MC7455 PROBLEM

[Tang Nguyen]

I didn't see the output of command

qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=wxxx .vzwstatic,ip-type=4" --device-open-net="net-raw-ip| net-no-qos-header" --device-open-sync --client-no-release-cid -v

Can you put the debug output in your email.

Also, can you send the full output of AT+CGDCONT?.  Normally, it should be a list of profile.

Question:  Do you try to connect to live Verizon network or with base station simulator ?  Verizon modem connectivity is abit different with other module. Verizon modem would use PDP #1 to register with IP Multimedia System (IMS), and IMS is responsible for SMS, video message, etc.  For internet traffic, modem would use PDP#3 to connect to network.  If you instruct modem using PDP#1 to connect to Internet APN, it would fails.



--tang



--------------------------------------------
On Tue, 1/17/17, heni wael <waelheni91 at gmail.com> wrote:

 Subject: Re: MC7455 PROBLEM
 To: libqmi-devel at lists.freedesktop.org
 Date: Tuesday, January 17, 2017, 2:46 PM
 
 Hey Tang 
 Did you see the attached debug output 
 I used now the kernel 4.9 
 but same problem 
 It look a problem in the qmicli  
 Thanks
 
 2017-01-17 10:18 GMT+01:00
 Aleksander Morgado <aleksander at aleksander.es>:
 On Mon,
 Jan 16, 2017 at 5:25 PM, heni wael <waelheni91 at gmail.com>
 wrote:
 
 >
 
 > and i tried your suggestion  but got some issues
 
 > [root at mc7455-1-qpcs-local ~]# qmicli -d
 /dev/cdc-wdm0
 
 > --wds-set-autoconnect- settings=disabled
 
 > error: couldn't set autoconnect settings: QMI
 protocol error (3): 'Internal'
 
 >
 
 > have you got any advice ?
 
 
 
 Oh weird, no idea :/
 
 
 
 
 
 
 
 --
 
 Aleksander
 
 https://aleksander.es
 
 
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 libqmi-devel mailing list
 libqmi-devel at lists.freedesktop.org
 https://lists.freedesktop.org/mailman/listinfo/libqmi-devel