[poppler] evas support for poppler
Vincent Torri
vtorri at univ-evry.fr
Sun Jan 22 13:53:52 PST 2006
oups.. I've forget some files to add to the m4/ subdir. Here they are.
Vincent
>
> Well, you could make it work ;-)
>
> After applying the two diffs and running autogen i get
>
> checking for Qt4 libraries... no
> ./configure: line 26278: syntax error near unexpected token `evas,'
> ./configure: line 26278: ` AC_PATH_GENERIC(evas, 0.9.9,'
>
> Albert
>
> >
> > thank you
> >
> > Vincent
>
>
> ______________________________________________
> LLama Gratis a cualquier PC del Mundo.
> Llamadas a fijos y móviles desde 1 céntimo por minuto.
> http://es.voice.yahoo.com
> _______________________________________________
> poppler mailing list
> poppler at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/poppler
>
-------------- next part --------------
dnl @synopsis AC_PATH_GENERIC(LIBRARY [, MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl
dnl Runs a LIBRARY-config script and defines LIBRARY_CFLAGS and LIBRARY_LIBS
dnl
dnl The script must support `--cflags' and `--libs' args.
dnl If MINIMUM-VERSION is specified, the script must also support the
dnl `--version' arg.
dnl If the `--with-library-[exec-]prefix' arguments to ./configure are given,
dnl it must also support `--prefix' and `--exec-prefix'.
dnl (In other words, it must be like gtk-config.)
dnl
dnl For example:
dnl
dnl AC_PATH_GENERIC(Foo, 1.0.0)
dnl
dnl would run `foo-config --version' and check that it is at least 1.0.0
dnl
dnl If so, the following would then be defined:
dnl
dnl FOO_CFLAGS to `foo-config --cflags`
dnl FOO_LIBS to `foo-config --libs`
dnl
dnl At present there is no support for additional "MODULES" (see AM_PATH_GTK)
dnl (shamelessly stolen from gtk.m4 and then hacked around a fair amount)
dnl
dnl @author Angus Lees <gusl at cse.unsw.edu.au>
AC_DEFUN([AC_PATH_GENERIC],
[dnl
dnl we're going to need uppercase, lowercase and user-friendly versions of the
dnl string `LIBRARY'
pushdef([UP], translit([$1], [a-z], [A-Z]))dnl
pushdef([DOWN], translit([$1], [A-Z], [a-z]))dnl
dnl
dnl Get the cflags and libraries from the LIBRARY-config script
dnl
AC_ARG_WITH(DOWN-prefix,
[ --with-]DOWN[-prefix=PFX Prefix where $1 is installed (optional)],
DOWN[]_config_prefix="$withval", DOWN[]_config_prefix="")
AC_ARG_WITH(DOWN-exec-prefix,
[ --with-]DOWN[-exec-prefix=PFX Exec prefix where $1 is installed (optional)],
DOWN[]_config_exec_prefix="$withval", DOWN[]_config_exec_prefix="")
if test x$DOWN[]_config_exec_prefix != x ; then
DOWN[]_config_args="$DOWN[]_config_args --exec-prefix=$DOWN[]_config_exec_prefix"
if test x${UP[]_CONFIG+set} != xset ; then
UP[]_CONFIG=$DOWN[]_config_exec_prefix/bin/DOWN-config
fi
fi
if test x$DOWN[]_config_prefix != x ; then
DOWN[]_config_args="$DOWN[]_config_args --prefix=$DOWN[]_config_prefix"
if test x${UP[]_CONFIG+set} != xset ; then
UP[]_CONFIG=$DOWN[]_config_prefix/bin/DOWN-config
fi
fi
AC_PATH_PROG(UP[]_CONFIG, DOWN-config, no)
ifelse([$2], ,
AC_MSG_CHECKING(for $1),
AC_MSG_CHECKING(for $1 - version >= $2)
)
no_[]DOWN=""
if test "$UP[]_CONFIG" = "no" ; then
no_[]DOWN=yes
else
UP[]_CFLAGS="`$UP[]_CONFIG $DOWN[]_config_args --cflags`"
UP[]_LIBS="`$UP[]_CONFIG $DOWN[]_config_args --libs`"
ifelse([$2], , ,[
DOWN[]_config_major_version=`$UP[]_CONFIG $DOWN[]_config_args \
--version | sed 's/[[^0-9]]*\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\1/'`
DOWN[]_config_minor_version=`$UP[]_CONFIG $DOWN[]_config_args \
--version | sed 's/[[^0-9]]*\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\2/'`
DOWN[]_config_micro_version=`$UP[]_CONFIG $DOWN[]_config_args \
--version | sed 's/[[^0-9]]*\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\3/'`
DOWN[]_wanted_major_version="regexp($2, [\<\([0-9]*\)], [\1])"
DOWN[]_wanted_minor_version="regexp($2, [\<\([0-9]*\)\.\([0-9]*\)], [\2])"
DOWN[]_wanted_micro_version="regexp($2, [\<\([0-9]*\).\([0-9]*\).\([0-9]*\)], [\3])"
# Compare wanted version to what config script returned.
# If I knew what library was being run, i'd probably also compile
# a test program at this point (which also extracted and tested
# the version in some library-specific way)
if test "$DOWN[]_config_major_version" -lt \
"$DOWN[]_wanted_major_version" \
-o \( "$DOWN[]_config_major_version" -eq \
"$DOWN[]_wanted_major_version" \
-a "$DOWN[]_config_minor_version" -lt \
"$DOWN[]_wanted_minor_version" \) \
-o \( "$DOWN[]_config_major_version" -eq \
"$DOWN[]_wanted_major_version" \
-a "$DOWN[]_config_minor_version" -eq \
"$DOWN[]_wanted_minor_version" \
-a "$DOWN[]_config_micro_version" -lt \
"$DOWN[]_wanted_micro_version" \) ; then
# older version found
no_[]DOWN=yes
echo -n "*** An old version of $1 "
echo -n "($DOWN[]_config_major_version"
echo -n ".$DOWN[]_config_minor_version"
echo ".$DOWN[]_config_micro_version) was found."
echo -n "*** You need a version of $1 newer than "
echo -n "$DOWN[]_wanted_major_version"
echo -n ".$DOWN[]_wanted_minor_version"
echo ".$DOWN[]_wanted_micro_version."
echo "***"
echo "*** If you have already installed a sufficiently new version, this error"
echo "*** probably means that the wrong copy of the DOWN-config shell script is"
echo "*** being found. The easiest way to fix this is to remove the old version"
echo "*** of $1, but you can also set the UP[]_CONFIG environment to point to the"
echo "*** correct copy of DOWN-config. (In this case, you will have to"
echo "*** modify your LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf"
echo "*** so that the correct libraries are found at run-time)"
fi
])
fi
if test "x$no_[]DOWN" = x ; then
AC_MSG_RESULT(yes)
ifelse([$3], , :, [$3])
else
AC_MSG_RESULT(no)
if test "$UP[]_CONFIG" = "no" ; then
echo "*** The DOWN-config script installed by $1 could not be found"
echo "*** If $1 was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the UP[]_CONFIG environment variable to the"
echo "*** full path to DOWN-config."
fi
UP[]_CFLAGS=""
UP[]_LIBS=""
ifelse([$4], , :, [$4])
fi
AC_SUBST(UP[]_CFLAGS)
AC_SUBST(UP[]_LIBS)
popdef([UP])
popdef([DOWN])
])
-------------- next part --------------
dnl AC_EXPAND_DIR(VARNAME, DIR)
dnl expands occurrences of ${prefix} and ${exec_prefix} in the given DIR,
dnl and assigns the resulting string to VARNAME
dnl example: AC_DEFINE_DIR(DATADIR, "$datadir")
dnl by Alexandre Oliva <oliva at dcc.unicamp.br>
AC_DEFUN([AC_EXPAND_DIR], [
$1=$2
$1=`(
test "x$prefix" = xNONE && prefix="$ac_default_prefix"
test "x$exec_prefix" = xNONE && exec_prefix="${prefix}"
eval echo \""[$]$1"\"
)`
])
-------------- next part --------------
AC_DEFUN([AC_C___ATTRIBUTE__],
[
AC_MSG_CHECKING(for __attribute__)
AC_CACHE_VAL(ac_cv___attribute__, [
AC_TRY_COMPILE([#include <stdlib.h>],
[int func(int x); int foo(int x __attribute__ ((unused))) { exit(1); }],
ac_cv___attribute__=yes, ac_cv___attribute__=no)])
if test "$ac_cv___attribute__" = "yes"; then
AC_DEFINE(HAVE___ATTRIBUTE__, 1, [Define to 1 if your compiler has __attribute__])
fi
AC_MSG_RESULT($ac_cv___attribute__)
])
More information about the poppler
mailing list