November 2022 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Nov 1 01:06:56 UTC 2022
Ending: Wed Nov 30 21:07:34 UTC 2022
Messages: 424

• ✗ Fi.CI.BAT: failure for tests/i915/i915_pm_backlight: Add new subtest to validate dual panel backlight (rev7)   Patchwork
• ✗ Fi.CI.DOCS: warning for Enable YCbCr420 for VDSC   Patchwork
• ✓ Fi.CI.BAT: success for Enable YCbCr420 for VDSC   Patchwork
• ✓ Fi.CI.IGT: success for Enable YCbCr420 for VDSC   Patchwork
• [PATCH i-g-t] Revert "runner: Disable socket communications for now"   Petri Latvala
• [i-g-t 1/2] Revert "tests/kms_cursor_legacy: Test Cleanup"   Bhanuprakash Modem
• [i-g-t 2/2] Revert "tests/kms_cursor_legacy: Convert tests to dynamic"   Bhanuprakash Modem
• ✗ GitLab.Pipeline: warning for Revert "runner: Disable socket communications for now"   Patchwork
• ✓ Fi.CI.BAT: success for Revert "runner: Disable socket communications for now"   Patchwork
• ✗ Fi.CI.BAT: failure for series starting with [1/2] Revert "tests/kms_cursor_legacy: Test Cleanup"   Patchwork
• [PATCH 1/2] drm/i915/display: Do both crawl and squash when changing cdclk   Anusha Srivatsa
• [PATCH 2/2] drm/i915/display: Add CDCLK Support for MTL   Anusha Srivatsa
• ✗ Fi.CI.IGT: failure for Revert "runner: Disable socket communications for now"   Patchwork
• ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915/display: Do both crawl and squash when changing cdclk   Patchwork
• ✓ Fi.CI.BAT: success for Enable Pipewriteback (rev13)   Patchwork
• [PATCH 00/23] DEPT DMA-FENCE test run for i915   Gwan-gyeong Mun
• [PATCH 01/23] llist: Move llist_{head,node} definition to types.h   Gwan-gyeong Mun
• [PATCH 02/23] dept: Implement Dept(Dependency Tracker)   Gwan-gyeong Mun
• [PATCH 03/23] dept: Apply Dept to spinlock   Gwan-gyeong Mun
• [PATCH 04/23] dept: Apply Dept to mutex families   Gwan-gyeong Mun
• [PATCH 05/23] dept: Apply Dept to rwlock   Gwan-gyeong Mun
• [PATCH 06/23] dept: Apply Dept to wait_for_completion()/complete()   Gwan-gyeong Mun
• [PATCH 07/23] dept: Apply Dept to seqcount APIs   Gwan-gyeong Mun
• [PATCH 08/23] dept: Apply Dept to rwsem   Gwan-gyeong Mun
• [PATCH 09/23] dept: Add proc knobs to show stats and dependency graph   Gwan-gyeong Mun
• [PATCH 10/23] dept: Introduce split map concept and new APIs for them   Gwan-gyeong Mun
• [PATCH 11/23] dept: Apply Dept to wait/event of PG_{locked, writeback}   Gwan-gyeong Mun
• [PATCH 12/23] dept: Apply SDT to swait   Gwan-gyeong Mun
• [PATCH 13/23] dept: Apply SDT to wait(waitqueue)   Gwan-gyeong Mun
• [PATCH 14/23] locking/lockdep, cpu/hotplus: Use a weaker annotation in AP thread   Gwan-gyeong Mun
• [PATCH 15/23] dept: Distinguish each syscall context from another   Gwan-gyeong Mun
• [PATCH 16/23] dept: Distinguish each work from another   Gwan-gyeong Mun
• [PATCH 17/23] dept: Disable Dept within the wait_bit layer by default   Gwan-gyeong Mun
• [PATCH 18/23] dept: Disable Dept on struct crypto_larval's completion for now   Gwan-gyeong Mun
• [PATCH 19/23] dept: Differentiate onstack maps from others of different tasks in class   Gwan-gyeong Mun
• [PATCH 20/23] dept: Distinguish between sleep wait and non-sleep wait   Gwan-gyeong Mun
• [PATCH 21/23] dept: Unstage wait when tagging a normal sleep wait   Gwan-gyeong Mun
• [PATCH 22/23] dept: Apply Dept to dma fence's default wait and wakeup   Gwan-gyeong Mun
• [PATCH 23/23] HAX: dept: Enable Dept by default   Gwan-gyeong Mun
• [PATCH i-g-t 1/2] runner: Use a bigger buffer for receiving test outputs   Petri Latvala
• [PATCH i-g-t 2/2] Revert "runner: Disable socket communications for now"   Petri Latvala
• ✗ Fi.CI.BAT: failure for series starting with [1/2] runner: Use a bigger buffer for receiving test outputs   Patchwork
• ✗ Fi.CI.IGT: failure for Enable Pipewriteback (rev13)   Patchwork
• ✗ Fi.CI.DOCS: warning for DEPT DMA-FENCE test run for i915   Patchwork
• ✗ Fi.CI.BAT: failure for DEPT DMA-FENCE test run for i915   Patchwork
• ✗ Fi.CI.IGT: failure for series starting with [1/2] runner: Use a bigger buffer for receiving test outputs   Patchwork
• ✗ Fi.CI.BAT: failure for DEPT DMA-FENCE test run for i915 (rev2)   Patchwork
• [PATCH 00/24] DEPT DMA-FENCE test run for i915   Gwan-gyeong Mun
• [PATCH 01/24] llist: Move llist_{head,node} definition to types.h   Gwan-gyeong Mun
• [PATCH 02/24] dept: Implement Dept(Dependency Tracker)   Gwan-gyeong Mun
• [PATCH 03/24] dept: Apply Dept to spinlock   Gwan-gyeong Mun
• [PATCH 04/24] dept: Apply Dept to mutex families   Gwan-gyeong Mun
• [PATCH 05/24] dept: Apply Dept to rwlock   Gwan-gyeong Mun
• [PATCH 06/24] dept: Apply Dept to wait_for_completion()/complete()   Gwan-gyeong Mun
• [PATCH 07/24] dept: Apply Dept to seqcount APIs   Gwan-gyeong Mun
• [PATCH 08/24] dept: Apply Dept to rwsem   Gwan-gyeong Mun
• [PATCH 09/24] dept: Add proc knobs to show stats and dependency graph   Gwan-gyeong Mun
• [PATCH 10/24] dept: Introduce split map concept and new APIs for them   Gwan-gyeong Mun
• [PATCH 11/24] dept: Apply Dept to wait/event of PG_{locked, writeback}   Gwan-gyeong Mun
• [PATCH 12/24] dept: Apply SDT to swait   Gwan-gyeong Mun
• [PATCH 13/24] dept: Apply SDT to wait(waitqueue)   Gwan-gyeong Mun
• [PATCH 14/24] locking/lockdep, cpu/hotplus: Use a weaker annotation in AP thread   Gwan-gyeong Mun
• [PATCH 15/24] dept: Distinguish each syscall context from another   Gwan-gyeong Mun
• [PATCH 16/24] dept: Distinguish each work from another   Gwan-gyeong Mun
• [PATCH 17/24] dept: Disable Dept within the wait_bit layer by default   Gwan-gyeong Mun
• [PATCH 18/24] dept: Disable Dept on struct crypto_larval's completion for now   Gwan-gyeong Mun
• [PATCH 19/24] dept: Differentiate onstack maps from others of different tasks in class   Gwan-gyeong Mun
• [PATCH 20/24] dept: Distinguish between sleep wait and non-sleep wait   Gwan-gyeong Mun
• [PATCH 21/24] dept: Unstage wait when tagging a normal sleep wait   Gwan-gyeong Mun
• [PATCH 22/24] dept: Apply Dept to dma fence's default wait and wakeup   Gwan-gyeong Mun
• [PATCH 23/24] HAX: dept: Enable Dept by default   Gwan-gyeong Mun
• [PATCH 24/24] HAX: dept: Increase DEPT_MAX_WAIT_HIST / DEPT_MAX_ECXT_HELD to track more   Gwan-gyeong Mun
• [PATCH 00/25] DEPT DMA-FENCE test run for i915   Gwan-gyeong Mun
• [PATCH 01/25] llist: Move llist_{head,node} definition to types.h   Gwan-gyeong Mun
• [PATCH 02/25] dept: Implement Dept(Dependency Tracker)   Gwan-gyeong Mun
• [PATCH 03/25] dept: Apply Dept to spinlock   Gwan-gyeong Mun
• [PATCH 04/25] dept: Apply Dept to mutex families   Gwan-gyeong Mun
• [PATCH 05/25] dept: Apply Dept to rwlock   Gwan-gyeong Mun
• [PATCH 06/25] dept: Apply Dept to wait_for_completion()/complete()   Gwan-gyeong Mun
• [PATCH 07/25] dept: Apply Dept to seqcount APIs   Gwan-gyeong Mun
• [PATCH 08/25] dept: Apply Dept to rwsem   Gwan-gyeong Mun
• [PATCH 09/25] dept: Add proc knobs to show stats and dependency graph   Gwan-gyeong Mun
• [PATCH 10/25] dept: Introduce split map concept and new APIs for them   Gwan-gyeong Mun
• [PATCH 11/25] dept: Apply Dept to wait/event of PG_{locked, writeback}   Gwan-gyeong Mun
• [PATCH 12/25] dept: Apply SDT to swait   Gwan-gyeong Mun
• [PATCH 13/25] dept: Apply SDT to wait(waitqueue)   Gwan-gyeong Mun
• [PATCH 14/25] locking/lockdep, cpu/hotplus: Use a weaker annotation in AP thread   Gwan-gyeong Mun
• [PATCH 15/25] dept: Distinguish each syscall context from another   Gwan-gyeong Mun
• [PATCH 16/25] dept: Distinguish each work from another   Gwan-gyeong Mun
• [PATCH 17/25] dept: Disable Dept within the wait_bit layer by default   Gwan-gyeong Mun
• [PATCH 18/25] dept: Disable Dept on struct crypto_larval's completion for now   Gwan-gyeong Mun
• [PATCH 19/25] dept: Differentiate onstack maps from others of different tasks in class   Gwan-gyeong Mun
• [PATCH 20/25] dept: Distinguish between sleep wait and non-sleep wait   Gwan-gyeong Mun
• [PATCH 21/25] dept: Unstage wait when tagging a normal sleep wait   Gwan-gyeong Mun
• [PATCH 22/25] dept: Apply Dept to dma fence's default wait and wakeup   Gwan-gyeong Mun
• [PATCH 23/25] HAX: dept: Enable Dept by default   Gwan-gyeong Mun
• [PATCH 24/25] HAX: dept: Increase DEPT_MAX_WAIT_HIST / DEPT_MAX_ECXT_HELD to track more   Gwan-gyeong Mun
• [PATCH 25/25] HAX: dept: Increase dept object size   Gwan-gyeong Mun
• ✗ Fi.CI.BAT: failure for DEPT DMA-FENCE test run for i915 (rev4)   Patchwork
• [PATCH 00/25] DEPT DMA-FENCE test run for i915   Gwan-gyeong Mun
• [PATCH 01/25] llist: Move llist_{head,node} definition to types.h   Gwan-gyeong Mun
• [PATCH 02/25] dept: Implement Dept(Dependency Tracker)   Gwan-gyeong Mun
• [PATCH 03/25] dept: Apply Dept to spinlock   Gwan-gyeong Mun
• [PATCH 04/25] dept: Apply Dept to mutex families   Gwan-gyeong Mun
• [PATCH 05/25] dept: Apply Dept to rwlock   Gwan-gyeong Mun
• [PATCH 06/25] dept: Apply Dept to wait_for_completion()/complete()   Gwan-gyeong Mun
• [PATCH 07/25] dept: Apply Dept to seqcount APIs   Gwan-gyeong Mun
• [PATCH 08/25] dept: Apply Dept to rwsem   Gwan-gyeong Mun
• [PATCH 09/25] dept: Add proc knobs to show stats and dependency graph   Gwan-gyeong Mun
• [PATCH 10/25] dept: Introduce split map concept and new APIs for them   Gwan-gyeong Mun
• [PATCH 11/25] dept: Apply Dept to wait/event of PG_{locked, writeback}   Gwan-gyeong Mun
• [PATCH 12/25] dept: Apply SDT to swait   Gwan-gyeong Mun
• [PATCH 13/25] dept: Apply SDT to wait(waitqueue)   Gwan-gyeong Mun
• [PATCH 14/25] locking/lockdep, cpu/hotplus: Use a weaker annotation in AP thread   Gwan-gyeong Mun
• [PATCH 15/25] dept: Distinguish each syscall context from another   Gwan-gyeong Mun
• [PATCH 16/25] dept: Distinguish each work from another   Gwan-gyeong Mun
• [PATCH 17/25] dept: Disable Dept within the wait_bit layer by default   Gwan-gyeong Mun
• [PATCH 18/25] dept: Disable Dept on struct crypto_larval's completion for now   Gwan-gyeong Mun
• [PATCH 19/25] dept: Differentiate onstack maps from others of different tasks in class   Gwan-gyeong Mun
• [PATCH 20/25] dept: Distinguish between sleep wait and non-sleep wait   Gwan-gyeong Mun
• [PATCH 21/25] dept: Unstage wait when tagging a normal sleep wait   Gwan-gyeong Mun
• [PATCH 22/25] dept: Apply Dept to dma fence's default wait and wakeup   Gwan-gyeong Mun
• [PATCH 23/25] HAX: dept: Enable Dept by default   Gwan-gyeong Mun
• [PATCH 24/25] HAX: dept: Increase DEPT_MAX_WAIT_HIST / DEPT_MAX_ECXT_HELD to track more   Gwan-gyeong Mun
• [PATCH 25/25] HAX: dept: Increase dept object size   Gwan-gyeong Mun
• [PATCH i-g-t 1/5] runner: Use a bigger buffer for receiving test outputs   Petri Latvala
• [PATCH i-g-t 2/5] igt_core: Split too long log lines when sending to runner with comms   Petri Latvala
• [PATCH i-g-t 3/5] runner: Continue using socket comms when getting an invalid packet   Petri Latvala
• [PATCH i-g-t 4/5] igt_core: Make sure test result gets to runner when test has no subtests   Petri Latvala
• [PATCH i-g-t 5/5] Revert "runner: Disable socket communications for now"   Petri Latvala
• ✓ Fi.CI.BAT: success for series starting with [1/5] runner: Use a bigger buffer for receiving test outputs   Patchwork
• [PATCH] HAX: Verify uncore->lock on all raw reads/writes   Matt Roper
• ✗ Fi.CI.BAT: failure for DEPT DMA-FENCE test run for i915 (rev5)   Patchwork
• ✗ Fi.CI.BAT: failure for HAX: Verify uncore->lock on all raw reads/writes   Patchwork
• [PATCH 00/25] DEPT DMA-FENCE test run for i915   Gwan-gyeong Mun
• [PATCH 01/25] llist: Move llist_{head,node} definition to types.h   Gwan-gyeong Mun
• [PATCH 02/25] dept: Implement Dept(Dependency Tracker)   Gwan-gyeong Mun
• [PATCH 03/25] dept: Apply Dept to spinlock   Gwan-gyeong Mun
• [PATCH 04/25] dept: Apply Dept to mutex families   Gwan-gyeong Mun
• [PATCH 05/25] dept: Apply Dept to rwlock   Gwan-gyeong Mun
• [PATCH 06/25] dept: Apply Dept to wait_for_completion()/complete()   Gwan-gyeong Mun
• [PATCH 07/25] dept: Apply Dept to seqcount APIs   Gwan-gyeong Mun
• [PATCH 08/25] dept: Apply Dept to rwsem   Gwan-gyeong Mun
• [PATCH 09/25] dept: Add proc knobs to show stats and dependency graph   Gwan-gyeong Mun
• [PATCH 10/25] dept: Introduce split map concept and new APIs for them   Gwan-gyeong Mun
• [PATCH 11/25] dept: Apply Dept to wait/event of PG_{locked, writeback}   Gwan-gyeong Mun
• [PATCH 12/25] dept: Apply SDT to swait   Gwan-gyeong Mun
• [PATCH 13/25] dept: Apply SDT to wait(waitqueue)   Gwan-gyeong Mun
• [PATCH 14/25] locking/lockdep, cpu/hotplus: Use a weaker annotation in AP thread   Gwan-gyeong Mun
• [PATCH 15/25] dept: Distinguish each syscall context from another   Gwan-gyeong Mun
• [PATCH 16/25] dept: Distinguish each work from another   Gwan-gyeong Mun
• [PATCH 17/25] dept: Disable Dept within the wait_bit layer by default   Gwan-gyeong Mun
• [PATCH 18/25] dept: Disable Dept on struct crypto_larval's completion for now   Gwan-gyeong Mun
• [PATCH 19/25] dept: Differentiate onstack maps from others of different tasks in class   Gwan-gyeong Mun
• [PATCH 20/25] dept: Distinguish between sleep wait and non-sleep wait   Gwan-gyeong Mun
• [PATCH 21/25] dept: Unstage wait when tagging a normal sleep wait   Gwan-gyeong Mun
• [PATCH 22/25] dept: Apply Dept to dma fence's default wait and wakeup   Gwan-gyeong Mun
• [PATCH 23/25] dept: Add a mechanism to refill the internal memory pools on running out   Gwan-gyeong Mun
• [PATCH 24/25] HAX: dept: Enable Dept by default   Gwan-gyeong Mun
• [PATCH 25/25] HAX: dept: Increase DEPT_MAX_WAIT_HIST / DEPT_MAX_ECXT_HELD to track more   Gwan-gyeong Mun
• [PATCH 1/4] drm/i915/panelreplay: dpcd register definition for panelreplay   Animesh Manna
• [PATCH 2/4] drm/i915/panelreplay: Added HAS_PANEL_REPLAY() macro   Animesh Manna
• [PATCH 3/4] drm/i915/panelreplay: Initializaton and compute config for panel replay   Animesh Manna
• [PATCH 4/4] drm/i915/panelreplay: enable/disable panel replay   Animesh Manna
• [PATCH 1/4] drm/i915: Wrap all access to i915_vma.node.start|size   Andi Shyti
• [PATCH 2/4] brute   Andi Shyti
• [PATCH 3/4] drm/i915: Introduce guard pages to i915_vma   Andi Shyti
• [PATCH 4/4] drm/i915: Refine VT-d scanout workaround   Andi Shyti
• ✗ Fi.CI.BAT: failure for DEPT DMA-FENCE test run for i915 (rev6)   Patchwork
• ✗ Fi.CI.DOCS: warning for series starting with [1/4] drm/i915/panelreplay: dpcd register definition for panelreplay   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [1/4] drm/i915/panelreplay: dpcd register definition for panelreplay   Patchwork
• ✗ Fi.CI.BAT: failure for series starting with [1/4] drm/i915: Wrap all access to i915_vma.node.start|size   Patchwork
• [TRYBOT] drm/i915/edid: convert DP, HDMI and LVDS to drm_edid   Jani Nikula
• ✓ Fi.CI.BAT: success for drm/i915/edid: convert DP, HDMI and LVDS to drm_edid   Patchwork
• ✗ Fi.CI.IGT: failure for series starting with [1/5] runner: Use a bigger buffer for receiving test outputs   Patchwork
• ✗ Fi.CI.IGT: failure for series starting with [1/4] drm/i915/panelreplay: dpcd register definition for panelreplay   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/edid: convert DP, HDMI and LVDS to drm_edid   Patchwork
• ✗ Fi.CI.DOCS: warning for Enable Pipewriteback (rev14)   Patchwork
• ✓ Fi.CI.BAT: success for Enable Pipewriteback (rev14)   Patchwork
• ✗ Fi.CI.IGT: failure for Enable Pipewriteback (rev14)   Patchwork
• [i-g-t] tests/kms_cursor_legacy: Fix incomplete runs due to dynamic tests   Bhanuprakash Modem
• ✗ Fi.CI.BAT: failure for tests/kms_cursor_legacy: Fix incomplete runs due to dynamic tests   Patchwork
• [PATCH 1/3] drm/i915: Wrap all access to i915_vma.node.start|size   Andi Shyti
• [PATCH 2/3] drm/i915: Introduce guard pages to i915_vma   Andi Shyti
• [PATCH 3/3] drm/i915: Refine VT-d scanout workaround   Andi Shyti
• ✓ Fi.CI.BAT: success for series starting with [1/3] drm/i915: Wrap all access to i915_vma.node.start|size   Patchwork
• ✓ Fi.CI.IGT: success for series starting with [1/3] drm/i915: Wrap all access to i915_vma.node.start|size   Patchwork
• [PATCH] Add some debug to psr2 code   Jouni Högander
• [PATCH 1/2] drm/i915: Remove gem and overlay frontbuffer tracking   Maarten Lankhorst
• [PATCH 2/2] drm/i915/display: Neuter frontbuffer tracking harder   Maarten Lankhorst
• [PATCH 1/2] drm/i915: Remove gem and overlay frontbuffer tracking   Maarten Lankhorst
• [PATCH 2/2] drm/i915/display: Neuter frontbuffer tracking harder   Maarten Lankhorst
• [PATCH 0/3] Fix timeout handling when retiring request   Janusz Krzysztofik
• [PATCH 1/3] drm/i915: Fix negative remaining time after retire requests   Janusz Krzysztofik
• [PATCH 2/3] drm/i915: Never return 0 on timeout when retiring requests   Janusz Krzysztofik
• [PATCH 3/3] drm/i915: Never return 0 if request wait succeeds   Janusz Krzysztofik
• [PATCH 0/2] hwmon/coretemp: Simplify platform device antics   Janusz Krzysztofik
• [PATCH 1/2] Revert "iommu: Remove iova cpu hotplugging flushing"   Janusz Krzysztofik
• [PATCH 2/2] hwmon/coretemp: Simplify platform device antics   Janusz Krzysztofik
• ✓ Fi.CI.BAT: success for Add some debug to psr2 code   Patchwork
• ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915: Remove gem and overlay frontbuffer tracking   Patchwork
• ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915: Remove gem and overlay frontbuffer tracking   Patchwork
• ✓ Fi.CI.BAT: success for Fix timeout handling when retiring request   Patchwork
• [PATCH i-g-t] runner: Use 'abort' as result if a test caused an abort   Petri Latvala
• ✗ Fi.CI.BAT: failure for hwmon/coretemp: Simplify platform device antics   Patchwork
• ✓ Fi.CI.BAT: success for runner: Use 'abort' as result if a test caused an abort   Patchwork
• [PATCH] Revert "iommu: Remove iova cpu hotplugging flushing"   Janusz Krzysztofik
• [PATCH i-g-t] runner: Use 'abort' as result if a test caused an abort   Petri Latvala
• ✗ Fi.CI.BAT: failure for Revert "iommu: Remove iova cpu hotplugging flushing"   Patchwork
• ✓ Fi.CI.BAT: success for runner: Use 'abort' as result if a test caused an abort (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for Add some debug to psr2 code   Patchwork
• ✗ Fi.CI.IGT: failure for Fix timeout handling when retiring request   Patchwork
• ✗ Fi.CI.IGT: failure for runner: Use 'abort' as result if a test caused an abort   Patchwork
• ✗ Fi.CI.IGT: failure for runner: Use 'abort' as result if a test caused an abort (rev2)   Patchwork
• [PATCH i-g-t 0/2] Test misplaced-blitter - CI only   Karolina Stolarek
• [PATCH i-g-t 1/2] tests/api_intel_bb: Run misplaced-blitter only with supported engines   Karolina Stolarek
• [PATCH i-g-t 2/2] HAX: Test misplaced_blitter only   Karolina Stolarek
• [PATCH i-g-t] runner: Use 'abort' as result if a test caused an abort   Petri Latvala
• ✗ Fi.CI.BAT: failure for Test misplaced-blitter - CI only   Patchwork
• ✓ Fi.CI.BAT: success for runner: Use 'abort' as result if a test caused an abort (rev3)   Patchwork
• [PATCH i-g-t] i915/sysfs_rc6: Exercise rc6 controls   Ashutosh Dixit
• ✗ Fi.CI.BUILD: failure for i915/sysfs_rc6: Exercise rc6 controls   Patchwork
• ✗ GitLab.Pipeline: warning for i915/sysfs_rc6: Exercise rc6 controls   Patchwork
• [PATCH i-g-t] i915/sysfs_rc6: Exercise rc6 controls   Ashutosh Dixit
• ✓ Fi.CI.BAT: success for i915/sysfs_rc6: Exercise rc6 controls (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for runner: Use 'abort' as result if a test caused an abort (rev3)   Patchwork
• ✓ Fi.CI.IGT: success for i915/sysfs_rc6: Exercise rc6 controls (rev2)   Patchwork
• [PATCH i-g-t] tests/kms_cursor_legacy: add check for flip done   Arun R Murthy
• ✓ Fi.CI.BAT: success for tests/kms_cursor_legacy: add check for flip done   Patchwork
• ✗ Fi.CI.IGT: failure for tests/kms_cursor_legacy: add check for flip done   Patchwork
• [PATCH 00/10] Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes   Ankit Nautiyal
• [PATCH 01/10] drm/i915/display: Add new member to configure PCON color conversion   Ankit Nautiyal
• [PATCH 02/10] drm/i915/display: Add new member in intel_dp to store ycbcr420 passthrough cap   Ankit Nautiyal
• [PATCH 03/10] drm/i915/dp: Replace intel_dp.dfp members with the new crtc_state sink_format   Ankit Nautiyal
• [PATCH 04/10] drm/i915/dp: Compute output format with/without DSC   Ankit Nautiyal
• [PATCH 05/10] drm/i915/display: Use sink_format instead of ycbcr420_output flag   Ankit Nautiyal
• [PATCH 06/10] drm/i915/display: Add helper function to check if sink_format is 420   Ankit Nautiyal
• [PATCH 07/10] drm/i915/dp: Avoid DSC with output_format YCBC420   Ankit Nautiyal
• [PATCH 08/10] drm/i915/dp: Handle BPP where HDMI2.1 DFP doesn't support DSC   Ankit Nautiyal
• [PATCH 09/10] drm/i915/dp: Fix FRL BW check for HDMI2.1 DFP   Ankit Nautiyal
• [PATCH 10/10] drm/i915/dp: Add a wrapper to check frl/tmds downstream constraints   Ankit Nautiyal
• ✓ Fi.CI.BAT: success for Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes (rev4)   Patchwork
• ✗ Fi.CI.IGT: failure for Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes (rev4)   Patchwork
• [PATCH 0/9] Add DSC fractional bpp support   Ankit Nautiyal
• [PATCH 1/9] drm/i915/dp: Check if force dsc bpc <= max requested bpc   Ankit Nautiyal
• [PATCH 2/9] drm/display/dp: Add helper function to get DSC bpp prescision   Ankit Nautiyal
• [PATCH 3/9] drm/i915/dp: Rename helpers to get DSC max pipe bpp and max output bpp   Ankit Nautiyal
• [PATCH 4/9] drm/i915/dp: Get optimal link config to have best compressed bpp   Ankit Nautiyal
• [PATCH 5/9] drm/i915/display: Store compressed bpp in U6.4 format   Ankit Nautiyal
• [PATCH 6/9] drm/i915/dsc/mtl: Add support for fractional bpp   Ankit Nautiyal
• [PATCH 7/9] drm/i915/dp: Iterate over output bpp with fractional step size   Ankit Nautiyal
• [PATCH 8/9] drm/i915/dsc: Add debugfs entry to validate DSC fractional bpp   Ankit Nautiyal
• [PATCH 9/9] drm/i915/dsc: Allow DSC only with fractional bpp when forced from debugfs   Ankit Nautiyal
• ✗ Fi.CI.BAT: failure for Add DSC fractional bpp support   Patchwork
• [PATCH i-g-t] tests/gem_ctx_freq: Try to repro GL #6786   Ashutosh Dixit
• ✓ Fi.CI.BAT: success for tests/gem_ctx_freq: Try to repro GL #6786   Patchwork
• ✗ Fi.CI.IGT: failure for tests/gem_ctx_freq: Try to repro GL #6786   Patchwork
• [PATCH 00/29] DEPT DMA-FENCE test run for i915   Gwan-gyeong Mun
• [PATCH 01/29] llist: Move llist_{head,node} definition to types.h   Gwan-gyeong Mun
• [PATCH 02/29] dept: Implement Dept(Dependency Tracker)   Gwan-gyeong Mun
• [PATCH 03/29] dept: Apply Dept to spinlock   Gwan-gyeong Mun
• [PATCH 04/29] dept: Apply Dept to mutex families   Gwan-gyeong Mun
• [PATCH 05/29] dept: Apply Dept to rwlock   Gwan-gyeong Mun
• [PATCH 06/29] dept: Apply Dept to wait_for_completion()/complete()   Gwan-gyeong Mun
• [PATCH 07/29] dept: Apply Dept to seqcount APIs   Gwan-gyeong Mun
• [PATCH 08/29] dept: Apply Dept to rwsem   Gwan-gyeong Mun
• [PATCH 09/29] dept: Add proc knobs to show stats and dependency graph   Gwan-gyeong Mun
• [PATCH 10/29] dept: Introduce split map concept and new APIs for them   Gwan-gyeong Mun
• [PATCH 11/29] dept: Apply Dept to wait/event of PG_{locked, writeback}   Gwan-gyeong Mun
• [PATCH 12/29] dept: Apply SDT to swait   Gwan-gyeong Mun
• [PATCH 13/29] dept: Apply SDT to wait(waitqueue)   Gwan-gyeong Mun
• [PATCH 14/29] locking/lockdep, cpu/hotplus: Use a weaker annotation in AP thread   Gwan-gyeong Mun
• [PATCH 15/29] dept: Distinguish each syscall context from another   Gwan-gyeong Mun
• [PATCH 16/29] dept: Distinguish each work from another   Gwan-gyeong Mun
• [PATCH 17/29] dept: Disable Dept within the wait_bit layer by default   Gwan-gyeong Mun
• [PATCH 18/29] dept: Disable Dept on struct crypto_larval's completion for now   Gwan-gyeong Mun
• [PATCH 19/29] dept: Differentiate onstack maps from others of different tasks in class   Gwan-gyeong Mun
• [PATCH 20/29] dept: Distinguish between sleep wait and non-sleep wait   Gwan-gyeong Mun
• [PATCH 21/29] dept: Unstage wait when tagging a normal sleep wait   Gwan-gyeong Mun
• [PATCH 22/29] dept: Apply Dept to dma fence's default wait and wakeup   Gwan-gyeong Mun
• [PATCH 23/29] dept: Add a mechanism to refill the internal memory pools on running out   Gwan-gyeong Mun
• [PATCH 24/29] jbd2: Disable Dept on journal->j_trans_commit_map   Gwan-gyeong Mun
• [PATCH 25/29] dept: Track timeout waits separately with a new Kconfig   Gwan-gyeong Mun
• [PATCH 26/29] dept: Apply timeout consideration to wait_for_completion()/complete()   Gwan-gyeong Mun
• [PATCH 27/29] dept: Apply timeout consideration to swait APIs   Gwan-gyeong Mun
• [PATCH 28/29] HAX: dept: Enable Dept by default   Gwan-gyeong Mun
• [PATCH 29/29] HAX: dept: Increase DEPT_MAX_WAIT_HIST / DEPT_MAX_ECXT_HELD to track more   Gwan-gyeong Mun
• ✗ Fi.CI.BAT: failure for DEPT DMA-FENCE test run for i915 (rev7)   Patchwork
• [PATCH 00/30] DEPT DMA-FENCE test run for i915   Gwan-gyeong Mun
• [PATCH 01/30] llist: Move llist_{head,node} definition to types.h   Gwan-gyeong Mun
• [PATCH 02/30] dept: Implement Dept(Dependency Tracker)   Gwan-gyeong Mun
• [PATCH 03/30] dept: Apply Dept to spinlock   Gwan-gyeong Mun
• [PATCH 04/30] dept: Apply Dept to mutex families   Gwan-gyeong Mun
• [PATCH 05/30] dept: Apply Dept to rwlock   Gwan-gyeong Mun
• [PATCH 06/30] dept: Apply Dept to wait_for_completion()/complete()   Gwan-gyeong Mun
• [PATCH 07/30] dept: Apply Dept to seqcount APIs   Gwan-gyeong Mun
• [PATCH 08/30] dept: Apply Dept to rwsem   Gwan-gyeong Mun
• [PATCH 09/30] dept: Add proc knobs to show stats and dependency graph   Gwan-gyeong Mun
• [PATCH 10/30] dept: Introduce split map concept and new APIs for them   Gwan-gyeong Mun
• [PATCH 11/30] dept: Apply Dept to wait/event of PG_{locked, writeback}   Gwan-gyeong Mun
• [PATCH 12/30] dept: Apply SDT to swait   Gwan-gyeong Mun
• [PATCH 13/30] dept: Apply SDT to wait(waitqueue)   Gwan-gyeong Mun
• [PATCH 14/30] locking/lockdep, cpu/hotplus: Use a weaker annotation in AP thread   Gwan-gyeong Mun
• [PATCH 15/30] dept: Distinguish each syscall context from another   Gwan-gyeong Mun
• [PATCH 16/30] dept: Distinguish each work from another   Gwan-gyeong Mun
• [PATCH 17/30] dept: Disable Dept within the wait_bit layer by default   Gwan-gyeong Mun
• [PATCH 18/30] dept: Disable Dept on struct crypto_larval's completion for now   Gwan-gyeong Mun
• [PATCH 19/30] dept: Differentiate onstack maps from others of different tasks in class   Gwan-gyeong Mun
• [PATCH 20/30] dept: Distinguish between sleep wait and non-sleep wait   Gwan-gyeong Mun
• [PATCH 21/30] dept: Unstage wait when tagging a normal sleep wait   Gwan-gyeong Mun
• [PATCH 22/30] dept: Apply Dept to dma fence's default wait and wakeup   Gwan-gyeong Mun
• [PATCH 23/30] dept: Add a mechanism to refill the internal memory pools on running out   Gwan-gyeong Mun
• [PATCH 24/30] jbd2: Disable Dept on journal->j_trans_commit_map   Gwan-gyeong Mun
• [PATCH 25/30] dept: Track timeout waits separately with a new Kconfig   Gwan-gyeong Mun
• [PATCH 26/30] dept: Apply timeout consideration to wait_for_completion()/complete()   Gwan-gyeong Mun
• [PATCH 27/30] dept: Apply timeout consideration to swait APIs   Gwan-gyeong Mun
• [PATCH 28/30] HAX: dept: Enable Dept by default   Gwan-gyeong Mun
• [PATCH 29/30] HAX: dept: Increase DEPT_MAX_WAIT_HIST / DEPT_MAX_ECXT_HELD to track more   Gwan-gyeong Mun
• [PATCH 30/30] HAX: dept: Make dept report as WARN   Gwan-gyeong Mun
• [PATCH 00/10] Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes   Ankit Nautiyal
• [PATCH 01/10] drm/i915/display: Add new member to configure PCON color conversion   Ankit Nautiyal
• [PATCH 02/10] drm/i915/display: Add new member in intel_dp to store ycbcr420 passthrough cap   Ankit Nautiyal
• [PATCH 03/10] drm/i915/dp: Replace intel_dp.dfp members with the new crtc_state sink_format   Ankit Nautiyal
• [PATCH 04/10] drm/i915/dp: Compute output format with/without DSC   Ankit Nautiyal
• [PATCH 05/10] drm/i915/display: Use sink_format instead of ycbcr420_output flag   Ankit Nautiyal
• [PATCH 06/10] drm/i915/display: Add helper function to check if sink_format is 420   Ankit Nautiyal
• [PATCH 07/10] drm/i915/dp: Avoid DSC with output_format YCBC420   Ankit Nautiyal
• [PATCH 08/10] drm/i915/dp: Handle BPP where HDMI2.1 DFP doesn't support DSC   Ankit Nautiyal
• [PATCH 09/10] drm/i915/dp: Fix FRL BW check for HDMI2.1 DFP   Ankit Nautiyal
• [PATCH 10/10] drm/i915/dp: Add a wrapper to check frl/tmds downstream constraints   Ankit Nautiyal
• ✗ Fi.CI.BUILD: failure for Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes (rev5)   Patchwork
• ✗ Fi.CI.BAT: failure for DEPT DMA-FENCE test run for i915 (rev9)   Patchwork
• [PATCH] drm/i915/display: A check on mode->clock, if it exceeds max_dot_clock   Nischal Varide
• [PATCH 1/2] drm/i915/migrate: Account for the reserved_space   Matthew Auld
• [PATCH 2/2] drm/i915/selftests: exercise emit_pte() with nearly full ring   Matthew Auld
• [PATCH 0/9] Add DSC fractional bpp support   Ankit Nautiyal
• [PATCH 1/9] drm/i915/dp: Check if force dsc bpc <= max requested bpc   Ankit Nautiyal
• [PATCH 2/9] drm/display/dp: Add helper function to get DSC bpp prescision   Ankit Nautiyal
• [PATCH 3/9] drm/i915/dp: Rename helpers to get DSC max pipe bpp and max output bpp   Ankit Nautiyal
• [PATCH 4/9] drm/i915/dp: Get optimal link config to have best compressed bpp   Ankit Nautiyal
• [PATCH 5/9] drm/i915/display: Store compressed bpp in U6.4 format   Ankit Nautiyal
• [PATCH 6/9] drm/i915/dsc/mtl: Add support for fractional bpp   Ankit Nautiyal
• [PATCH 7/9] drm/i915/dp: Iterate over output bpp with fractional step size   Ankit Nautiyal
• [PATCH 8/9] drm/i915/dsc: Add debugfs entry to validate DSC fractional bpp   Ankit Nautiyal
• [PATCH 9/9] drm/i915/dsc: Allow DSC only with fractional bpp when forced from debugfs   Ankit Nautiyal
• [RFC PATCH] drm/i915: Never return active fence as previous last active   Janusz Krzysztofik
• ✓ Fi.CI.BAT: success for drm/i915/display: A check on mode->clock, if it exceeds max_dot_clock   Patchwork
• ✗ Fi.CI.DOCS: warning for series starting with [1/2] drm/i915/migrate: Account for the reserved_space   Patchwork
• ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915/migrate: Account for the reserved_space   Patchwork
• ✓ Fi.CI.BAT: success for Add DSC fractional bpp support (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915: Never return active fence as previous last active   Patchwork
• [PATCH 1/2] drm/i915/migrate: Account for the reserved_space   Matthew Auld
• [PATCH 2/2] drm/i915/selftests: exercise emit_pte() with nearly full ring   Matthew Auld
• ✗ Fi.CI.IGT: failure for drm/i915/display: A check on mode->clock, if it exceeds max_dot_clock   Patchwork
• ✗ Fi.CI.IGT: failure for Add DSC fractional bpp support (rev2)   Patchwork
• [PATCH] drm/i915: improve the catch-all evict to handle lock contention   Matthew Auld
• [PATCH v2 0/3] drm/i915/pxp: Add missing cleanup steps for PXP global-teardown   Alan Previn
• [PATCH v2 1/3] drm/i915/pxp: Invalidate all PXP fw sessions during teardown   Alan Previn
• [PATCH v2 2/3] drm/i915/pxp: Trigger the global teardown for before suspending   Alan Previn
• [PATCH v2 3/3] drm/i915/pxp: Pxp hw init should be in resume_complete   Alan Previn
• ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915/migrate: Account for the reserved_space   Patchwork
• ✗ Fi.CI.DOCS: warning for drm/i915: improve the catch-all evict to handle lock contention   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915: improve the catch-all evict to handle lock contention   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/pxp: Add missing cleanup steps for PXP global-teardown   Patchwork
• [PATCH 1/3] drm/i915/migrate: Account for the reserved_space   Matthew Auld
• [PATCH 2/3] drm/i915/selftests: use live_subtests for live_migrate   Matthew Auld
• [PATCH 3/3] drm/i915/selftests: exercise emit_pte() with nearly full ring   Matthew Auld
• ✗ Fi.CI.DOCS: warning for series starting with [1/3] drm/i915/migrate: Account for the reserved_space   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [1/3] drm/i915/migrate: Account for the reserved_space   Patchwork
• [PATCH 00/11] Add DSC fractional bpp support   Ankit Nautiyal
• [PATCH 01/11] drm/i915/dp: Check if force dsc bpc <= max requested bpc   Ankit Nautiyal
• [PATCH 02/11] drm/display/dp: Add helper function to get DSC bpp prescision   Ankit Nautiyal
• [PATCH 03/11] drm/i915/dp: Rename helpers to get DSC max pipe bpp and max output bpp   Ankit Nautiyal
• [PATCH 04/11] drm/i915/dp: Get optimal link config to have best compressed bpp   Ankit Nautiyal
• [PATCH 05/11] drm/i915/display: Store compressed bpp in U6.4 format   Ankit Nautiyal
• [PATCH 06/11] drm/i915/display: Consider fractional vdsc bpp while computing m_n values   Ankit Nautiyal
• [PATCH 07/11] drm/i915/audio : Consider fractional vdsc bpp while computing tu_data   Ankit Nautiyal
• [PATCH 08/11] drm/i915/dsc/mtl: Add support for fractional bpp   Ankit Nautiyal
• [PATCH 09/11] drm/i915/dp: Iterate over output bpp with fractional step size   Ankit Nautiyal
• [PATCH 10/11] drm/i915/dsc: Add debugfs entry to validate DSC fractional bpp   Ankit Nautiyal
• [PATCH 11/11] drm/i915/dsc: Allow DSC only with fractional bpp when forced from debugfs   Ankit Nautiyal
• [PATCH i-g-t] lib/mtl: Add Meteorlake platform definition   Jouni Högander
• [PATCH] drm/i915/psr: Use continuous full frame update instead of single   Jouni Högander
• ✓ Fi.CI.BAT: success for lib/mtl: Add Meteorlake platform definition   Patchwork
• ✓ Fi.CI.BAT: success for Add DSC fractional bpp support (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/psr: Use continuous full frame update instead of single   Patchwork
• [PATCH 0/2] Wait for DDI_BUF_CTL Active fixes   Ankit Nautiyal
• [PATCH 1/2] drm/i915/ddi: Wait for DDI_BUF_CTL to be active for HDMI   Ankit Nautiyal
• [PATCH 2/2] drm/i915/ddi: Fix timeout for DDI_BUF_CTL active for TC phy   Ankit Nautiyal
• [PATCH 0/2] Wait for DDI_BUF_CTL Active fixes   Ankit Nautiyal
• [PATCH 1/2] drm/i915/ddi: Fix timeout for DDI_BUF_CTL active for TC phy   Ankit Nautiyal
• [PATCH 2/2] drm/i915/ddi: Wait for DDI_BUF_CTL to be active for HDMI   Ankit Nautiyal
• ✓ Fi.CI.BAT: success for Wait for DDI_BUF_CTL Active fixes (rev2)   Patchwork
• [i-g-t] tests/kms_vrr: Fix the usage of VRR max refresh rate   Bhanuprakash Modem
• ✓ Fi.CI.BAT: success for tests/kms_vrr: Fix the usage of VRR max refresh rate   Patchwork
• ✓ Fi.CI.IGT: success for tests/kms_vrr: Fix the usage of VRR max refresh rate   Patchwork
• [PATCH] drm/i915: improve the catch-all evict to handle lock contention   Matthew Auld
• ✓ Fi.CI.BAT: success for drm/i915: improve the catch-all evict to handle lock contention (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: improve the catch-all evict to handle lock contention (rev2)   Patchwork
• [PATCH 00/14] Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes   Ankit Nautiyal
• [PATCH 01/14] drm/i915/display: Add new member to configure PCON color conversion   Ankit Nautiyal
• [PATCH 02/14] drm/i915/display: Add new member in intel_dp to store ycbcr420 passthrough cap   Ankit Nautiyal
• [PATCH 03/14] drm/i915/dp: Add Scaler constraint for YCbCr420 output   Ankit Nautiyal
• [PATCH 04/14] drm/i915/dp: Replace intel_dp.dfp members with the new crtc_state sink_format   Ankit Nautiyal
• [PATCH 05/14] drm/i915/dp: Compute output format with/without DSC   Ankit Nautiyal
• [PATCH 06/14] drm/i915/display: Use sink_format instead of ycbcr420_output flag   Ankit Nautiyal
• [PATCH 07/14] drm/i915/dp: Rearrange check for illegal mode and comments in mode_valid   Ankit Nautiyal
• [PATCH 08/14] drm/i915/dp: Consider output_format while computing dsc bpp for mode_valid   Ankit Nautiyal
• [PATCH 09/14] drm/i915/dp: Check if mode can be supported with dsc compressed bpp   Ankit Nautiyal
• [PATCH 10/14] drm/i915/display: Add helper function to check if sink_format is 420   Ankit Nautiyal
• [PATCH 11/14] drm/i915/dp: Avoid DSC with output_format YCBCR420   Ankit Nautiyal
• [PATCH 12/14] drm/i915/dp: Handle BPP where HDMI2.1 DFP doesn't support DSC   Ankit Nautiyal
• [PATCH 13/14] drm/i915/dp: Fix FRL BW check for HDMI2.1 DFP   Ankit Nautiyal
• [PATCH 14/14] drm/i915/dp: Add a wrapper to check frl/tmds downstream constraints   Ankit Nautiyal
• ✓ Fi.CI.BAT: success for Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes (rev6)   Patchwork
• [PATCH] drm/i915: improve the catch-all evict to handle lock contention   Matthew Auld
• [PATCH] drm/i915/dp: Change aux_ctl reg read to polling read   Arun R Murthy
• ✓ Fi.CI.BAT: success for drm/i915: improve the catch-all evict to handle lock contention (rev3)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/dp: Change aux_ctl reg read to polling read   Patchwork
• ✓ Fi.CI.IGT: success for Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes (rev6)   Patchwork
• ✗ Fi.CI.DOCS: warning for Async on Linear buffer (rev6)   Patchwork
• [PATCH 1/2] drm/i915: Remove gem and overlay frontbuffer tracking   Maarten Lankhorst
• [PATCH 2/2] drm/i915/display: Neuter frontbuffer tracking harder   Maarten Lankhorst
• ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915: Remove gem and overlay frontbuffer tracking   Patchwork

Last message date: Wed Nov 30 21:07:34 UTC 2022
Archived on: Wed Nov 30 21:07:36 UTC 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...