for_each_dev+0x63/0xa0
[ 9.957683] [<ffffffff824db13e>] driver_attach+0x1e/0x20
[ 9.957709] [<ffffffff824dacd0>] bus_add_driver+0x1e0/0x290
[ 9.957733] [<ffffffffa004b000>] ? 0xffffffffa004afff
[ 9.957760] [<ffffffff824dc181>] driver_register+0x71/0x150
[ 9.957783] [<ffffffffa004b000>] ? 0xffffffffa004afff
[ 9.957809] [<ffffffff824dd696>] platform_driver_register+0x46/0x50
[ 9.957840] [<ffffffffa004b017>] bcm43xx_bluetooth_init+0x17/0x1000 [bcm_bt_lpm]
[ 9.957869] [<ffffffff820002a2>] do_one_initcall+0xd2/0x180
[ 9.957899] [<ffffffff8211a327>] load_module+0x1117/0x19e0
[ 9.957926] [<ffffffff82363390>] ? ddebug_proc_write+0x100/0x100
[ 9.957960] [<ffffffff8211acb7>] SyS_init_module+0xc7/0x110
[ 9.957990] [<ffffffff829d04b9>] ia32_do_call+0x13/0x13
[ 9.958008] ---[ end trace 48c955fa37ad7da9 ]---
[ 9.959717] init: /dev/hw_random not found
[ 9.982446] EXT4-fs (mmcblk0p3): recovery complete
[ 9.982495] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
[ 9.982546] SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr
[ 9.982751] fs_mgr: __mount(source=/dev/block/by-name/factory,target=/factory,type=ext4)=0
[ 10.005614] bio: create slab <bio-1> at 1
[ 10.029527] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 10.029579] SELinux: initialized (dev dm-0, type ext4), uses xattr
[ 10.029724] fs_mgr: __mount(source=/dev/block/dm-0,target=/system,type=ext4)=0
[ 10.031151] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
[ 10.038022] EXT4-fs (mmcblk0p11): recovery complete
[ 10.038074] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 10.038131] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[ 10.038284] fs_mgr: check_fs(): mount(/dev/block/by-name/cache,/cache,ext4)=0
[ 10.038984] ext4-dio-unwrit (161) used greatest stack depth: 6664 bytes left
[ 10.047871] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
[ 10.089160] ueventd (148) used greatest stack depth: 5656 bytes left
[ 10.248796] e2fsck (162) used greatest stack depth: 4392 bytes left
[ 10.249048] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 10.249187] e2fsck: /dev/block/by-name/cache: clean, 22/57344 files, 7443/229376 blocks
[ 10.257172] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
[ 10.257231] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[ 10.257384] fs_mgr: __mount(source=/dev/block/by-name/cache,target=/cache,type=ext4)=0
[ 10.266250] EXT4-fs (mmcblk0p10): recovery complete
[ 10.266301] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
[ 10.266350] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
[ 10.266500] fs_mgr: __mount(source=/dev/block/by-name/config,target=/config,type=ext4)=0
[ 10.267622] EXT4-fs (mmcblk0p13): VFS: Can't find ext4 filesystem
[ 10.268155] fs_mgr: check_fs(): mount(/dev/block/by-name/data,/data,ext4)=-1
[ 10.268235] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/data
[ 10.291275] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 10.291385] e2fsck: ext2fs_open2: Bad magic number in super-block
[ 10.291432] e2fsck: /system/bin/e2fsck: Superblock invalid, trying backup blocks...
[ 10.291472] e2fsck: /system/bin/e2fsck: Bad magic number in super-block while trying to open /dev/block/by-name/data
[ 10.291510] e2fsck:
[ 10.291548] e2fsck: The superblock could not be read or does not describe a correct ext2
[ 10.291587] e2fsck: filesystem. If the device is valid and it really contains an ext2
[ 10.291626] e2fsck: filesystem (and not swap or ufs or something else), then the superblock
[ 10.291664] e2fsck: is corrupt, and you might try running e2fsck with an alternate superblock:
[ 10.291702] e2fsck: e2fsck -b 8193 <device>
[ 10.291738] e2fsck:
[ 10.291784] e2fsck: e2fsck terminated by exit(8)
[ 10.293014] EXT4-fs (mmcblk0p13): VFS: Can't find ext4 filesystem
[ 10.293190] fs_mgr: __mount(source=/dev/block/by-name/data,target=/data,type=ext4)=-1
[ 10.294102] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/by-name/data for mount /data type ext4 )
[ 10.294362] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.294638] fs_mgr: check_fs(): mount(/dev/block/by-name/logs,/logs,ext4)=-1
[ 10.294714] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/logs
[ 10.329322] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 10.329436] e2fsck: /dev/block/by-name/logs: recovering journal
[ 10.329484] e2fsck: /dev/block/by-name/logs: clean, 14/16384 files, 2091/65536 blocks
[ 10.336044] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
[ 10.336100] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
[ 10.336251] fs_mgr: __mount(source=/dev/block/by-name/logs,target=/logs,type=ext4)=0
[ 10.379332] stk831x 3-003d: Sensor get ID error
[ 10.379366] stk831x 3-003d: sensor_init
[ 10.379410] stk831x: probe of 3-003d failed with error -121
[ 10.386945] input: accel_kxcj9 as /devices/platform/80860F41:02/i2c-3/3-000f/input/input9
[ 10.387829] i2c i2c-3: Failed to register i2c client KXCJ9000:00 at 0x0f (-16)
[ 10.387857] Fail to add i2c device3:15
[ 10.387874] Fail to register sensor device
[ 10.388472] BSBG0160:00 3-0068: Sensor get ID error
[ 10.388498] BSBG0160:00 3-0068: sensor_init
[ 10.388542] BSBG0160:00: probe of 3-0068 failed with error -121
[ 10.388672] i2c i2c-3: Failed to register i2c client BSBG0160:00 at 0x68 (-16)
[ 10.388694] Fail to add i2c device3:104
[ 10.388709] Fail to register sensor device
[ 10.477129] lm3554 2-0053: no platform data
[ 10.568803] atomisp-css2400b0_v21 0000:00:03.0: ISP HPLL frequency base = 2000 MHz
[ 10.987162] atomisp-css2400b0_v21 0000:00:03.0: setting latency timer to 64
[ 10.987283] atomisp-css2400b0_v21 0000:00:03.0: irq 106 for MSI/MSI-X
[ 11.068189] ov2685 2-003c: read from offset 0x300a error -121
[ 11.068223] ov2685 2-003c: sensor_id_high = 0x0
[ 11.068244] ov2685 2-003c: ov_detect err s_config.
[ 11.107139] ov2685 2-003c: sensor power-gating failed
[ 11.107174] ov2685 2-003c: fail to init ov sensor!
[ 11.107503] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov2685 detection fail
[ 11.198097] ov2685 2-003c: read from offset 0x300a error -121
[ 11.198131] ov2685 2-003c: sensor_id_high = 0x0
[ 11.198152] ov2685 2-003c: ov_detect err s_config.
[ 11.237174] ov2685 2-003c: sensor power-gating failed
[ 11.237209] ov2685 2-003c: fail to init ov sensor!
[ 11.237634] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov2685f detection fail
[ 11.241515] ov5670 2-003c: @power_up:
[ 11.297149] ov5670 2-003c: camera pdata: port: 1 lanes: 2 order: 00000002
[ 11.298450] ov5670 2-003c: read from offset 0x300b error -121
[ 11.298480] ov5670 2-003c: sensor_id_high = 0x0
[ 11.298501] ov5670 2-003c: ov5670_detect err s_config.
[ 11.309692] ov5670 2-003c: sensor power-gating failed
[ 11.310121] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov5670 detection fail
[ 11.478478] gc0310soc 2-003c: [gcdriver]: i2c read failed
[ 11.478510] gc2155: gc_detect err s_config.
[ 11.557085] gc0310soc 2-003c: sensor power-gating failed
[ 11.557521] atomisp-css2400b0_v21 0000:00:03.0: Subdev gc2155 detection fail
[ 11.628270] gc22351x5 2-003c: write error: wrote 0x80 to offset 0xfe error -5
[ 11.628306] gc22351x5 2-003c: gc2235_init_common:init common error
[ 11.628324] gc2235b: gc2235 power-up err.
[ 11.667044] gc22351x5 2-003c: sensor power-gating failed
[ 11.667113] gc22351x5: probe of 2-003c failed with error -5
[ 11.667502] atomisp-css2400b0_v21 0000:00:03.0: Subdev gc2235b detection fail
[ 11.705634] hm2056 2-0024: camera pdata: port: 1 lanes: 1 order: 00000000
[ 11.706728] hm2056 2-0024: read from offset 0x1 error -121
[ 11.706756] hm2056 2-0024: sensor_id_high = 0x0
[ 11.706776] hm2056 2-0024: hm2056_detect err s_config.
[ 11.715575] hm2056 2-0024: sensor power-gating failed
[ 11.715604] hm2056 2-0024: +++ out free
[ 11.716003] atomisp-css2400b0_v21 0000:00:03.0: Subdev hm2056 detection fail
[ 11.717566] hm2056f power is off.
[ 11.766713] hm2056f power is on.
[ 11.827071] hm2056f 1-0024: camera pdata: port: 0 lanes: 1 order: 00000000
[ 11.828311] hm2056f 1-0024: read from offset 0x1 error -121
[ 11.828342] hm2056f 1-0024: sensor_id_high = 0x0
[ 11.828362] hm2056f 1-0024: hm2056_detect err s_config.
[ 11.837360] hm2056f power is off.
[ 11.837391] hm2056f 1-0024: sensor power-gating failed
[ 11.837413] hm2056f 1-0024: +++ out free
[ 11.837810] atomisp-css2400b0_v21 0000:00:03.0: Subdev hm2056f detection fail
[ 11.839486] gc5004 2-0036: @power_up ++
[ 11.839516] gc5004_power_ctrl,flag:1
[ 11.867127] gc5004_gpio_ctrl,flag:1
[ 11.928327] gc5004 2-0036: write error: wrote 0x80 to offset 0xfe error -5
[ 11.928362] gc5004 2-0036: gc5004_init_common:init common error
[ 11.928379] gc5004: gc5004 power-up err.
[ 11.928399] gc5004 2-0036: @power_down ++
[ 11.928424] gc5004_gpio_ctrl,flag:0
[ 11.928480] gc5004_power_ctrl,flag:0
[ 11.967080] gc5004 2-0036: sensor power-gating failed
[ 11.967149] gc5004: probe of 2-0036 failed with error -5
[ 11.967534] atomisp-css2400b0_v21 0000:00:03.0: Subdev gc5004 detection fail
[ 12.027198] ov5648 2-0036: camera pdata: port: 1 lanes: 2 order: 00000002
[ 12.029995] ov5648 2-0036: sensor ID error
[ 12.030024] ov5648 2-0036: ov5648_detect err s_config.
[ 12.038434] ov5648 2-0036: sensor power-gating failed
[ 12.038848] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov5648 detection fail
[ 12.040534] hm5040_probe
[ 12.040571] power_down
[ 12.040589] hm5040 clock is not set.
[ 12.040608] hm5040_gpio_ctrl: failed to request gpio(pin 126)
[ 12.040626] hm5040_gpio_ctrl: failed to request gpio(pin 126)
[ 12.040647] hm5040 2-001b: gpio failed 2
[ 12.040662] power_up
[ 12.071353] hm5040_gpio_ctrl: failed to request gpio(pin 126)
[ 12.071387] hm5040_gpio_ctrl: failed to request gpio(pin 126)
[ 12.079503] hm5040 2-001b: sensor power-up failed
[ 12.079531] hm5040 2-001b: hm5040 power-up err.
[ 12.079548] power_down
[ 12.079562] hm5040 clock is not set.
[ 12.079580] hm5040_gpio_ctrl: failed to request gpio(pin 126)
[ 12.079598] hm5040_gpio_ctrl: failed to request gpio(pin 126)
[ 12.079618] hm5040 2-001b: gpio failed 2
[ 12.079637] hm5040 2-001b: sensor power-gating failed
[ 12.079685] hm5040: probe of 2-001b failed with error -16
[ 12.080058] atomisp-css2400b0_v21 0000:00:03.0: Subdev hm5040 detection fail
[ 12.081866] ++++ov2680_probe++++
[ 12.081901] ov2680 2-0036: ++++ov2680_probe++++
[ 12.157105] ov2680 2-0036: camera pdata: port: 1 lanes: 1 order: 00000002
[ 12.169374] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov2680b successfully register
[ 12.170633] @gc0339_s_power: enable:0
[ 12.207209] @gc0339_s_power: enable:1
[ 12.207238] power_up++
[ 12.309231] gc0339 2-0046: write error: wrote 0x10 to offset 0xfc error -121
[ 12.338933] gc0339 2-0046: write error: wrote 0x10 to offset 0xfc error -121
[ 12.368929] gc0339 2-0046: write error: wrote 0x10 to offset 0xfc error -121
[ 12.398774] gc0339 2-0046: write error: wrote 0x10 to offset 0xfc error -121
[ 12.428779] gc0339 2-0046: write error: wrote 0x10 to offset 0xfc error -121
[ 12.458779] gc0339 2-0046: write error: wrote 0x10 to offset 0xfc error -121
[ 12.488781] gc0339 2-0046: write error: wrote 0x10 to offset 0xfc error -121
[ 12.488816] gc0339 2-0046: gc0339_init_common:init common error
[ 12.488835] gc0339: gc0339 power-up err at gc0339_s_power: enable:0
[ 12.527058] gc0339 2-0046: sensor power-gating failed
[ 12.527128] gc0339: probe of 2-0046 failed with error -121
[ 12.527419] atomisp-css2400b0_v21 0000:00:03.0: Subdev gc0339 detection fail
[ 12.528273] i2c i2c-1: Failed to register i2c client ov2722 at 0x36 (-16)
[ 12.528306] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov2722 detection fail
[ 12.598343] ov7736 2-003c: read from offset 0x300a error -121
[ 12.598378] ov7736 2-003c: sensor_id_high = 0x70ccc028
[ 12.598398] ov7736 2-003c: ov7736_detect err s_config.
[ 12.637073] ov7736 2-003c: sensor power-gating failed
[ 12.637513] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov7736 detection fail
[ 12.638647] ++++ov2680_probe++++
[ 12.638679] ov2680 2-0010: ++++ov2680_probe++++
[ 12.638758] ov2680f_power_ctrl:++++ov2680f_power_ctrl off
[ 12.638777] ov2680f_power_ctrl:++++ov2680f_power_ctrl on
[ 12.697201] ov2680 2-0010: camera pdata: port: 0 lanes: 1 order: 00000002
[ 12.698410] ov2680 2-0010: read from offset 0x300a error -121
[ 12.698440] ov2680 2-0010: sensor_id_high = 0x0
[ 12.698461] ov2680 2-0010: ov2680_detect err s_config.
[ 12.698527] ov2680f_power_ctrl:++++ov2680f_power_ctrl off
[ 12.707178] ov2680 2-0010: sensor power-gating failed
[ 12.707590] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov2680f detection fail
[ 12.708708] ++++ov2680_probe++++
[ 12.708740] ov2680 1-0010: ++++ov2680_probe++++
[ 12.708814] ov2680f_power_ctrl:++++ov2680f_power_ctrl off
[ 12.708833] ov2680f_power_ctrl:++++ov2680f_power_ctrl on
[ 12.767165] ov2680 1-0010: camera pdata: port: 0 lanes: 1 order: 00000002
[ 12.771249] ov2680f_power_ctrl:++++ov2680f_power_ctrl off
[ 12.779405] atomisp-css2400b0_v21 0000:00:03.0: Subdev ov2680f successfully register
[ 12.878469] gc2235f 2-003c: write error: wrote 0x80 to offset 0xfe error -5
[ 12.878504] gc2235f 2-003c: gc2235f_init_common:init common error
[ 12.878522] gc2235f: gc2235f power-up err.
[ 12.917054] gc2235f 2-003c: sensor power-gating failed
[ 12.917124] gc2235f: probe of 2-003c failed with error -5
[ 12.917514] atomisp-css2400b0_v21 0000:00:03.0: Subdev gc2235f detection fail
[ 13.058302] gc0310soc 1-0049: [gcdriver]: i2c read failed
[ 13.058334] gc0310soc: gc_detect err s_config.
[ 13.097086] gc0310soc 1-0049: sensor power-gating failed
[ 13.097526] atomisp-css2400b0_v21 0000:00:03.0: Subdev gc0310soc detection fail
[ 13.238330] gc0310soc 2-0050: [gcdriver]: i2c read failed
[ 13.238362] gc0310soc: gc_detect err s_config.
[ 13.277082] gc0310soc 2-0050: sensor power-gating failed
[ 13.277522] atomisp-css2400b0_v21 0000:00:03.0: Subdev gc0310soc detection fail
[ 13.279295] ###fun:bf3905_probe, line:1312.
[ 13.279333] ###fun:bf3905_s_config, line:1036.
[ 13.279354] ###fun:power_down, line:713.
[ 13.279370] fun:bf3905_flisclk_ctrl, line:139.
[ 13.279397] fun:bf3905_gpio_ctrl, line:60.
[ 13.307129] ###fun:power_up, line:665.
[ 13.343497] fun:bf3905_gpio_ctrl, line:60.
[ 13.397078] fun:bf3905_flisclk_ctrl, line:134.
[ 13.397120] fun:bf3905_flisclk_ctrl, line:139.
[ 13.427065] ***power up return 0!
[ 13.427113] bf3905 2-006f: camera pdata: port: 0 lanes: 1 order: 00000002
[ 13.427138] ###fun:bf3905_detect, line:937.
[ 13.428374] bf3905 2-006f: read from offset 0xfc error -121
[ 13.428405] bf3905 2-006f: sensor_id_high = 0x0
[ 13.428426] bf3905 2-006f: bf3905_detect err s_config.
[ 13.428446] ###fun:power_down, line:713.
[ 13.428463] fun:bf3905_flisclk_ctrl, line:139.
[ 13.428488] fun:bf3905_gpio_ctrl, line:60.
[ 13.465566] bf3905 2-006f: sensor power-gating failed
[ 13.465989] atomisp-css2400b0_v21 0000:00:03.0: Subdev bf3905 detection fail
[ 13.687091] bf3a20 2-006f: camera pdata: port: 0 lanes: 1 order: 00000003
[ 13.688340] bf3a20 2-006f: read from offset 0xfc error -121
[ 13.689329] bf3a20 2-006f: read from offset 0xfc error -121
[ 13.690361] bf3a20 2-006f: read from offset 0xfc error -121
[ 13.691220] bf3a20 2-006f: read from offset 0xfc error -121
[ 13.692057] bf3a20 2-006f: read from offset 0xfc error -121
[ 13.692904] bf3a20 2-006f: read from offset 0xfc error -121
[ 13.693930] bf3a20 2-006f: read from offset 0xfc error -121
[ 13.694791] bf3a20 2-006f: read from offset 0xfc error -121
[ 13.695640] bf3a20 2-006f: read from offset 0xfc error -121
[ 13.696472] bf3a20 2-006f: read from offset 0xfc error -121
[ 13.697509] bf3a20 2-006f: read from offset 0xfd error -121
[ 13.698357] bf3a20 2-006f: read from offset 0xfd error -121
[ 13.699205] bf3a20 2-006f: read from offset 0xfd error -121
[ 13.700223] bf3a20 2-006f: read from offset 0xfd error -121
[ 13.701079] bf3a20 2-006f: read from offset 0xfd error -121
[ 13.701915] bf3a20 2-006f: read from offset 0xfd error -121
[ 13.702970] bf3a20 2-006f: read from offset 0xfd error -121
[ 13.703832] bf3a20 2-006f: read from offset 0xfd error -121
[ 13.704696] bf3a20 2-006f: read from offset 0xfd error -121
[ 13.705543] bf3a20 2-006f: read from offset 0xfd error -121
[ 13.705568] bf3a20 2-006f: sensor ID error
[ 13.705588] bf3a20 2-006f: bf3a20_detect err in s_config.
[ 13.767092] bf3a20 2-006f: sensor power-gating failed
[ 13.767529] atomisp-css2400b0_v21 0000:00:03.0: Subdev bf3a20 detection fail
[ 13.780203] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
[ 13.973633] type=1400 audit(1452108548.729:4): avc: denied { write } for pid=224 comm="fg_conf" name="intel_fg" dev="tmpfs" ino=10931 scontext=u:r:fg_conf:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[ 14.045065] Adding 409596k swap on /dev/block/zram0. Priority:-1 extents:1 across:409596k SS
[ 14.048008] init: cannot find '/system/bin/preinit.sensor.sh', disabling 'preinit_sensor'
[ 18.352202] binder: 227:227 transaction failed 29189, size 0-0
[ 18.355119] init: cannot find '/system/bin/ct_monitor', disabling 'ct_monitor'
[ 18.359149] iTCO_wdt: iTCO_wdt_keepalive
[ 18.359201] iTCO_wdt: iTCO_wdt_keepalive
[ 18.413463] logd.auditd: start
[ 18.594011] RTL871X: module init start
[ 18.594046] RTL871X: rtl8723bs v4.3.6.2_12080.20141030_BTCOEX20140702-5140
[ 18.594065] RTL871X: build time: Nov 19 2015 17:00:11
[ 18.594080] RTL871X: rtl8723bs BT-Coex version = BTCOEX20140702-5140
[ 19.141517]
[ 19.141547] 29 81 03 7C 51 08 28 00 62 07 0D 45 10 02 00 00
[ 19.141677] 2C 2D 2E 2E 2E 2E 2E 2F 30 30 30 E0 FF FF FF FF
[ 19.141800] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.141922] FF FF FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D
[ 19.142094] 2D 2D 2D 2D 2D E0 FF FF FF FF FF FF FF FF FF FF
[ 19.142218] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.142341] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.142464] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.142587] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.142709] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.142832] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.142955] FF FF FF FF FF FF FF FF 20 23 21 00 00 00 FF FF
[ 19.143078] FF 29 20 11 00 00 00 FF 00 FF 12 FF FF FF FF FF
[ 19.143201] 3E 10 01 02 23 00 00 FF 20 04 4C 02 23 B7 21 02
[ 19.143324] 0C 00 22 04 00 08 00 32 FF 21 02 0C 00 22 2A 01
[ 19.143447] 01 00 00 00 00 00 00 00 00 00 00 00 02 00 FF FF
[ 19.143569] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.143691] 00 EB 00 6E 01 00 00 00 00 FF 7C C7 09 60 36 29
[ 19.143814] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.143937] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.144060] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.144183] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.144306] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.144428] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.144551] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.144674] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.144797] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.144920] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.145042] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.145165] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.145288] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.145411] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 19.163212] RTL871X: rtw_ndev_init(wlan0)
[ 19.169963] RTL871X: rtw_ndev_init(p2p0)
[ 19.177132] RTL871X: module init ret=0
[ 20.399879] type=1400 audit(1452108555.159:5): avc: denied { read } for pid=271 comm="fg_conf" name="intel_fg" dev="tmpfs" ino=10931 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[ 20.408358] healthd: battery l=18 v=3711 t=23.0 h=2 st=3 c=-1052 chg=
[ 22.049972] bio: create slab <bio-2> at 2
[ 23.262860] EXT4-fs (dm-1): Ignoring removed nomblk_io_submit option
[ 23.482510] EXT4-fs (dm-1): recovery complete
[ 23.484208] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 23.484262] SELinux: initialized (dev dm-1, type ext4), uses xattr
[ 23.484702] fs_mgr: check_fs(): mount(/dev/block/dm-1,/data,ext4)=0
[ 23.493375] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-1
[ 23.534145] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 23.534314] e2fsck: /dev/block/dm-1: clean, 737/260608 files, 50396/1041408 blocks
[ 23.545154] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard,barrier=1,data=ordered,noauto_da_alloc
[ 23.545211] SELinux: initialized (dev dm-1, type ext4), uses xattr
[ 23.545378] fs_mgr: __mount(source=/dev/block/dm-1,target=/data,type=ext4)=0
[ 23.678580] type=1400 audit(1452108558.439:6): avc: denied { write } for pid=296 comm="fg_conf" name="intel_fg" dev="tmpfs" ino=10931 scontext=u:r:fg_conf:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[ 23.692834] zram: Cannot change disksize for initialized device
[ 23.708705] fs_mgr: swapon failed for /dev/block/zram0
[ 23.711177] init: cannot find '/system/bin/preinit.sensor.sh', disabling 'preinit_sensor'
[ 28.226169] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[ 28.233164] init: cannot find '/system/bin/rfid_monzaxd', disabling 'rfid_monzaxd'
[ 28.320865] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 28.356176] type=1400 audit(1452108563.109:7): avc: denied { setattr } for pid=314 comm="chmod" name="004" dev="tmpfs" ino=10802 scontext=u:r:usb3gmonitor:s0 tcontext=u:object_r:usb_device:s0 tclass=chr_file permissive=1
[ 28.359505] iTCO_wdt: iTCO_wdt_keepalive
[ 28.373918] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
[ 28.376757] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
[ 28.398152] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
[ 28.398428] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
[ 28.422338] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
[ 28.422596] atomisp-css2400b0_v21 0000:00:03.0: DFS target frequency=200.
[ 28.434087] warning: `securityfileser' uses 32-bit capabilities (legacy support in use)
[ 28.455029] init: untracked pid 320 exited with status 1
[ 31.156179] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 38.360050] iTCO_wdt: iTCO_wdt_keepalive
[ 40.939254] snd_intel_sst: runtime_resume called
[ 40.998030] snd_intel_sst: GOT table entry invalid
[ 41.005007] snd_intel_sst: FW Version 02.08.0a.09
[ 41.005039] snd_intel_sst: Build date Aug 11 2014 Time 10:58:10
[ 41.005366] snd_intel_sst: runtime_idle called
[ 41.005653] snd_intel_sst: runtime_idle called
[ 41.006002] snd_intel_sst: runtime_idle called
[ 41.006333] snd_intel_sst: runtime_idle called
[ 41.030577] snd_intel_sst: runtime_idle called
[ 41.030767] snd_intel_sst: runtime_idle called
[ 41.067886] snd_intel_sst: runtime_idle called
[ 41.068353] snd_intel_sst: runtime_idle called
[ 41.068823] snd_intel_sst: runtime_idle called
[ 41.069180] snd_intel_sst: runtime_idle called
[ 41.069444] snd_intel_sst: runtime_idle called
[ 41.069952] snd_intel_sst: runtime_idle called
[ 41.070323] snd_intel_sst: runtime_idle called
[ 41.070592] snd_intel_sst: runtime_idle called
[ 41.071088] snd_intel_sst: runtime_idle called
[ 41.071456] snd_intel_sst: runtime_idle called
[ 41.071708] snd_intel_sst: runtime_idle called
[ 41.071960] snd_intel_sst: runtime_idle called
[ 41.072227] snd_intel_sst: runtime_idle called
[ 41.072638] snd_intel_sst: runtime_idle called
[ 41.073008] snd_intel_sst: runtime_idle called
[ 41.073273] snd_intel_sst: runtime_idle called
[ 41.073684] snd_intel_sst: runtime_idle called
[ 41.074054] snd_intel_sst: runtime_idle called
[ 41.074309] snd_intel_sst: runtime_idle called
[ 41.074580] snd_intel_sst: runtime_idle called
[ 41.074846] snd_intel_sst: runtime_idle called
[ 41.075107] snd_intel_sst: runtime_idle called
[ 41.076664] snd_intel_sst: runtime_idle called
[ 41.077236] snd_intel_sst: runtime_idle called
[ 41.077798] snd_intel_sst: runtime_idle called
[ 41.078362] snd_intel_sst: runtime_idle called
[ 41.078920] snd_intel_sst: runtime_idle called
[ 41.079476] snd_intel_sst: runtime_idle called
[ 41.080029] snd_intel_sst: runtime_idle called
[ 41.080585] snd_intel_sst: runtime_idle called
[ 41.081149] snd_intel_sst: runtime_idle called
[ 41.081712] snd_intel_sst: runtime_idle called
[ 41.082286] snd_intel_sst: runtime_idle called
[ 41.082861] snd_intel_sst: runtime_idle called
[ 41.083113] snd_intel_sst: runtime_idle called
[ 41.083374] snd_intel_sst: runtime_idle called
[ 41.083785] snd_intel_sst: runtime_idle called
[ 41.084145] snd_intel_sst: runtime_idle called
[ 41.084400] snd_intel_sst: runtime_idle called
[ 41.084664] snd_intel_sst: runtime_idle called
[ 41.084951] snd_intel_sst: runtime_idle called
[ 41.085216] snd_intel_sst: runtime_idle called
[ 41.085471] snd_intel_sst: runtime_idle called
[ 41.085735] snd_intel_sst: runtime_idle called
[ 41.086140] snd_intel_sst: runtime_idle called
[ 41.086499] snd_intel_sst: runtime_idle called
[ 41.086974] snd_intel_sst: runtime_idle called
[ 41.087343] snd_intel_sst: runtime_idle called
[ 41.087704] snd_intel_sst: runtime_idle called
[ 41.087965] snd_intel_sst: runtime_idle called
[ 41.192755] snd_intel_sst: runtime_idle called
[ 41.193028] snd_intel_sst: runtime_idle called
[ 43.186780] snd_intel_sst: runtime_suspend called
More information about the Intel-gfx
mailing list