[Intel-gfx] [PATCH v3 3/6] drm/i915/display/icl: HW state readout for transcoder port sync config
Manasi Navare
manasi.d.navare at intel.com
Tue Sep 24 17:59:57 UTC 2019
On Tue, Sep 24, 2019 at 05:38:00PM +0200, Maarten Lankhorst wrote:
> Op 22-09-2019 om 19:08 schreef Manasi Navare:
> > After the state is committed, we readout the HW registers and compare
> > the HW state with the SW state that we just committed.
> > For Transcdoer port sync, we add master_transcoder and the
> > salves bitmask to the crtc_state, hence we need to read those during
> > the HW state readout to avoid pipe state mismatch.
> >
> > v4:
> > * Get power domains in master loop for get_config (Ville)
> > v3:
> > * Add TRANSCODER_D (Maarten)
> > * v3 Reviewed-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > v2:
> > * Add Transcoder_D and MISSING_CASE (Maarten)
> >
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > Cc: Matt Roper <matthew.d.roper at intel.com>
> > Cc: Jani Nikula <jani.nikula at intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 69 ++++++++++++++++++++
> > 1 file changed, 69 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index 1ae5eafe2892..711987eb4e9e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -10470,6 +10470,72 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
> > }
> > }
> >
> > +static enum transcoder transcoder_master(struct drm_i915_private *dev_priv,
> > + enum transcoder cpu_transcoder)
> > +{
> > + u32 trans_port_sync, master_select;
> > +
> > + trans_port_sync = I915_READ(TRANS_DDI_FUNC_CTL2(cpu_transcoder));
> > +
> > + if ((trans_port_sync & PORT_SYNC_MODE_ENABLE) == 0)
> > + return INVALID_TRANSCODER;
> > +
> > + master_select = trans_port_sync &
> > + PORT_SYNC_MODE_MASTER_SELECT_MASK;
> > + switch (master_select) {
> > + case 1:
> > + return TRANSCODER_A;
> > + case 2:
> > + return TRANSCODER_B;
> > + case 3:
> > + return TRANSCODER_C;
> > + case 4:
> > + return TRANSCODER_D;
> > + default:
> > + MISSING_CASE(master_select);
> > + }
> > +
> > + return INVALID_TRANSCODER;
> Could move this return up to default. :)
Yes will do this
> > +}
> > +
> > +static void icelake_get_trans_port_sync_config(struct intel_crtc *crtc,
> > + struct intel_crtc_state *pipe_config)
> > +{
> > + struct drm_device *dev = crtc->base.dev;
> > + struct drm_i915_private *dev_priv = to_i915(dev);
> > + u32 transcoders;
> > + enum transcoder cpu_transcoder;
> > +
> > + pipe_config->master_transcoder = transcoder_master(dev_priv,
> > + pipe_config->cpu_transcoder);
> > + if (pipe_config->master_transcoder != INVALID_TRANSCODER) {
> > + pipe_config->sync_mode_slaves_mask = 0;
> > + return;
> > + }
> > +
>
> It could still be useful to go through the loop below anyway, in case we messed up. We are reading out from hw after all.
>
The loop below will be called always in case of the HW state readout for master, in case of the slave it will execute
the firs part, get the master transcoder and return, why do we need to call the loop below for slave? Why cant we just return here
as in the code?
> And then also add this as a PIPE_CONF_CHECK_X check to pipe_config_compare().
>
This is already added in pipe_config_compare() in the patch that adds these two master_trans and slave_bitmask to the crtc state
Manasi
> With that fixed and CI happy,
>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>
> > + transcoders = BIT(TRANSCODER_A) |
> > + BIT(TRANSCODER_B) |
> > + BIT(TRANSCODER_C) |
> > + BIT(TRANSCODER_D);
> > + for_each_cpu_transcoder_masked(dev_priv, cpu_transcoder, transcoders) {
> > + enum intel_display_power_domain power_domain;
> > + intel_wakeref_t trans_wakeref;
> > +
> > + power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
> > + trans_wakeref = intel_display_power_get_if_enabled(dev_priv,
> > + power_domain);
> > +
> > + if (!trans_wakeref)
> > + continue;
> > +
> > + if (transcoder_master(dev_priv, cpu_transcoder) ==
> > + pipe_config->cpu_transcoder)
> > + pipe_config->sync_mode_slaves_mask |= BIT(cpu_transcoder);
> > +
> > + intel_display_power_put(dev_priv, power_domain, trans_wakeref);
> > + }
> > +}
> > +
> > static bool haswell_get_pipe_config(struct intel_crtc *crtc,
> > struct intel_crtc_state *pipe_config)
> > {
> > @@ -10566,6 +10632,9 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
> > pipe_config->pixel_multiplier = 1;
> > }
> >
> > + if (INTEL_GEN(dev_priv) >= 11)
> > + icelake_get_trans_port_sync_config(crtc, pipe_config);
> > +
> > out:
> > for_each_power_domain(power_domain, power_domain_mask)
> > intel_display_power_put(dev_priv,
>
>
More information about the Intel-gfx
mailing list