[pulseaudio-discuss] Problems running pulseaudio on Slackware based system

[Robert Gabriel]

OK, check attachements. There are 2, one when everything is by default
and the second pacmd1.list.gz
when in default.pa is set load-module module-alsa-sink device=hw:0 and
load-module module-alsa-source device=hw:0.

NOTE: none of the configuration allows the sound to work when KDE
starts (you know the welcome sound or whatever is called).

Also I dont have a docking station.

On Sun, Jan 30, 2011 at 12:46, Colin Guthrie <gmane at colin.guthr.ie> wrote:
> 'Twas brillig, and Robert Gabriel at 30/01/11 11:33 did gyre and gimble:
>> On Sun, Jan 30, 2011 at 12:29, Colin Guthrie <gmane at colin.guthr.ie> wrote:
>>> 'Twas brillig, and Robert Gabriel at 29/01/11 23:38 did gyre and gimble:
>>>> Also, if I setup in default.pa:
>>>>
>>>> load-module module-alsa-sink device=hw:0
>>>> load-module module-alsa-source device=hw:0
>>>>
>>>> and make sure that in daemon.conf everything is by default, then the
>>>> sound seems to work.
>>>
>>> What is more surprising is that your debug log correctly shows PA
>>> probing for the various profiles and finding them, then creating the
>>> sinks and sources correctly...
>>>
>>> e.g.
>>> D: alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo supported.
>>>
>>> So I'm pretty sure just setting everything to default in daemon.conf is
>>> what fixed it, and you can forget the two load-module's above...
>>
>> Yes but it only works if I do this in default.pa:
>>
>> load-module module-alsa-sink device=hw:0
>> load-module module-alsa-source device=hw:0
>>
>> otherwise it doesnt work the sound.
>
> Please remove these two lines, start PA and then do a "pacmd list" and
> attach that output here.
>
> I strongly suspect that there is no problem with the sound itself, but
> rather one of configuration.
>
> I also see you are running phonon and thus KDE. Depending on how you
> boot, this could load a different module for stream routing. But I'll
> advise more on that after you supply the above output.
>
> FWIW, the "Failed to find a working profile" error you see is actually
> from a second sound device on your machine (card 29, which is a very
> high index. Not sure what this is, but it's certainly not hw:0 and is
> likely something strange perhaps a docking station or something?)
>
>
> Col
>
>
> --
>
> Colin Guthrie
> gmane(at)colin.guthr.ie
> http://colin.guthr.ie/
>
> Day Job:
>  Tribalogic Limited [http://www.tribalogic.net/]
> Open Source:
>  Mageia Contributor [http://www.mageia.org/]
>  PulseAudio Hacker [http://www.pulseaudio.org/]
>  Trac Hacker [http://trac.edgewall.org/]
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at mail.0pointer.de
> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pacmd.list.gz
Type: application/x-gzip
Size: 3118 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20110130/23d7c404/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pacmd1.list.gz
Type: application/x-gzip
Size: 3286 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20110130/23d7c404/attachment-0001.bin>