[Intel-gfx] [PATCH 09/37] drm/i915: add definitions for DDI_BUF_CTL registers
Eugeni Dodonov
eugeni.dodonov at intel.com
Thu Mar 22 02:09:44 CET 2012
There is one instance of those registers for each DDI port.
Signed-off-by: Eugeni Dodonov <eugeni.dodonov at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3831fe7..2927460 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3914,4 +3914,27 @@
#define DP_TP_STATUS_E 0x64444
#define DP_TP_STATUS_AUTOTRAIN_DONE (1<<12)
+/* DDI Buffer Control */
+#define DDI_BUF_CTL_A 0x64000
+#define DDI_BUF_CTL_B 0x64100
+#define DDI_BUF_CTL_C 0x64200
+#define DDI_BUF_CTL_D 0x64300
+#define DDI_BUF_CTL_E 0x64400
+#define DDI_BUF_CTL_ENABLE (1<<31)
+#define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */
+#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */
+#define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */
+#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */
+#define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */
+#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */
+#define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */
+#define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */
+#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */
+#define DDI_BUF_EMP_MASK (0xf<<24)
+#define DDI_BUF_IS_IDLE (1<<7)
+#define DDI_PORT_WIDTH_X1 (0<<1)
+#define DDI_PORT_WIDTH_X2 (1<<1)
+#define DDI_PORT_WIDTH_X4 (3<<1)
+#define DDI_INIT_DISPLAY_DETECTED (1<<0)
+
#endif /* _I915_REG_H_ */
--
1.7.9.2
More information about the Intel-gfx
mailing list