dri-devel August 2021

dri-devel@lists.freedesktop.org

324 participants
762 discussions

[PATCH v5] drm/msm/dsi: add continuous clock support for 7nm PHY
by Dmitry Baryshkov 11 Aug '21

11 Aug '21

Unlike previous generations, 7nm PHYs are required to collaborate with the host for conitnuos clock mode. Add changes neccessary to enable continuous clock mode in the 7nm DSI PHYs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> --- Changes since v4: - Fix the comment regarding msm_dsi_phy_set_continuous_clock() Changes since v3: - Invert the DSI_LANE_CTRL_HS_REQ_SEL_PHY bit logic, as noted by Abhinav. Changes since v2: - Really drop msm_dsi_phy_needs_hs_phy_sel() Changes since v1: - Remove the need for a separate msm_dsi_phy_needs_hs_phy_sel() call - Fix setting continuous clock for a dual DSI case. --- drivers/gpu/drm/msm/dsi/dsi.h | 3 ++- drivers/gpu/drm/msm/dsi/dsi.xml.h | 1 + drivers/gpu/drm/msm/dsi/dsi_host.c | 12 ++++++++---- drivers/gpu/drm/msm/dsi/dsi_manager.c | 4 ++-- drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 9 +++++++++ drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 + drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 17 +++++++++++++++++ 7 files changed, 40 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h index 9b8e9b07eced..58e63bf34fe9 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.h +++ b/drivers/gpu/drm/msm/dsi/dsi.h @@ -109,7 +109,7 @@ int msm_dsi_host_enable(struct mipi_dsi_host *host); int msm_dsi_host_disable(struct mipi_dsi_host *host); int msm_dsi_host_power_on(struct mipi_dsi_host *host, struct msm_dsi_phy_shared_timings *phy_shared_timings, - bool is_dual_dsi); + bool is_dual_dsi, struct msm_dsi_phy *phy); int msm_dsi_host_power_off(struct mipi_dsi_host *host); int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host, const struct drm_display_mode *mode); @@ -175,6 +175,7 @@ int msm_dsi_phy_get_clk_provider(struct msm_dsi_phy *phy, void msm_dsi_phy_pll_save_state(struct msm_dsi_phy *phy); int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy); void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy); +bool msm_dsi_phy_set_continuous_clock(struct msm_dsi_phy *phy, bool enable); #endif /* __DSI_CONNECTOR_H__ */ diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h index eadbcc78fd72..473c81605054 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.xml.h +++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h @@ -518,6 +518,7 @@ static inline uint32_t DSI_CLKOUT_TIMING_CTRL_T_CLK_POST(uint32_t val) #define DSI_LANE_STATUS_DLN0_DIRECTION 0x00010000 #define REG_DSI_LANE_CTRL 0x000000a8 +#define DSI_LANE_CTRL_HS_REQ_SEL_PHY 0x01000000 #define DSI_LANE_CTRL_CLKLN_HS_FORCE_REQUEST 0x10000000 #define REG_DSI_LANE_SWAP_CTRL 0x000000ac diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index ed504fe5074f..3558e5cd400f 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -834,7 +834,7 @@ static inline enum dsi_cmd_dst_format dsi_get_cmd_fmt( } static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable, - struct msm_dsi_phy_shared_timings *phy_shared_timings) + struct msm_dsi_phy_shared_timings *phy_shared_timings, struct msm_dsi_phy *phy) { u32 flags = msm_host->mode_flags; enum mipi_dsi_pixel_format mipi_fmt = msm_host->format; @@ -929,6 +929,10 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable, if (!(flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)) { lane_ctrl = dsi_read(msm_host, REG_DSI_LANE_CTRL); + + if (msm_dsi_phy_set_continuous_clock(phy, enable)) + lane_ctrl &= ~DSI_LANE_CTRL_HS_REQ_SEL_PHY; + dsi_write(msm_host, REG_DSI_LANE_CTRL, lane_ctrl | DSI_LANE_CTRL_CLKLN_HS_FORCE_REQUEST); } @@ -2354,7 +2358,7 @@ static void msm_dsi_sfpb_config(struct msm_dsi_host *msm_host, bool enable) int msm_dsi_host_power_on(struct mipi_dsi_host *host, struct msm_dsi_phy_shared_timings *phy_shared_timings, - bool is_dual_dsi) + bool is_dual_dsi, struct msm_dsi_phy *phy) { struct msm_dsi_host *msm_host = to_msm_dsi_host(host); const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd; @@ -2394,7 +2398,7 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host, dsi_timing_setup(msm_host, is_dual_dsi); dsi_sw_reset(msm_host); - dsi_ctrl_config(msm_host, true, phy_shared_timings); + dsi_ctrl_config(msm_host, true, phy_shared_timings, phy); if (msm_host->disp_en_gpio) gpiod_set_value(msm_host->disp_en_gpio, 1); @@ -2425,7 +2429,7 @@ int msm_dsi_host_power_off(struct mipi_dsi_host *host) goto unlock_ret; } - dsi_ctrl_config(msm_host, false, NULL); + dsi_ctrl_config(msm_host, false, NULL, NULL); if (msm_host->disp_en_gpio) gpiod_set_value(msm_host->disp_en_gpio, 0); diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index 4ebfedc4a9ac..1b89fef8f805 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -381,7 +381,7 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) if (ret) goto phy_en_fail; - ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi); + ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi, msm_dsi->phy); if (ret) { pr_err("%s: power on host %d failed, %d\n", __func__, id, ret); goto host_on_fail; @@ -389,7 +389,7 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) if (is_dual_dsi && msm_dsi1) { ret = msm_dsi_host_power_on(msm_dsi1->host, - &phy_shared_timings[DSI_1], is_dual_dsi); + &phy_shared_timings[DSI_1], is_dual_dsi, msm_dsi1->phy); if (ret) { pr_err("%s: power on host1 failed, %d\n", __func__, ret); diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index 6ca6bfd4809b..723d2eeafa69 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -835,6 +835,15 @@ void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy, phy->usecase = uc; } +/* Returns true if we have to clear DSI_LANE_CTRL.HS_REQ_SEL_PHY */ +bool msm_dsi_phy_set_continuous_clock(struct msm_dsi_phy *phy, bool enable) +{ + if (!phy || !phy->cfg->ops.set_continuous_clock) + return false; + + return phy->cfg->ops.set_continuous_clock(phy, enable); +} + int msm_dsi_phy_get_clk_provider(struct msm_dsi_phy *phy, struct clk **byte_clk_provider, struct clk **pixel_clk_provider) { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h index 5b0feef87127..43dee28450b4 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h @@ -24,6 +24,7 @@ struct msm_dsi_phy_ops { void (*disable)(struct msm_dsi_phy *phy); void (*save_pll_state)(struct msm_dsi_phy *phy); int (*restore_pll_state)(struct msm_dsi_phy *phy); + bool (*set_continuous_clock)(struct msm_dsi_phy *phy, bool enable); }; struct msm_dsi_phy_cfg { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c index 7c23d4c47338..a78a0c45d101 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c @@ -932,6 +932,21 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy, return 0; } +static bool dsi_7nm_set_continuous_clock(struct msm_dsi_phy *phy, bool enable) +{ + void __iomem *base = phy->base; + u32 data; + + data = dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_LANE_CTRL1); + if (enable) + data |= BIT(5) | BIT(6); + else + data &= ~(BIT(5) | BIT(6)); + dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_LANE_CTRL1, data); + + return enable; +} + static void dsi_7nm_phy_disable(struct msm_dsi_phy *phy) { void __iomem *base = phy->base; @@ -972,6 +987,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = { .pll_init = dsi_pll_7nm_init, .save_pll_state = dsi_7nm_pll_save_state, .restore_pll_state = dsi_7nm_pll_restore_state, + .set_continuous_clock = dsi_7nm_set_continuous_clock, }, .min_pll_rate = 600000000UL, #ifdef CONFIG_64BIT @@ -998,6 +1014,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs = { .pll_init = dsi_pll_7nm_init, .save_pll_state = dsi_7nm_pll_save_state, .restore_pll_state = dsi_7nm_pll_restore_state, + .set_continuous_clock = dsi_7nm_set_continuous_clock, }, .min_pll_rate = 1000000000UL, .max_pll_rate = 3500000000UL, -- 2.30.2

2 1

[BUG] dw-mipi-dsi-rockchip display corruption with dsi panel
by Peter Geis 10 Aug '21

10 Aug '21

Good Evening, I've been attempting to light off the feiyang fy07024di26a30d panel on the rockpro64. This is the official panel from the Pine64 store. I've confirmed it works with the downstream kernel on both the rk3399 and rk3566, but on the mainline driver the display is partially corrupted (see attached photo: [1]). As you can see, the left half of the display is fine, but the right half of the display is corrupted with the pixels smearing horizontally. I saw when the panel was added, some additional code was added to handle burst mode in the sun6_mipi_dsi driver [2]. I've seen that the dw-mipi-dsi driver appears to already support burst mode and I can't find anything out of place there. I also haven't had much success finding anything obviously different in the downstream driver vs the upstream driver that would explain this. Attached below is the in-progress dts changes for an example of how the panel is plugged in. I admit, I have little understanding of the mipi-dsi internal workings, so I'm reaching out to the experts on how to correct this. Thank you for your time, Peter Geis [1] https://photos.app.goo.gl/LBA9M2WcweGaEb4cA [2] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20181116163916.… diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 687a5afa5d2c..af55a30297ae 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -20,6 +20,13 @@ chosen { stdout-path = "serial2:1500000n8"; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 1000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <128>; + }; + clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -69,7 +76,7 @@ diy_led: led-1 { fan: pwm-fan { compatible = "pwm-fan"; - cooling-levels = <0 150 200 255>; + cooling-levels = <0 100 150 255>; #cooling-cells = <2>; fan-supply = <&vcc12v_dcin>; pwms = <&pwm1 0 50000 0>; @@ -220,6 +227,16 @@ vdd_log: vdd-log { regulator-max-microvolt = <1700000>; vin-supply = <&vcc5v0_sys>; }; + + avdd: avdd { + compatible = "regulator-fixed"; + regulator-name = "avdd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <11000000>; + regulator-max-microvolt = <11000000>; + vin-supply = <&vcc3v3_s0>; + }; }; &cpu_l0 { @@ -428,8 +445,8 @@ regulator-state-mem { vcc3v0_touch: LDO_REG2 { regulator-name = "vcc3v0_touch"; - regulator-always-on; - regulator-boot-on; +// regulator-always-on; +// regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { @@ -518,8 +535,8 @@ regulator-state-mem { vcc3v3_s0: SWITCH_REG2 { regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; +// regulator-always-on; +// regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -593,6 +610,19 @@ fusb0: typec-portc@22 { vbus-supply = <&vcc5v0_typec>; status = "okay"; }; + + touch: touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; +// touchscreen-inverted-x; +// touchscreen-inverted-y; + }; }; &i2s0 { @@ -628,6 +658,88 @@ &io_domains { gpio1830-supply = <&vcc_3v0>; }; +&mipi_dsi { + status = "okay"; + clock-master; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + mipi_panel: panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>; +// enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>; + width-mm = <154>; + height-mm = <86>; + rotation = <0>; + avdd-supply = <&avdd>; + dvdd-supply = <&vcc3v3_s0>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <50000000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <160>; + hback-porch = <160>; + hsync-len = <10>; + vback-porch = <23>; + vfront-porch = <12>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + de-active = <0>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + + port@1 { + reg = <1>; + + mipi1_in_panel: endpoint@1 { + remote-endpoint = <&mipi1_out_panel>; + }; + }; + }; + }; +}; + +&mipi_dsi1 { + status = "okay"; + + ports { + mipi1_out: port@1 { + reg = <1>; + + mipi1_out_panel: endpoint { + remote-endpoint = <&mipi1_in_panel>; + }; + }; + }; +}; + &pcie0 { ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; num-lanes = <4>;

2 2

[PATCH] drm/msm/dsi: add support for dsi test pattern generator
by Abhinav Kumar 10 Aug '21

10 Aug '21

During board bringups its useful to have a DSI test pattern generator to isolate a DPU vs a DSI issue and focus on the relevant hardware block. To facilitate this, add an API which triggers the DSI controller test pattern. The expected output is a rectangular checkered pattern. This has been validated on a single DSI video mode panel by calling it right after drm_panel_enable() which is also the ideal location to use this as the DSI host and the panel have been initialized by then. Further validation on dual DSI and command mode panel is pending. If there are any fix ups needed for those, it shall be applied on top of this change. Signed-off-by: Abhinav Kumar <abhinavk(a)codeaurora.org> --- drivers/gpu/drm/msm/dsi/dsi.h | 3 ++ drivers/gpu/drm/msm/dsi/dsi.xml.h | 9 ++++++ drivers/gpu/drm/msm/dsi/dsi_host.c | 53 +++++++++++++++++++++++++++++++++++ drivers/gpu/drm/msm/dsi/dsi_manager.c | 13 +++++++++ 4 files changed, 78 insertions(+) diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h index 9b8e9b0..663ccbd 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.h +++ b/drivers/gpu/drm/msm/dsi/dsi.h @@ -84,6 +84,7 @@ void msm_dsi_manager_setup_encoder(int id); int msm_dsi_manager_register(struct msm_dsi *msm_dsi); void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi); bool msm_dsi_manager_validate_current_config(u8 id); +void msm_dsi_manager_tpg_enable(void); /* msm dsi */ static inline bool msm_dsi_device_connected(struct msm_dsi *msm_dsi) @@ -148,6 +149,8 @@ int dsi_clk_init_6g_v2(struct msm_dsi_host *msm_host); int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host, bool is_dual_dsi); int dsi_calc_clk_rate_6g(struct msm_dsi_host *msm_host, bool is_dual_dsi); void msm_dsi_host_snapshot(struct msm_disp_state *disp_state, struct mipi_dsi_host *host); +void msm_dsi_host_test_pattern_en(struct mipi_dsi_host *host); + /* dsi phy */ struct msm_dsi_phy; struct msm_dsi_phy_shared_timings { diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h index eadbcc7..f7dcf49 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.xml.h +++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h @@ -624,6 +624,15 @@ static inline uint32_t DSI_RDBK_DATA_CTRL_COUNT(uint32_t val) #define REG_DSI_VERSION 0x000001f0 #define DSI_VERSION_MAJOR__MASK 0xff000000 #define DSI_VERSION_MAJOR__SHIFT 24 + +#define REG_DSI_TEST_PATTERN_GEN_VIDEO_INIT_VAL 0x00000160 +#define REG_DSI_TPG_MAIN_CONTROL 0x00000198 +#define REG_DSI_TPG_VIDEO_CONFIG 0x000001a0 +#define REG_DSI_TEST_PATTERN_GEN_CTRL 0x00000158 +#define REG_DSI_TEST_PATTERN_GEN_CMD_MDP_INIT_VAL0 0x00000168 +#define REG_DSI_TEST_PATTERN_GEN_CMD_STREAM0_TRIGGER 0x00000180 +#define REG_DSI_TPG_MAIN_CONTROL2 0x0000019c + static inline uint32_t DSI_VERSION_MAJOR(uint32_t val) { return ((val) << DSI_VERSION_MAJOR__SHIFT) & DSI_VERSION_MAJOR__MASK; diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index ed504fe..24d44b0 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -2495,3 +2495,56 @@ void msm_dsi_host_snapshot(struct msm_disp_state *disp_state, struct mipi_dsi_ho pm_runtime_put_sync(&msm_host->pdev->dev); } + +static void msm_dsi_host_video_test_pattern_setup(struct msm_dsi_host *msm_host) +{ + u32 reg; + + reg = dsi_read(msm_host, REG_DSI_TEST_PATTERN_GEN_CTRL); + + dsi_write(msm_host, REG_DSI_TEST_PATTERN_GEN_VIDEO_INIT_VAL, 0xff); + /* draw checkered rectangle pattern */ + dsi_write(msm_host, REG_DSI_TPG_MAIN_CONTROL, 0x100); + /* use 24-bit RGB test pttern */ + dsi_write(msm_host, REG_DSI_TPG_VIDEO_CONFIG, 0x5); + + reg |= (0x3 << 4); + dsi_write(msm_host, REG_DSI_TEST_PATTERN_GEN_CTRL, reg); + + DBG("Video test pattern setup done\n"); +} + +static void msm_dsi_host_cmd_test_pattern_setup(struct msm_dsi_host *msm_host) +{ + u32 reg; + + reg = dsi_read(msm_host, REG_DSI_TEST_PATTERN_GEN_CTRL); + + dsi_write(msm_host, REG_DSI_TEST_PATTERN_GEN_CMD_MDP_INIT_VAL0, 0xff); + + reg |= (0x3 << 0x8); + dsi_write(msm_host, REG_DSI_TEST_PATTERN_GEN_CTRL, reg); + /* draw checkered rectangle pattern */ + dsi_write(msm_host, REG_DSI_TPG_MAIN_CONTROL2, (0x1 << 0x7)); + DBG("Cmd test pattern setup done\n"); +} + +void msm_dsi_host_test_pattern_en(struct mipi_dsi_host *host) +{ + struct msm_dsi_host *msm_host = to_msm_dsi_host(host); + bool is_video_mode = !!(msm_host->mode_flags & MIPI_DSI_MODE_VIDEO); + u32 reg; + + if (is_video_mode) + msm_dsi_host_video_test_pattern_setup(msm_host); + else + msm_dsi_host_cmd_test_pattern_setup(msm_host); + + reg = dsi_read(msm_host, REG_DSI_TEST_PATTERN_GEN_CTRL); + /* enable the test pattern generator */ + dsi_write(msm_host, REG_DSI_TEST_PATTERN_GEN_CTRL, (reg | BIT(0))); + + /* for command mode need to trigger one frame from tpg */ + if (!is_video_mode) + dsi_write(msm_host, REG_DSI_TEST_PATTERN_GEN_CMD_STREAM0_TRIGGER, 0x1); +} diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index 4ebfedc..db80de6 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -441,6 +441,19 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) return; } +void msm_dsi_manager_tpg_enable(void) +{ + struct msm_dsi *m_dsi = dsi_mgr_get_dsi(DSI_0); + struct msm_dsi *s_dsi = dsi_mgr_get_dsi(DSI_1); + + /* if dual dsi, trigger tpg on master first then slave */ + if (m_dsi) { + msm_dsi_host_test_pattern_en(m_dsi->host); + if (IS_DUAL_DSI() && s_dsi) + msm_dsi_host_test_pattern_en(s_dsi->host); + } +} + static void dsi_mgr_bridge_enable(struct drm_bridge *bridge) { int id = dsi_mgr_bridge_get_id(bridge); -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

5 6

[PATCH v2 1/2] drm/msm/dsi: update dsi register header file for tpg
by Abhinav Kumar 10 Aug '21

10 Aug '21

Update the DSI controller header XML file to add registers and bitfields to support rectangular checkered pattern generator. Signed-off-by: Abhinav Kumar <abhinavk(a)codeaurora.org> --- drivers/gpu/drm/msm/dsi/dsi.xml.h | 94 +++++++++++++++++++++++++++++++-------- 1 file changed, 75 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h index eadbcc7..ae299b7 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.xml.h +++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h @@ -8,25 +8,8 @@ This file was generated by the rules-ng-ng headergen tool in this git repository git clone https://github.com/freedreno/envytools.git The rules-ng-ng source files this header was generated from are: -- /home/robclark/src/mesa/mesa/src/freedreno/registers/msm.xml ( 981 bytes, from 2021-06-05 21:37:42) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/freedreno_copyright.xml ( 1572 bytes, from 2021-02-18 16:45:44) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/mdp/mdp4.xml ( 20912 bytes, from 2021-02-18 16:45:44) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/mdp/mdp_common.xml ( 2849 bytes, from 2021-02-18 16:45:44) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/mdp/mdp5.xml ( 37461 bytes, from 2021-02-18 16:45:44) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/dsi.xml ( 15291 bytes, from 2021-06-15 22:36:13) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/dsi_phy_v2.xml ( 3236 bytes, from 2021-06-05 21:37:42) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/dsi_phy_28nm_8960.xml ( 4935 bytes, from 2021-05-21 19:18:08) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/dsi_phy_28nm.xml ( 7004 bytes, from 2021-05-21 19:18:08) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/dsi_phy_20nm.xml ( 3712 bytes, from 2021-05-21 19:18:08) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/dsi_phy_14nm.xml ( 5381 bytes, from 2021-05-21 19:18:08) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/dsi_phy_10nm.xml ( 4499 bytes, from 2021-05-21 19:18:08) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/dsi_phy_7nm.xml ( 10953 bytes, from 2021-05-21 19:18:08) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/dsi_phy_5nm.xml ( 10900 bytes, from 2021-05-21 19:18:08) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/sfpb.xml ( 602 bytes, from 2021-02-18 16:45:44) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/dsi/mmss_cc.xml ( 1686 bytes, from 2021-02-18 16:45:44) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/hdmi/qfprom.xml ( 600 bytes, from 2021-02-18 16:45:44) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/hdmi/hdmi.xml ( 41874 bytes, from 2021-02-18 16:45:44) -- /home/robclark/src/mesa/mesa/src/freedreno/registers/edp/edp.xml ( 10416 bytes, from 2021-02-18 16:45:44) +- /local/mnt2/workspace2/abhinav/mesa_tool/mesa/src/freedreno/registers/dsi/dsi.xml ( 17500 bytes, from 2021-07-22 02:35:56) +- /local/mnt2/workspace2/abhinav/mesa_tool/mesa/src/freedreno/registers/freedreno_copyright.xml ( 1572 bytes, from 2021-07-13 18:03:11) Copyright (C) 2013-2021 by the following authors: - Rob Clark <robdclark(a)gmail.com> (robclark) @@ -105,6 +88,32 @@ enum dsi_lane_swap { LANE_SWAP_3210 = 7, }; +enum video_config_bpp { + VIDEO_CONFIG_18BPP = 0, + VIDEO_CONFIG_24BPP = 1, +}; + +enum video_pattern_sel { + VID_PRBS = 0, + VID_INCREMENTAL = 1, + VID_FIXED = 2, + VID_MDSS_GENERAL_PATTERN = 3, +}; + +enum cmd_mdp_stream0_pattern_sel { + CMD_MDP_PRBS = 0, + CMD_MDP_INCREMENTAL = 1, + CMD_MDP_FIXED = 2, + CMD_MDP_MDSS_GENERAL_PATTERN = 3, +}; + +enum cmd_dma_pattern_sel { + CMD_DMA_PRBS = 0, + CMD_DMA_INCREMENTAL = 1, + CMD_DMA_FIXED = 2, + CMD_DMA_CUSTOM_PATTERN_DMA_FIFO = 3, +}; + #define DSI_IRQ_CMD_DMA_DONE 0x00000001 #define DSI_IRQ_MASK_CMD_DMA_DONE 0x00000002 #define DSI_IRQ_CMD_MDP_DONE 0x00000100 @@ -564,6 +573,53 @@ static inline uint32_t DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL(enum dsi_lane_swap val) #define REG_DSI_PHY_RESET 0x00000128 #define DSI_PHY_RESET_RESET 0x00000001 +#define REG_DSI_TEST_PATTERN_GEN_VIDEO_INIT_VAL 0x00000160 + +#define REG_DSI_TPG_MAIN_CONTROL 0x00000198 +#define DSI_TPG_MAIN_CONTROL_CHECKERED_RECTANGLE_PATTERN 0x00000100 + +#define REG_DSI_TPG_VIDEO_CONFIG 0x000001a0 +#define DSI_TPG_VIDEO_CONFIG_BPP__MASK 0x00000003 +#define DSI_TPG_VIDEO_CONFIG_BPP__SHIFT 0 +static inline uint32_t DSI_TPG_VIDEO_CONFIG_BPP(enum video_config_bpp val) +{ + return ((val) << DSI_TPG_VIDEO_CONFIG_BPP__SHIFT) & DSI_TPG_VIDEO_CONFIG_BPP__MASK; +} +#define DSI_TPG_VIDEO_CONFIG_RGB 0x00000004 + +#define REG_DSI_TEST_PATTERN_GEN_CTRL 0x00000158 +#define DSI_TEST_PATTERN_GEN_CTRL_CMD_DMA_PATTERN_SEL__MASK 0x00030000 +#define DSI_TEST_PATTERN_GEN_CTRL_CMD_DMA_PATTERN_SEL__SHIFT 16 +static inline uint32_t DSI_TEST_PATTERN_GEN_CTRL_CMD_DMA_PATTERN_SEL(enum cmd_dma_pattern_sel val) +{ + return ((val) << DSI_TEST_PATTERN_GEN_CTRL_CMD_DMA_PATTERN_SEL__SHIFT) & DSI_TEST_PATTERN_GEN_CTRL_CMD_DMA_PATTERN_SEL__MASK; +} +#define DSI_TEST_PATTERN_GEN_CTRL_CMD_MDP_STREAM0_PATTERN_SEL__MASK 0x00000300 +#define DSI_TEST_PATTERN_GEN_CTRL_CMD_MDP_STREAM0_PATTERN_SEL__SHIFT 8 +static inline uint32_t DSI_TEST_PATTERN_GEN_CTRL_CMD_MDP_STREAM0_PATTERN_SEL(enum cmd_mdp_stream0_pattern_sel val) +{ + return ((val) << DSI_TEST_PATTERN_GEN_CTRL_CMD_MDP_STREAM0_PATTERN_SEL__SHIFT) & DSI_TEST_PATTERN_GEN_CTRL_CMD_MDP_STREAM0_PATTERN_SEL__MASK; +} +#define DSI_TEST_PATTERN_GEN_CTRL_VIDEO_PATTERN_SEL__MASK 0x00000030 +#define DSI_TEST_PATTERN_GEN_CTRL_VIDEO_PATTERN_SEL__SHIFT 4 +static inline uint32_t DSI_TEST_PATTERN_GEN_CTRL_VIDEO_PATTERN_SEL(enum video_pattern_sel val) +{ + return ((val) << DSI_TEST_PATTERN_GEN_CTRL_VIDEO_PATTERN_SEL__SHIFT) & DSI_TEST_PATTERN_GEN_CTRL_VIDEO_PATTERN_SEL__MASK; +} +#define DSI_TEST_PATTERN_GEN_CTRL_TPG_DMA_FIFO_MODE 0x00000004 +#define DSI_TEST_PATTERN_GEN_CTRL_CMD_DMA_TPG_EN 0x00000002 +#define DSI_TEST_PATTERN_GEN_CTRL_EN 0x00000001 + +#define REG_DSI_TEST_PATTERN_GEN_CMD_MDP_INIT_VAL0 0x00000168 + +#define REG_DSI_TEST_PATTERN_GEN_CMD_STREAM0_TRIGGER 0x00000180 +#define DSI_TEST_PATTERN_GEN_CMD_STREAM0_TRIGGER_SW_TRIGGER 0x00000001 + +#define REG_DSI_TPG_MAIN_CONTROL2 0x0000019c +#define DSI_TPG_MAIN_CONTROL2_CMD_MDP0_CHECKERED_RECTANGLE_PATTERN 0x00000080 +#define DSI_TPG_MAIN_CONTROL2_CMD_MDP1_CHECKERED_RECTANGLE_PATTERN 0x00010000 +#define DSI_TPG_MAIN_CONTROL2_CMD_MDP2_CHECKERED_RECTANGLE_PATTERN 0x02000000 + #define REG_DSI_T_CLK_PRE_EXTEND 0x0000017c #define DSI_T_CLK_PRE_EXTEND_INC_BY_2_BYTECLK 0x00000001 -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

3 4

[Intel-gfx] [PATCH v2 0/3] drm/i915/hdcp: HDCP2.2 MST dock fixes
by Juston Li 10 Aug '21

10 Aug '21

Fixes to get HDCP2.2 over MST working on MST docking stations with certain behaviors that cause the current flow to fail. Tested with Dell WD-19 and Lenovo ThinkPad USB Type-C Dock Gen 2. These fixes should make the flow more robust to handle behaviors that as far as I can tell are unclear in the HDCP spec: RxInfo contains repeater topology information needed for MST. The behavior on these docks is that this can only be read during RepeaterAuth_Send_ReceiverID_List when the RxStatus READY bit is set otherwise the dock will return NACK. It seems these docks treat reading this range at any other time as invalid when the READY bit isn't set possibly because it could be stale. The HDCP spec also states the READY bit is cleared after RxInfo is read. These fixes address this behavior by only reading RxInfo once during the AKE flow and reusing that data. Changes since v1: - Fix subject line for 3/3 Juston Li (3): drm/i915/hdcp: update cp_irq_count_cached in intel_dp_hdcp2_read_msg() drm/i915/hdcp: read RxInfo once when reading RepeaterAuth_Send_ReceiverID_List drm/i915/hdcp: reuse rx_info for mst stream type1 capability check .../drm/i915/display/intel_display_types.h | 2 + drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 77 +++++-------------- drivers/gpu/drm/i915/display/intel_hdcp.c | 47 +++++------ include/drm/drm_dp_helper.h | 2 +- 4 files changed, 43 insertions(+), 85 deletions(-) -- 2.31.1

1 3

[Intel-gfx] [PATCH 0/3] drm/i915/hdcp: HDCP2.2 MST dock fixes
by Juston Li 10 Aug '21

10 Aug '21

Fixes to get HDCP2.2 over MST working on MST docking stations with certain behaviors that cause the current flow to fail. Tested with Dell WD-19 and Lenovo ThinkPad USB Type-C Dock Gen 2. These fixes should make the flow more robust to handle behaviors that as far as I can tell are unclear in the HDCP spec: RxInfo contains repeater topology information needed for MST. The behavior on these docks is that this can only be read during RepeaterAuth_Send_ReceiverID_List when the RxStatus READY bit is set otherwise the dock will return NACK. It seems these docks treat reading this range at any other time as invalid when the READY bit isn't set possibly because it could be stale. The HDCP spec also states the READY bit is cleared after RxInfo is read. These fixes address this behavior by only reading RxInfo once during the AKE flow and reusing that data. Juston Li (3): drm/i915/hdcp: update cp_irq_count_cached in intel_dp_hdcp2_read_msg() drm/i915/hdcp: read RxInfo once when reading RepeaterAuth_Send_ReceiverID_List drm/i915/hdcp: reuse rx_info for mst stream type1 capability check .../drm/i915/display/intel_display_types.h | 2 + drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 77 +++++-------------- drivers/gpu/drm/i915/display/intel_hdcp.c | 47 +++++------ include/drm/drm_dp_helper.h | 2 +- 4 files changed, 43 insertions(+), 85 deletions(-) -- 2.31.1

1 3

[PATCH 0/8] gpu/drm: ingenic-drm: Various improvements
by Paul Cercueil 10 Aug '21

10 Aug '21

Hi, This patchset rework the ingenic-drm driver, improving the code in various places. The most important change is the last patch, which updates the ingenic-drm driver to use a top-level bridge per output, making use of the bus format and flag negociation implemented in the bridge code. All the external bridges are now attached with DRM_BRIDGE_ATTACH_NO_CONNECTOR. Cheers, -Paul Paul Cercueil (8): drm/ingenic: Remove dead code drm/ingenic: Simplify code by using hwdescs array drm/ingenic: Use standard drm_atomic_helper_commit_tail drm/ingenic: Add support for private objects drm/ingenic: Move IPU scale settings to private state drm/ingenic: Set DMA descriptor chain register when starting CRTC drm/ingenic: Upload palette before frame drm/ingenic: Attach bridge chain to encoders drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 287 ++++++++++++++++------ drivers/gpu/drm/ingenic/ingenic-ipu.c | 127 ++++++++-- 2 files changed, 322 insertions(+), 92 deletions(-) -- 2.30.2

7 28

[PATCH v2] drm/msm/dp: add drm debug logs to dp_pm_resume/suspend
by Kuogee Hsieh 10 Aug '21

10 Aug '21

Changes in V2: -- correct Fixes text -- drop commit text Fixes: 601f0479c583 ("drm/msm/dp: add logs across DP driver for ease of debugging") Signed-off-by: Kuogee Hsieh <khsieh(a)codeaurora.org> --- drivers/gpu/drm/msm/dp/dp_display.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index 8a85613..870b926 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -1284,6 +1284,9 @@ static int dp_pm_resume(struct device *dev) mutex_lock(&dp->event_mutex); + DRM_DEBUG_DP("Before, core_inited=%d power_on=%d\n", + dp->core_initialized, dp_display->power_on); + /* start from disconnected state */ dp->hpd_state = ST_DISCONNECTED; @@ -1315,6 +1318,10 @@ static int dp_pm_resume(struct device *dev) else dp->dp_display.is_connected = false; + DRM_DEBUG_DP("After, sink_count=%d is_connected=%d core_inited=%d power_on=%d\n", + dp->link->sink_count, dp->dp_display.is_connected, + dp->core_initialized, dp_display->power_on); + mutex_unlock(&dp->event_mutex); return 0; @@ -1330,6 +1337,9 @@ static int dp_pm_suspend(struct device *dev) mutex_lock(&dp->event_mutex); + DRM_DEBUG_DP("Before, core_inited=%d power_on=%d\n", + dp->core_initialized, dp_display->power_on); + if (dp->core_initialized == true) { /* mainlink enabled */ if (dp_power_clk_status(dp->power, DP_CTRL_PM)) @@ -1343,6 +1353,9 @@ static int dp_pm_suspend(struct device *dev) /* host_init will be called at pm_resume */ dp->core_initialized = false; + DRM_DEBUG_DP("After, core_inited=%d power_on=%d\n", + dp->core_initialized, dp_display->power_on); + mutex_unlock(&dp->event_mutex); return 0; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

3 5

[PATCH] dma-buf: heaps: Set allocation limit for system heap
by Hridya Valsaraju 10 Aug '21

10 Aug '21

This patch limits the size of total memory that can be requested in a single allocation from the system heap. This would prevent a buggy/malicious client from depleting system memory by requesting for an extremely large allocation which might destabilize the system. The limit is set to half the size of the device's total RAM which is the same as what was set by the deprecated ION system heap. Signed-off-by: Hridya Valsaraju <hridya(a)google.com> --- drivers/dma-buf/heaps/system_heap.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/dma-buf/heaps/system_heap.c b/drivers/dma-buf/heaps/system_heap.c index b7fbce66bcc0..099f5a8304b4 100644 --- a/drivers/dma-buf/heaps/system_heap.c +++ b/drivers/dma-buf/heaps/system_heap.c @@ -371,6 +371,12 @@ static struct dma_buf *system_heap_do_allocate(struct dma_heap *heap, struct page *page, *tmp_page; int i, ret = -ENOMEM; + if (len / PAGE_SIZE > totalram_pages() / 2) { + pr_err("pid %d requested too large an allocation(size %lu) from system heap\n", + current->pid, len); + return ERR_PTR(ret); + } + buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); if (!buffer) return ERR_PTR(-ENOMEM); -- 2.32.0.432.gabb21c7263-goog

4 6

[PATCH 5.13 081/175] drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled
by Greg Kroah-Hartman 10 Aug '21

10 Aug '21

From: Randy Dunlap <rdunlap(a)infradead.org> commit 5706cb3c910cc8283f344bc37a889a8d523a2c6d upstream. 'pm_suspend_target_state' is only available when CONFIG_PM_SLEEP is set/enabled. OTOH, when both SUSPEND and HIBERNATION are not set, PM_SLEEP is not set, so this variable cannot be used. ../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: In function ‘amdgpu_acpi_is_s0ix_active’: ../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:1046:11: error: ‘pm_suspend_target_state’ undeclared (first use in this function); did you mean ‘__KSYM_pm_suspend_target_state’? return pm_suspend_target_state == PM_SUSPEND_TO_IDLE; ^~~~~~~~~~~~~~~~~~~~~~~ __KSYM_pm_suspend_target_state Also use shorter IS_ENABLED(CONFIG_foo) notation for checking the 2 config symbols. Fixes: 91e273712ab8dd ("drm/amdgpu: Check pmops for desired suspend state") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Alex Deucher <alexander.deucher(a)amd.com> Cc: Christian König <christian.koenig(a)amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan(a)amd.com> Cc: amd-gfx(a)lists.freedesktop.org Cc: dri-devel(a)lists.freedesktop.org Cc: linux-next(a)vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c @@ -904,7 +904,7 @@ void amdgpu_acpi_fini(struct amdgpu_devi */ bool amdgpu_acpi_is_s0ix_supported(struct amdgpu_device *adev) { -#if defined(CONFIG_AMD_PMC) || defined(CONFIG_AMD_PMC_MODULE) +#if IS_ENABLED(CONFIG_AMD_PMC) && IS_ENABLED(CONFIG_PM_SLEEP) if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0) { if (adev->flags & AMD_IS_APU) return pm_suspend_target_state == PM_SUSPEND_TO_IDLE;

1 0

← Newer
1
...
56
57
58
59
60
61
62
...
77
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

dri-devel August 2021