MC7455 PROBLEM
heni wael
waelheni91 at gmail.com
Tue Jan 17 20:24:22 UTC 2017
Thanks for reply
It work for a few day and then it give this errors
i got this :
AT+CGDCONT?
+CGDCONT: 1,"IP","xxxx.vzwstatic","0.0.0.0",0,0,0,0
OK
and this
[root at mc7455-1-qpcs-local ~]# qmicli -d /dev/cdc-wdm0
--wds-start-network="apn=xxxx.vzwstatic,ip-type=4"
--device-open-net="net-raw-ip|net-no-qos-header" --device-open-sync
--client-no-release-cid -v
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Opening device with flags
'sync, net-raw-ip, net-no-qos-header'...
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Running sync...
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message...
<<<<<< RAW:
<<<<<< length = 12
<<<<<< data = 01:0B:00:00:00:00:00:01:27:00:00:00
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message (translated)...
<<<<<< QMUX:
<<<<<< length = 11
<<<<<< flags = 0x00
<<<<<< service = "ctl"
<<<<<< client = 0
<<<<<< QMI:
<<<<<< flags = "none"
<<<<<< transaction = 1
<<<<<< tlv_length = 0
<<<<<< message = "Sync" (0x0027)
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>> RAW:
>>>>>> length = 19
>>>>>> data = 01:12:00:80:00:00:01:01:27:00:07:00:02:04:00:00:00:00:00
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message
(translated)...
>>>>>> QMUX:
>>>>>> length = 18
>>>>>> flags = 0x80
>>>>>> service = "ctl"
>>>>>> client = 0
>>>>>> QMI:
>>>>>> flags = "response"
>>>>>> transaction = 1
>>>>>> tlv_length = 7
>>>>>> message = "Sync" (0x0027)
>>>>>> TLV:
>>>>>> type = "Result" (0x02)
>>>>>> length = 4
>>>>>> value = 00:00:00:00
>>>>>> translated = SUCCESS
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sync operation finished
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Setting network port data
format...
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message...
<<<<<< RAW:
<<<<<< length = 21
<<<<<< data =
01:14:00:00:00:00:00:02:26:00:09:00:10:02:00:02:00:01:01:00:00
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message (translated)...
<<<<<< QMUX:
<<<<<< length = 20
<<<<<< flags = 0x00
<<<<<< service = "ctl"
<<<<<< client = 0
<<<<<< QMI:
<<<<<< flags = "none"
<<<<<< transaction = 2
<<<<<< tlv_length = 9
<<<<<< message = "Set Data Format" (0x0026)
<<<<<< TLV:
<<<<<< type = "Protocol" (0x10)
<<<<<< length = 2
<<<<<< value = 02:00
<<<<<< translated = raw-ip
<<<<<< TLV:
<<<<<< type = "Format" (0x01)
<<<<<< length = 1
<<<<<< value = 00
<<<<<< translated = absent
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>> RAW:
>>>>>> length = 28
>>>>>> data =
01:1B:00:80:00:00:01:02:26:00:10:00:02:04:00:00:00:00:00:12:01:00:00:10:02:00:02:00
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message
(translated)...
>>>>>> QMUX:
>>>>>> length = 27
>>>>>> flags = 0x80
>>>>>> service = "ctl"
>>>>>> client = 0
>>>>>> QMI:
>>>>>> flags = "response"
>>>>>> transaction = 2
>>>>>> tlv_length = 16
>>>>>> message = "Set Data Format" (0x0026)
>>>>>> TLV:
>>>>>> type = "Result" (0x02)
>>>>>> length = 4
>>>>>> value = 00:00:00:00
>>>>>> translated = SUCCESS
>>>>>> TLV:
>>>>>> type = 0x12
>>>>>> length = 1
>>>>>> value = 00
>>>>>> TLV:
>>>>>> type = "Protocol" (0x10)
>>>>>> length = 2
>>>>>> value = 02:00
>>>>>> translated = raw-ip
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Network port data format
operation finished
[17 ينا 2017, 15:19:27] [Debug] QMI Device at '/dev/cdc-wdm0' ready
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Assuming service 'wds' is
supported...
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Allocating new client ID...
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message...
<<<<<< RAW:
<<<<<< length = 16
<<<<<< data = 01:0F:00:00:00:00:00:03:22:00:04:00:01:01:00:01
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message (translated)...
<<<<<< QMUX:
<<<<<< length = 15
<<<<<< flags = 0x00
<<<<<< service = "ctl"
<<<<<< client = 0
<<<<<< QMI:
<<<<<< flags = "none"
<<<<<< transaction = 3
<<<<<< tlv_length = 4
<<<<<< message = "Allocate CID" (0x0022)
<<<<<< TLV:
<<<<<< type = "Service" (0x01)
<<<<<< length = 1
<<<<<< value = 01
<<<<<< translated = wds
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>> RAW:
>>>>>> length = 24
>>>>>> data =
01:17:00:80:00:00:01:03:22:00:0C:00:02:04:00:00:00:00:00:01:02:00:01:23
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message
(translated)...
>>>>>> QMUX:
>>>>>> length = 23
>>>>>> flags = 0x80
>>>>>> service = "ctl"
>>>>>> client = 0
>>>>>> QMI:
>>>>>> flags = "response"
>>>>>> transaction = 3
>>>>>> tlv_length = 12
>>>>>> message = "Allocate CID" (0x0022)
>>>>>> TLV:
>>>>>> type = "Result" (0x02)
>>>>>> length = 4
>>>>>> value = 00:00:00:00
>>>>>> translated = SUCCESS
>>>>>> TLV:
>>>>>> type = "Allocation Info" (0x01)
>>>>>> length = 2
>>>>>> value = 01:23
>>>>>> translated = [ service = 'wds' cid = '35' ]
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Registered 'wds' (version
unknown) client with ID '35'
[17 ينا 2017, 15:19:27] [Debug] Network start parameters set (apn:
'xxxx.vzwstatic', 3gpp_profile: '0', 3gpp2_profile: '0', auth:
'unspecified', username: 'unspecified', password: 'unspecified',
autoconnect: 'unspecified')
[17 ينا 2017, 15:19:27] [Debug] Asynchronously starting network...
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message...
<<<<<< RAW:
<<<<<< length = 34
<<<<<< data =
01:21:00:00:01:23:00:01:00:20:00:15:00:19:01:00:04:14:0E:00:77:65:30:31:2E:76:7A:77:73:74:61:74:69:63
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Sent message (translated)...
<<<<<< QMUX:
<<<<<< length = 33
<<<<<< flags = 0x00
<<<<<< service = "wds"
<<<<<< client = 35
<<<<<< QMI:
<<<<<< flags = "none"
<<<<<< transaction = 1
<<<<<< tlv_length = 21
<<<<<< message = "Start Network" (0x0020)
<<<<<< TLV:
<<<<<< type = "IP Family Preference" (0x19)
<<<<<< length = 1
<<<<<< value = 04
<<<<<< translated = ipv4
<<<<<< TLV:
<<<<<< type = "APN" (0x14)
<<<<<< length = 14
<<<<<< value = 77:65:30:31:2E:76:7A:77:73:74:61:74:69:63
<<<<<< translated = xxxx.vzwstatic
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>> RAW:
>>>>>> length = 20
>>>>>> data =
01:13:00:80:01:23:02:01:00:20:00:07:00:02:04:00:01:00:1A:00
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Received message
(translated)...
>>>>>> QMUX:
>>>>>> length = 19
>>>>>> flags = 0x80
>>>>>> service = "wds"
>>>>>> client = 35
>>>>>> QMI:
>>>>>> flags = "response"
>>>>>> transaction = 1
>>>>>> tlv_length = 7
>>>>>> message = "Start Network" (0x0020)
>>>>>> TLV:
>>>>>> type = "Result" (0x02)
>>>>>> length = 4
>>>>>> value = 01:00:1A:00
>>>>>> translated = FAILURE: NoEffect
error: couldn't start network: QMI protocol error (26): 'NoEffect'
[/dev/cdc-wdm0] Client ID not released:
Service: 'wds'
CID: '35'
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Releasing 'wds' client with
flags 'none'...
[17 ينا 2017, 15:19:27] [Debug] [/dev/cdc-wdm0] Unregistered 'wds' client
with ID '35'
[17 ينا 2017, 15:19:27] [Debug] Client released
2017-01-17 21:02 GMT+01:00 Tang Nguyen <tang_nguyen at yahoo.com>:
> I didn't see the output of command
>
> qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=wxxx
> .vzwstatic,ip-type=4" --device-open-net="net-raw-ip| net-no-qos-header"
> --device-open-sync --client-no-release-cid -v
>
> Can you put the debug output in your email.
>
> Also, can you send the full output of AT+CGDCONT?. Normally, it should be
> a list of profile.
>
> Question: Do you try to connect to live Verizon network or with base
> station simulator ? Verizon modem connectivity is abit different with
> other module. Verizon modem would use PDP #1 to register with IP Multimedia
> System (IMS), and IMS is responsible for SMS, video message, etc. For
> internet traffic, modem would use PDP#3 to connect to network. If you
> instruct modem using PDP#1 to connect to Internet APN, it would fails.
>
>
>
> --tang
>
>
>
> --------------------------------------------
> On Tue, 1/17/17, heni wael <waelheni91 at gmail.com> wrote:
>
> Subject: Re: MC7455 PROBLEM
> To: libqmi-devel at lists.freedesktop.org
> Date: Tuesday, January 17, 2017, 2:46 PM
>
> Hey Tang
> Did you see the attached debug output
> I used now the kernel 4.9
> but same problem
> It look a problem in the qmicli
> Thanks
>
> 2017-01-17 10:18 GMT+01:00
> Aleksander Morgado <aleksander at aleksander.es>:
> On Mon,
> Jan 16, 2017 at 5:25 PM, heni wael <waelheni91 at gmail.com>
> wrote:
>
> >
>
> > and i tried your suggestion but got some issues
>
> > [root at mc7455-1-qpcs-local ~]# qmicli -d
> /dev/cdc-wdm0
>
> > --wds-set-autoconnect- settings=disabled
>
> > error: couldn't set autoconnect settings: QMI
> protocol error (3): 'Internal'
>
> >
>
> > have you got any advice ?
>
>
>
> Oh weird, no idea :/
>
>
>
>
>
>
>
> --
>
> Aleksander
>
> https://aleksander.es
>
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20170117/239b3d8d/attachment-0001.html>
More information about the libqmi-devel
mailing list