[Libdlo] MiMo UM-740 Xorg problem

[Francesco Andrisani]

Hi,
this is m first mail then....hello all!
Today i've received an MiMo UM-740 USB monitor, and i've connected it to 
my sheevaplug (ARM based) with a custom linux kernel 2.6.31.1 with I2C 
touchscreen support . I've installed it and work fine. When i plug the 
MiMo monitor i see on screen:

usb 1-1.3: new high speed USB device using orion-ehci and address 15
usb 1-1.3: configuration #1 chosen from 1 choice
hub 1-1.3:1.0: USB hub found
hub 1-1.3:1.0: 4 ports detected
usb 1-1.3.1: new high speed USB device using orion-ehci and address 16
usb 1-1.3.1: configuration #1 chosen from 1 choice
uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:c339)
input: Venus USB2.0 Camera as 
/devices/platform/orion-ehci.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input6
usb 1-1.3.3: new full speed USB device using orion-ehci and address 17
usb 1-1.3.3: configuration #1 chosen from 1 choice
input: e2i Technology, Inc. USB Touchpanel as 
/devices/platform/orion-ehci.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/input/input7
usb 1-1.3.4: new high speed USB device using orion-ehci and address 18
usb 1-1.3.4: configuration #1 chosen from 1 choice
DisplayLink device attached
ret control msg 0: 4 0501f0
EDID XRES 0 YRES 0
INIT VIDEO 0 800 480
INIT VIDEO 1 1024 768
INIT VIDEO 2 1280 1024
ret control msg 1 (STD_CHANNEL): 16
ret bulk 2: 156 156
ret bulk 3: 0
found valid mode...0
screen base allocated !!!
colormap allocated
generic-usb 0003:17E9:401A.0004: hiddev96: USB HID v1.10 Device 
[DisplayLink nanovision MiMo] on usb-orion-ehci.0-1.3.4/input1

I've install gdm + xorg + gnome, bt when i launch gdm i see a blank 
screen with some blinks. Below my xorg.conf:

Section "Files"
ModulePath "/usr/lib/xorg/modules"
ModulePath "/usr/local/lib/xorg/modules"
EndSection

Section "Device"
Identifier "dl0"
driver "displaylink"
Option "fbdev" "/dev/fb0"
EndSection

Section "Monitor"
Identifier "monitor0"
EndSection

Section "Screen"
Identifier "screen0"
Device "dl0"
Monitor "monitor0"
EndSection

Section "InputDevice"
Identifier "dummy"
Driver "void"
Option "Device" "/dev/input/mice"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "screen0"
InputDevice "touchscreen" "CorePointer"
InputDevice "dummy"
EndSection

Section "InputDevice"
Identifier "touchscreen"
Driver "evtouch"
Option "Device" "/dev/input/event0"
Option "DeviceName" "touchscreen"
Option "MinX" "619"
Option "MinY" "957"
Option "MaxX" "32116"
Option "MaxY" "31299"
Option "ReportingMode" "Raw"
Option "Emulate3Buttons" "false"
# Option "Emulate3Timeout" "50"
Option "SendCoreEvents" "On"
Option "SwapY" "1"
EndSection

I've installed Roberto Florio DisplayLink drivers correctly. But i don't 
know where are my errors.
Can some one help me?

Best Regards

-- 
____________________________________________________
*Francesco Andrisani*
Linux Embedded/Security Specialist
mailto: francesco.andrisani at acotel.com
*Acotel Group Spa*
http://www.acotel.com
Via della Valle dei Fontanili, 29
00168 Roma
Tel +390661141000
Fax +39066149936
____________________________________________________

Le informazioni contenute nella comunicazione che precede possono essere 
riservate e sono, comunque, destinate esclusivamente alla persona o 
all’ente sopraindicati. La diffusione, distribuzione e/o copiatura non 
autorizzata del documento trasmesso da parte di qualsiasi soggetto è 
proibita. La sicurezza e la correttezza dei messaggi di posta 
elettronica non possono essere garantite. Se avete ricevuto questo 
messaggio per errore, Vi preghiamo di contattarci immediatamente. Grazie.

This message is for the named person's use only. It may contain 
confidential, proprietary or legally privileged information. No 
confidentiality or privilege is waived or lost by any transmission. If 
you receive this message in error, please immediately delete it and all 
copies of it from your system, destroy any hard copies of it and notify 
the sender. You must not, directly or indirectly, use, disclose, 
distribute, print, or copy any part of this message if you are not the 
intended recipient. Thanks