[pulseaudio-discuss] Problems trying to connecf HFP device

[Franz Glauber]

On Tue, Mar 1, 2011 at 8:26 AM, Colin Guthrie <gmane at colin.guthr.ie> wrote:

> 'Twas brillig, and Franz Glauber at 01/03/11 11:20 did gyre and gimble:
> >
> >
> > On Tue, Mar 1, 2011 at 8:18 AM, Colin Guthrie <gmane at colin.guthr.ie
> > <mailto:gmane at colin.guthr.ie>> wrote:
> >
> >     'Twas brillig, and Franz Glauber at 01/03/11 11:16 did gyre and
> gimble:
> >     > Hi Daniel!
> >     >
> >     > Thanks for the help, but it doesn't seem to be the issue here. What
> >     > happens is that whenever I try to open any PA control interface, it
> >     > freezes while waiting for some reply from the device and then it
> fails
> >     > with a Timeout or such. That is exactly what happened while trying
> to
> >     > issue those commands:
> >     >
> >     > $ pactl load-module module-loopback
> >     source="alsa_input.pci-0000_00_14.2"
> >     > sink="bluez_sink.88_88_00_B9_CC_DD"
> >     > <30-second wait>
> >     > Connection fail: Timeout (translated this back to english, not sure
> if
> >     > the message is this...
> >
> >     Are you doing this via an SSH connection? If so, make sure you unset
> >     $DISPLAY or use ssh -x
> >
> >
> > No, it was a normal console (yakuake). Besides, it's the same behavior
> > as when I open 'pavueditor' just after connecting the HFP device (some
> > wait followed by an error).
>
> Issues such as "where to connect" would affect all PA clients the same
> way (as it's something libpulse does), so it's not in the least
> surprising that this affects pavueditor (is this a new tool, or do you
> mean pavucontrol?) too.
>
> Can you supply:
>
> whoami (should be the same user as pulseaudio daemon - not e.g. root)
>
> ps aux | grep pulse
>

Both return my username.

>
> PULSE_LOG=99 paplay -vvvv
> /usr/share/sounds/freedesktop/stereo/dialog-warning.oga (or some .wav
> file - it's not really important)
>

With the device connected, only get:

Abrindo um fluxo playback com a especificação de amostragem "float32le 2ch
44100Hz" e mapeamento de canais "front-left,front-right".
Using shared memory pool with 1024 slots of size 64,0 KiB each, total size
is 64,0 MiB, maximum usable slot size is 65472
Trying to connect to
/home/franz/.pulse/056d645cad154b3e13840dc900000128-runtime/native...

[big pause here, after which the device fails]

SHM possible: yes
Protocol version: remote 16, local 16
Negotiated SHM: yes
Conexão estabelecida.
Fluxo criado com sucesso.
Métricas do buffer: maxlength=4194304, tlength=705600, prebuf=698552,
minreq=7056
Usando especificação de amostragem "float32le 2ch 44100Hz", mapa de canais
"front-left,front-right".
Conectado ao dispositivo alsa_output.pci-0000_00_14.2.analog-stereo (0, not
suspended).
Fluxo iniciado.
Subestimação do fluxo.
Fluxo de reprodução drenado. 221073 usec.
Drenando conexão para o servidor.



> xprop -root | grep -i PULSE
> cat ~/.pulse/client.conf /etc/pulse/client.conf | grep default-server
> env | grep -i PULSE
>
>
~/.pulse/client.conf doesn't exist, and default-server is commented out on
main config
xprop and env doesn't return anything.

-- 
Franz

http://ciudaddelpico.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20110301/9122069b/attachment.htm>