MC7430 modem issue
dailijin
dailijin126 at 126.com
Wed Apr 6 08:57:12 UTC 2016
Hi Bjorn,
Thanks very much for your help.
Now I decide to use another dhcp client to solve this issue.
As for the ISC mailing lists, could you provide the link?
Thanks in advance.
--
Best Regards,
Dai,Lijin
在 2016-04-06 14:12:30,"Bjørn Mork" <bjorn at mork.no> 写道:
>No. dhclient checks that the interface type is ethernet and refuse to
>run on anything else. This is not likely to ever change. Patches
>fixing the issue for DHCPv6 over PPP (where it is a major problem) have
>been floating around on the ISC mailing lists for a decade, and are
>still not applied.
>
>Use another DHCP client or use static IP config.
>
>
>Bjørn
>
>dailijin <dailijin126 at 126.com> writes:
>
>> Hi Bjorn,
>>
>>
>> if I use 1.14, could I directly make it work via dhclient? is there any other setting to do?
>>
>>
>>
>>
>> Thanks
>>
>>
>>
>>
>>
>> --
>>
>> Best Regards,
>> Dai,Lijin
>>
>>
>>
>> 在 2016-04-06 01:07:00,"Bjørn Mork" <bjorn at mork.no> 写道:
>>>Upgrade. You'll want the UIM operations in 1.14 anyway for the MC7430.
>>>
>>>
>>>Bjørn
>>>
>>>Dan Williams <dcbw at redhat.com> writes:
>>>
>>>> libqmi 1.14 and later can report the IP settings. I also just cherry-
>>>> picked the patches to 1.12, but they aren't in a released 1.12 update
>>>> yet.
>>>>
>>>> Dan
>>>>
>>>> On Tue, 2016-04-05 at 15:02 +0800, dailijin wrote:
>>>>> Hi All,<br/><br/>Sorry to respond email so late.<br/><br/>I can
>>>>> manually make MC7430 work via busybox dhcp. but it is best if
>>>>> directly use dhclient to make it work. Dose someone know
>>>>> this.<br/><br/><<<< if you want to try dhcp. Or just use
>>>>> static address config with input from QMI.<br/>I am using libqmi with
>>>>> version 1.10.2, seems to not support static address config, which
>>>>> version should I use? could you give me more steps. <br/><br/>Thanks
>>>>> At 2016-01-03 05:50:59, "Bjørn Mork" <bjorn at mork.no> wrote:
>>>>> >
>>>>> > dailijin <dailijin126 at 126.com> writes:
>>>>> >
>>>>> > >
>>>>> > > Listening on LPF/wwan2/56:a2:2c:2a:7c:b4
>>>>> > That does not look like an interface in raw-ip mode. It will be a
>>>>> > point-to-point interface with no link address. Did you set it to
>>>>> > raw-ip
>>>>> > by writing Y (or y or 1) to /sys/class/net/wwan2/qmi/raw_ip ?
>>>>> >
>>>>> > Note that the ISC dhcp client won't work without patching on such
>>>>> > interfaces. I recommend the busybox dhcp client for simple initial
>>>>> > testing, if you want to try dhcp. Or just use static address
>>>>> > config
>>>>> > with input from QMI.
>>>>> >
>>>>> > The busybox dhcp client is packaged as 'udhcpc' in Debian. Version
>>>>> > 1:1.22.0-9+deb8u1 from Jessie worked fine with raw-ip
>>>>> > interfaces. I
>>>>> > assume Ubuntu will have similar packages.
>>>>> >
>>>>> >
>>>>> >
>>>>> > Bjørn
>>>>> > _______________________________________________
>>>>> > libqmi-devel mailing list
>>>>> > libqmi-devel at lists.freedesktop.org
>>>>> > http://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>>> _______________________________________________
>>>>> libqmi-devel mailing list
>>>>> libqmi-devel at lists.freedesktop.org
>>>>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>> _______________________________________________
>>>> libqmi-devel mailing list
>>>> libqmi-devel at lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>_______________________________________________
>>>libqmi-devel mailing list
>>>libqmi-devel at lists.freedesktop.org
>>>https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>> _______________________________________________
>> libqmi-devel mailing list
>> libqmi-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>_______________________________________________
>libqmi-devel mailing list
>libqmi-devel at lists.freedesktop.org
>https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20160406/2c31d9a2/attachment-0001.html>
More information about the libqmi-devel
mailing list