[Mesa-dev] [PATCH v2 1/4] mesa: merge bind_xfb_buffers_{base|range}
Ian Romanick
idr at freedesktop.org
Fri Jan 8 15:27:36 PST 2016
On 01/08/2016 08:44 AM, Nicolai Hähnle wrote:
> From: Nicolai Hähnle <nicolai.haehnle at amd.com>
>
> Reduced code duplication should make the code more maintainable.
> ---
> src/mesa/main/bufferobj.c | 172 ++++++++++++++++------------------------------
> 1 file changed, 59 insertions(+), 113 deletions(-)
>
> diff --git a/src/mesa/main/bufferobj.c b/src/mesa/main/bufferobj.c
> index d7c5680..1d221de 100644
> --- a/src/mesa/main/bufferobj.c
> +++ b/src/mesa/main/bufferobj.c
> @@ -3537,84 +3537,19 @@ unbind_xfb_buffers(struct gl_context *ctx,
> }
>
> static void
> -bind_xfb_buffers_base(struct gl_context *ctx,
> - GLuint first, GLsizei count,
> - const GLuint *buffers)
> -{
> - struct gl_transform_feedback_object *tfObj =
> - ctx->TransformFeedback.CurrentObject;
> - GLint i;
> -
> - if (!error_check_bind_xfb_buffers(ctx, tfObj, first, count,
> - "glBindBuffersBase"))
> - return;
> -
> - /* Assume that at least one binding will be changed */
> - FLUSH_VERTICES(ctx, 0);
> - ctx->NewDriverState |= ctx->DriverFlags.NewTransformFeedback;
> -
> - if (!buffers) {
> - /* The ARB_multi_bind spec says:
> - *
> - * "If <buffers> is NULL, all bindings from <first> through
> - * <first>+<count>-1 are reset to their unbound (zero) state."
> - */
> - unbind_xfb_buffers(ctx, tfObj, first, count);
> - return;
> - }
> -
> - /* Note that the error semantics for multi-bind commands differ from
> - * those of other GL commands.
> - *
> - * The Issues section in the ARB_multi_bind spec says:
> - *
> - * "(11) Typically, OpenGL specifies that if an error is generated by a
> - * command, that command has no effect. This is somewhat
> - * unfortunate for multi-bind commands, because it would require a
> - * first pass to scan the entire list of bound objects for errors
> - * and then a second pass to actually perform the bindings.
> - * Should we have different error semantics?
> - *
> - * RESOLVED: Yes. In this specification, when the parameters for
> - * one of the <count> binding points are invalid, that binding point
> - * is not updated and an error will be generated. However, other
> - * binding points in the same command will be updated if their
> - * parameters are valid and no other error occurs."
> - */
> -
> - _mesa_begin_bufferobj_lookups(ctx);
> -
> - for (i = 0; i < count; i++) {
> - struct gl_buffer_object * const boundBufObj = tfObj->Buffers[first + i];
> - struct gl_buffer_object *bufObj;
> -
> - if (boundBufObj && boundBufObj->Name == buffers[i])
> - bufObj = boundBufObj;
> - else
> - bufObj = _mesa_multi_bind_lookup_bufferobj(ctx, buffers, i,
> - "glBindBuffersBase");
> -
> - if (bufObj)
> - _mesa_set_transform_feedback_binding(ctx, tfObj, first + i,
> - bufObj, 0, 0);
> - }
> -
> - _mesa_end_bufferobj_lookups(ctx);
> -}
> -
> -static void
> -bind_xfb_buffers_range(struct gl_context *ctx,
> - GLuint first, GLsizei count,
> - const GLuint *buffers,
> - const GLintptr *offsets,
> - const GLsizeiptr *sizes)
> +bind_xfb_buffers(struct gl_context *ctx,
> + GLuint first, GLsizei count,
> + const GLuint *buffers,
> + GLboolean range,
If you use bool, true, and false instead of the GL names, the series is
Reviewed-by: Ian Romanick <ian.d.romanick at intel.com>
> + const GLintptr *offsets,
> + const GLsizeiptr *sizes,
> + const char *caller)
> {
> struct gl_transform_feedback_object *tfObj =
> ctx->TransformFeedback.CurrentObject;
> GLint i;
>
> - if (!error_check_bind_xfb_buffers(ctx, tfObj, first, count,
> - "glBindBuffersRange"))
> + if (!error_check_bind_xfb_buffers(ctx, tfObj, first, count, caller))
> return;
>
> /* Assume that at least one binding will be changed */
> @@ -3659,55 +3594,64 @@ bind_xfb_buffers_range(struct gl_context *ctx,
> const GLuint index = first + i;
> struct gl_buffer_object * const boundBufObj = tfObj->Buffers[index];
> struct gl_buffer_object *bufObj;
> + GLintptr offset = 0;
> + GLsizeiptr size = 0;
>
> - if (!bind_buffers_check_offset_and_size(ctx, i, offsets, sizes))
> - continue;
> + if (range) {
> + offset = offsets[i];
> + size = sizes[i];
>
> - /* The ARB_multi_bind spec says:
> - *
> - * "An INVALID_VALUE error is generated by BindBuffersRange if any
> - * pair of values in <offsets> and <sizes> does not respectively
> - * satisfy the constraints described for those parameters for the
> - * specified target, as described in section 6.7.1 (per binding)."
> - *
> - * Section 6.7.1 refers to table 6.5, which says:
> - *
> - * "┌───────────────────────────────────────────────────────────────┐
> - * │ Transform feedback array bindings (see sec. 13.2.2) │
> - * ├───────────────────────┬───────────────────────────────────────┤
> - * │ ... │ ... │
> - * │ offset restriction │ multiple of 4 │
> - * │ ... │ ... │
> - * │ size restriction │ multiple of 4 │
> - * └───────────────────────┴───────────────────────────────────────┘"
> - */
> - if (offsets[i] & 0x3) {
> - _mesa_error(ctx, GL_INVALID_VALUE,
> - "glBindBuffersRange(offsets[%u]=%" PRId64
> - " is misaligned; it must be a multiple of 4 when "
> - "target=GL_TRANSFORM_FEEDBACK_BUFFER)",
> - i, (int64_t) offsets[i]);
> - continue;
> - }
> + if (!bind_buffers_check_offset_and_size(ctx, i, offsets, sizes))
> + continue;
>
> - if (sizes[i] & 0x3) {
> - _mesa_error(ctx, GL_INVALID_VALUE,
> - "glBindBuffersRange(sizes[%u]=%" PRId64
> - " is misaligned; it must be a multiple of 4 when "
> - "target=GL_TRANSFORM_FEEDBACK_BUFFER)",
> - i, (int64_t) sizes[i]);
> - continue;
> + /* The ARB_multi_bind spec says:
> + *
> + * "An INVALID_VALUE error is generated by BindBuffersRange if any
> + * pair of values in <offsets> and <sizes> does not respectively
> + * satisfy the constraints described for those parameters for the
> + * specified target, as described in section 6.7.1 (per binding)."
> + *
> + * Section 6.7.1 refers to table 6.5, which says:
> + *
> + * "┌───────────────────────────────────────────────────────────────┐
> + * │ Transform feedback array bindings (see sec. 13.2.2) │
> + * ├───────────────────────┬───────────────────────────────────────┤
> + * │ ... │ ... │
> + * │ offset restriction │ multiple of 4 │
> + * │ ... │ ... │
> + * │ size restriction │ multiple of 4 │
> + * └───────────────────────┴───────────────────────────────────────┘"
> + */
> + if (offsets[i] & 0x3) {
> + _mesa_error(ctx, GL_INVALID_VALUE,
> + "glBindBuffersRange(offsets[%u]=%" PRId64
> + " is misaligned; it must be a multiple of 4 when "
> + "target=GL_TRANSFORM_FEEDBACK_BUFFER)",
> + i, (int64_t) offsets[i]);
> + continue;
> + }
> +
> + if (sizes[i] & 0x3) {
> + _mesa_error(ctx, GL_INVALID_VALUE,
> + "glBindBuffersRange(sizes[%u]=%" PRId64
> + " is misaligned; it must be a multiple of 4 when "
> + "target=GL_TRANSFORM_FEEDBACK_BUFFER)",
> + i, (int64_t) sizes[i]);
> + continue;
> + }
> +
> + offset = offsets[i];
> + size = sizes[i];
> }
>
> if (boundBufObj && boundBufObj->Name == buffers[i])
> bufObj = boundBufObj;
> else
> - bufObj = _mesa_multi_bind_lookup_bufferobj(ctx, buffers, i,
> - "glBindBuffersRange");
> + bufObj = _mesa_multi_bind_lookup_bufferobj(ctx, buffers, i, caller);
>
> if (bufObj)
> _mesa_set_transform_feedback_binding(ctx, tfObj, index, bufObj,
> - offsets[i], sizes[i]);
> + offset, size);
> }
>
> _mesa_end_bufferobj_lookups(ctx);
> @@ -4068,7 +4012,8 @@ _mesa_BindBuffersRange(GLenum target, GLuint first, GLsizei count,
>
> switch (target) {
> case GL_TRANSFORM_FEEDBACK_BUFFER:
> - bind_xfb_buffers_range(ctx, first, count, buffers, offsets, sizes);
> + bind_xfb_buffers(ctx, first, count, buffers, GL_TRUE, offsets, sizes,
> + "glBindBuffersRange");
> return;
> case GL_UNIFORM_BUFFER:
> bind_uniform_buffers_range(ctx, first, count, buffers, offsets, sizes);
> @@ -4101,7 +4046,8 @@ _mesa_BindBuffersBase(GLenum target, GLuint first, GLsizei count,
>
> switch (target) {
> case GL_TRANSFORM_FEEDBACK_BUFFER:
> - bind_xfb_buffers_base(ctx, first, count, buffers);
> + bind_xfb_buffers(ctx, first, count, buffers, GL_FALSE, NULL, NULL,
> + "glBindBuffersBase");
> return;
> case GL_UNIFORM_BUFFER:
> bind_uniform_buffers_base(ctx, first, count, buffers);
>
More information about the mesa-dev
mailing list