[Intel-gfx] [PATCH 7/8] drm/i915: Enhance cdclk sanitization

[Matt Roper]

When reading out the BIOS-programmed cdclk state, let's make sure that
the cdclk value is on the valid list for the platform, ensure that the
VCO matches the cdclk, and ensure that the CD2X divider was set
properly.

Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
 drivers/gpu/drm/i915/display/intel_cdclk.c | 34 ++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index a6696697a09f..356495591cf9 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -1607,6 +1607,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
 {
 	u32 cdctl, expected;
+	int cdclk, vco;
 
 	intel_update_cdclk(dev_priv);
 	intel_dump_cdclk_state(&dev_priv->cdclk.hw, "Current CDCLK");
@@ -1629,8 +1630,37 @@ static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
 	 */
 	cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE;
 
-	expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) |
-		skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
+	/* Make sure this is a legal cdclk value for the platform */
+	cdclk = calc_cdclk(dev_priv, dev_priv->cdclk.hw.cdclk);
+	if (cdclk != dev_priv->cdclk.hw.cdclk)
+		goto sanitize;
+
+	/* Make sure the VCO is correct for the cdclk */
+	vco = calc_cdclk_pll_vco(dev_priv, cdclk);
+	if (vco != dev_priv->cdclk.hw.vco)
+		goto sanitize;
+
+	expected = skl_cdclk_decimal(cdclk);
+
+	/* Figure out what CD2X divider we should be using for this cdclk */
+	switch (DIV_ROUND_CLOSEST(dev_priv->cdclk.hw.vco,
+				  dev_priv->cdclk.hw.cdclk)) {
+	case 2:
+		expected |= BXT_CDCLK_CD2X_DIV_SEL_1;
+		break;
+	case 3:
+		expected |= BXT_CDCLK_CD2X_DIV_SEL_1_5;
+		break;
+	case 4:
+		expected |= BXT_CDCLK_CD2X_DIV_SEL_2;
+		break;
+	case 8:
+		expected |= BXT_CDCLK_CD2X_DIV_SEL_4;
+		break;
+	default:
+		goto sanitize;
+	}
+
 	/*
 	 * Disable SSA Precharge when CD clock frequency < 500 MHz,
 	 * enable otherwise.
-- 
2.20.1