Any issues with UML290 latest firmware/.. ?

[Gopakumar Choorakkot Edakkunni]

Hi Markus, my apologies on this one - I think the modem has just gone
kaput. I tried the modem from my mac laptop, I tried it from someone elses
windows laptop, it just doesnt work anywhere ! It used to work fine from
all these laptops too, so I think the modem is just broken, I will rest its
case here. Thanks again for your time!

Rgds,
Gopa.

On Mon, Sep 14, 2015 at 11:18 AM, Markus Gothe <nietzsche at lysator.liu.se>
wrote:

> Try using ' --device- open-net="net-802-3|net-no-qos-header”'
>
> //M
> On 14 Sep 2015, at 20:16 , Gopakumar Choorakkot Edakkunni <
> gopakumar.c.e at gmail.com> wrote:
>
> Hi Markus,
>
> Thanks for the quick response. I tried it just now, looks like thats
> failing (previously when the 290 was working, I did not have to do this
> switch).
>
> root:~# qmicli -d /dev/cdc-wdm0  --wda-get-data-format
> error: couldn't create client for the 'wda' service: QMI protocol error
> (31): 'InvalidServiceType'
> root:~# qmicli -d /dev/cdc-wdm0  --wda-set-data-format=802-3
> error: couldn't create client for the 'wda' service: QMI protocol error
> (31): 'InvalidServiceType'
> root:~#
>
> Rgds,
> Gopa.
>
> On Mon, Sep 14, 2015 at 11:07 AM, Markus Gothe <nietzsche at lysator.liu.se>
> wrote:
>
>> Did you switch of the raw-ip mode that it defaults to?
>>
>> //M
>> On 14 Sep 2015, at 20:05 , Gopakumar Choorakkot Edakkunni <
>> gopakumar.c.e at gmail.com> wrote:
>>
>> Hi all,
>>
>> I had UML290 working perfectly fine a couple of months back in my openwrt
>> box, I dont recollect its firmware version/details though. Now I purchased
>> a new UML290 and that doesnt work ! wwan0 interface is created, but it
>> doesnt respond to dhcp requests, no IP address is allocated.
>>
>> The sequence to get this modem working was very straightforward - I used
>> to do a --nat-get-home-network and that gives me the APN, and then I would
>> do a --wds-start-network=<apn> .. Now the nas-get-home-network fails
>> (attached some logs), even if I go ahead and do a
>> --wds-start-network=vzwinternet, it results in an error.  Any clues that I
>> can look for ? Thanks for you time!!
>>
>> Rgds,
>> Gopa.
>>
>>
>> <lsusb.290><ifconfig.290><nas_get_home.290><wds_start_network.290>
>> _______________________________________________
>> libqmi-devel mailing list
>> libqmi-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>
>>
>> //Markus - The panama-hat hacker
>>
>>
>
> //Markus - The panama-hat hacker
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20150914/8b8adeed/attachment.html>