[Intel-gfx] [PATCH v5 05/11] drm/i915/dsb: Check DSB engine status.

Sharma, Shashank shashank.sharma at intel.com
Mon Sep 9 13:13:06 UTC 2019


On 9/7/2019 4:37 PM, Animesh Manna wrote:
> As per bspec check for DSB status before programming any
> of its register. Inline function added to check the dsb status.
>
> Cc: Michel Thierry <michel.thierry at intel.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Shashank Sharma <shashank.sharma at intel.com>
> Signed-off-by: Animesh Manna <animesh.manna at intel.com>
> ---
>   drivers/gpu/drm/i915/display/intel_dsb.c | 9 +++++++++
>   drivers/gpu/drm/i915/i915_reg.h          | 7 +++++++
>   2 files changed, 16 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dsb.c b/drivers/gpu/drm/i915/display/intel_dsb.c
> index 0f55ed683d41..2c8415518c65 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsb.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsb.c
> @@ -17,6 +17,15 @@
>   #define DSB_BYTE_EN_SHIFT		20
>   #define DSB_REG_VALUE_MASK		0xfffff
>   
> +static inline bool is_dsb_busy(struct intel_dsb *dsb)
> +{
> +	struct intel_crtc *crtc = container_of(dsb, typeof(*crtc), dsb);
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +	enum pipe pipe = crtc->pipe;
> +
> +	return DSB_STATUS & I915_READ(DSB_CTRL(pipe, dsb->id));
> +}
> +
>   struct intel_dsb *
>   intel_dsb_get(struct intel_crtc *crtc)
>   {
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 006cffd56be2..a3099f712ae6 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -11676,4 +11676,11 @@ enum skl_power_gate {
>   #define PORT_TX_DFLEXDPCSSS(fia)		_MMIO_FIA((fia), 0x00894)
>   #define   DP_PHY_MODE_STATUS_NOT_SAFE(tc_port)		(1 << (tc_port))
>   
> +/* This register controls the Display State Buffer (DSB) engines. */
> +#define _DSBSL_INSTANCE_BASE		0x70B00
> +#define DSBSL_INSTANCE(pipe, id)	(_DSBSL_INSTANCE_BASE + \
> +					 (pipe) * 0x1000 + (id) * 100)

Why is pipe in () ?

- Shashank

> +#define DSB_CTRL(pipe, id)		_MMIO(DSBSL_INSTANCE(pipe, id) + 0x8)
> +#define   DSB_STATUS			(1 << 0)
> +
>   #endif /* _I915_REG_H_ */


More information about the Intel-gfx mailing list