April 2024 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Apr 3 13:19:54 UTC 2024
Ending: Mon Apr 29 16:22:26 UTC 2024
Messages: 130

• [PATCH 0/3] Avoid unwanted lspcon init and probe warnings   Ankit Nautiyal
  • [PATCH 1/3] drm/i915/lspcon: Separate out function to get expected mode   Ankit Nautiyal
  • [PATCH 2/3] drm/i915/lspcon: Separate out function to set pcon mode   Ankit Nautiyal
  • [PATCH 3/3] drm/915/lspcon: Reduce dmesg errors during lspcon_init failure   Ankit Nautiyal
• [PATCH] iommu/vt-d: Fix WARN_ON in iommu probe path   Vinod Govindapillai
  • ✓ Fi.CI.BAT: success for iommu/vt-d: Fix WARN_ON in iommu probe path   Patchwork
  • ✗ Fi.CI.IGT: failure for iommu/vt-d: Fix WARN_ON in iommu probe path   Patchwork
• [PATCH] drm/i915/dg2: wait for HuC load completion before running selftests   Daniele Ceraolo Spurio
  • ✓ Fi.CI.BAT: success for drm/i915/dg2: wait for HuC load completion before running selftests   Patchwork
  • ✗ Fi.CI.IGT: failure for drm/i915/dg2: wait for HuC load completion before running selftests   Patchwork
• [PATCH] mei: pxp: match against PCI_CLASS_DISPLAY_OTHER   Daniele Ceraolo Spurio
  • ✓ Fi.CI.BAT: success for mei: pxp: match against PCI_CLASS_DISPLAY_OTHER   Patchwork
  • ✗ Fi.CI.IGT: failure for mei: pxp: match against PCI_CLASS_DISPLAY_OTHER   Patchwork
• [PATCH] drm/i915/psr: Increase fast wake sync pulse count   Jouni Högander
  • ✗ Fi.CI.BAT: failure for drm/i915/psr: Increase fast wake sync pulse count   Patchwork
• [PATCH i-g-t 0/2] Add mmap ptr draw method   Vandita Kulkarni
  • [PATCH i-g-t 1/2] lib/igt_draw: Add support for writing onto already mmapped buffer   Vandita Kulkarni
  • [PATCH i-g-t 2/2] tests/kms_async_flips: Reuse the already mmapped buffer   Vandita Kulkarni
  • ✗ Fi.CI.BAT: failure for Add mmap ptr draw method   Patchwork
  • [PATCH i-g-t 0/2] Add mmap ptr draw method   Vandita Kulkarni
    • [PATCH i-g-t 1/2] lib/igt_draw: Add support for writing onto already mmapped buffer   Vandita Kulkarni
    • [PATCH i-g-t 2/2] tests/kms_async_flips: Reuse the already mmapped buffer   Vandita Kulkarni
    • ✗ Fi.CI.BAT: failure for Add mmap ptr draw method (rev2)   Patchwork
• [v2 0/2] Add mmap ptr draw method   Vandita Kulkarni
  • ✗ Fi.CI.BUILD: failure for Add mmap ptr draw method   Patchwork
• [v2 1/2] lib/igt_draw: Add support for writing onto already mmapped buffer   Vandita Kulkarni
• [v2 2/2] tests/kms_async_flips: Reuse the already mmapped buffer   Vandita Kulkarni
• [v2 0/2] Add mmap ptr draw method to reuse   Vandita Kulkarni
  • [v2 1/2] lib/igt_draw: Add support for writing onto already mmapped buffer   Vandita Kulkarni
  • [v2 2/2] tests/kms_async_flips: Reuse the already mmapped buffer   Vandita Kulkarni
  • ✗ Fi.CI.BUILD: failure for Add mmap ptr draw method to reuse   Patchwork
• [PATCH 0/2] Dont use VTOTAL register when using VRR   Ankit Nautiyal
  • ✗ Fi.CI.BAT: failure for Dont use VTOTAL register when using VRR   Patchwork
• [PATCH 1/2] drm/i915/display: Get VRR compute config before get_transcoder_timing   Ankit Nautiyal
• [PATCH 2/2] drm/i915/vrr: Avoid reading/writing VTOTAL when vrr is enabled   Ankit Nautiyal
• [PATCH 0/4] Move towards using VRR timing generator for VRR   Ankit Nautiyal
  • [PATCH 1/4] drm/i915/dp: fix the Adaptive sync Operation mode for SDP   Ankit Nautiyal
  • [PATCH 2/4] drm/i915/display: Get VRR compute config before get_transcoder_timing   Ankit Nautiyal
  • [PATCH 3/4] drm/i915/vrr: Avoid reading/writing VTOTAL when vrr is enabled   Ankit Nautiyal
  • [PATCH 4/4] drm/i915/vrr/xe2lpd: Use VRR timing generator whenever panel supports VRR   Ankit Nautiyal
  • ✗ Fi.CI.BAT: failure for Move towards using VRR timing generator for VRR   Patchwork
  • [PATCH 0/4] Move towards using VRR timing generator for VRR   Ankit Nautiyal
    • [PATCH 1/4] drm/i915/dp: fix the Adaptive sync Operation mode for SDP   Ankit Nautiyal
    • [PATCH 2/4] drm/i915/display: Get VRR compute config before get_transcoder_timing   Ankit Nautiyal
    • [PATCH 3/4] drm/i915/vrr: Avoid reading/writing VTOTAL when vrr is enabled   Ankit Nautiyal
    • [PATCH 4/4] drm/i915/vrr/xe2lpd: Use VRR timing generator whenever panel supports VRR   Ankit Nautiyal
    • ✗ Fi.CI.BAT: failure for Move towards using VRR timing generator for VRR (rev2)   Patchwork
  • [PATCH 0/4] Move towards using VRR timing generator for VRR   Ankit Nautiyal
    • [PATCH 1/4] drm/i915/dp: fix the Adaptive sync Operation mode for SDP   Ankit Nautiyal
    • [PATCH 2/4] drm/i915/display: Get VRR compute config before get_transcoder_timing   Ankit Nautiyal
    • [PATCH 3/4] drm/i915/vrr: Avoid reading/writing VTOTAL/VBLANK/VSYNC when vrr is enabled   Ankit Nautiyal
    • [PATCH 4/4] drm/i915/vrr/xe2lpd: Use VRR timing generator whenever panel supports VRR   Ankit Nautiyal
    • ✓ Fi.CI.BAT: success for Move towards using VRR timing generator for VRR (rev3)   Patchwork
    • ✗ Fi.CI.IGT: failure for Move towards using VRR timing generator for VRR (rev3)   Patchwork
• [PATCH] drm/i915: Fix intel_runtime_pm_get_noresume() wakeref assert   Imre Deak
  • ✓ Fi.CI.BAT: success for drm/i915: Fix intel_runtime_pm_get_noresume() wakeref assert   Patchwork
  • ✗ Fi.CI.IGT: failure for drm/i915: Fix intel_runtime_pm_get_noresume() wakeref assert   Patchwork
• [PATCH 1/2] Revert "drm/i915/psr: CAN_PSR and CAN_PANEL_REPLAY can be now local defines"   Jouni Högander
  • [PATCH 2/2] Revert "drm/i915/display: No need for full modeset due to psr"   Jouni Högander
  • ✓ Fi.CI.BAT: success for series starting with [1/2] Revert "drm/i915/psr: CAN_PSR and CAN_PANEL_REPLAY can be now local defines"   Patchwork
  • ✗ Fi.CI.IGT: failure for series starting with [1/2] Revert "drm/i915/psr: CAN_PSR and CAN_PANEL_REPLAY can be now local defines"   Patchwork
• [PATCH] drm/i915: Add special execution time measurements for pipe evasion section   Stanislav Lisovskiy
  • ✗ Fi.CI.BAT: failure for drm/i915: Add special execution time measurements for pipe evasion section (rev9)   Patchwork
  • ✗ Fi.CI.BAT: failure for drm/i915: Add special execution time measurements for pipe evasion section (rev10)   Patchwork
  • ✓ Fi.CI.BAT: success for drm/i915: Add special execution time measurements for pipe evasion section (rev11)   Patchwork
  • ✗ Fi.CI.IGT: failure for drm/i915: Add special execution time measurements for pipe evasion section (rev11)   Patchwork
• [PATCH 0/7] Implement CMRR Support   Mitul Golani
  • [PATCH 1/7] drm/i915: Define and compute Transcoder CMRR registers   Mitul Golani
  • [PATCH 2/7] drm/i915: Add Enable/Disable for CMRR based on VRR state   Mitul Golani
  • [PATCH 3/7] drm/i915: Compute CMRR and calculate vtotal   Mitul Golani
  • [PATCH 4/7] Add refresh rate divider to struct representing AS SDP   Mitul Golani
  • [PATCH 5/7] drm/i915/display: Add support for pack and unpack   Mitul Golani
  • [PATCH 6/7] drm/i915/display: Compute Adaptive sync SDP params   Mitul Golani
  • [PATCH 7/7] drm/i915/display: Compute vrr vsync params   Mitul Golani
  • ✗ Fi.CI.BUILD: failure for Implement CMRR Support (rev2)   Patchwork
  • [PATCH 0/7] Implement CMRR Support   Mitul Golani
    • [PATCH 1/7] drm/i915: Define and compute Transcoder CMRR registers   Mitul Golani
    • [PATCH 2/7] drm/i915: Add Enable/Disable for CMRR based on VRR state   Mitul Golani
    • [PATCH 3/7] drm/i915: Compute CMRR and calculate vtotal   Mitul Golani
    • [PATCH 4/7] Add refresh rate divider to struct representing AS SDP   Mitul Golani
    • [PATCH 5/7] drm/i915/display: Add support for pack and unpack   Mitul Golani
    • [PATCH 6/7] drm/i915/display: Compute Adaptive sync SDP params   Mitul Golani
    • [PATCH 7/7] drm/i915/display: Compute vrr vsync params   Mitul Golani
    • ✗ Fi.CI.BAT: failure for Implement CMRR Support (rev3)   Patchwork
• [i-g-t V6 00/41] IGT tests for the KMS Color Pipeline API   Bhanuprakash Modem
  • [i-g-t V6 01/41] lib/drmtest: Add is_vkms_device()   Bhanuprakash Modem
  • [i-g-t V6 02/41] tests/kms_writeback: Fix kms_writeback for VKMS   Bhanuprakash Modem
  • [i-g-t V6 00/41] IGT tests for the KMS Color Pipeline API   Bhanuprakash Modem
    • [i-g-t V6 01/41] lib/drmtest: Add is_vkms_device()   Bhanuprakash Modem
    • [i-g-t V6 02/41] tests/kms_writeback: Fix kms_writeback for VKMS   Bhanuprakash Modem
    • [i-g-t V6 03/41] lib/igt_kms: Move get_writeback_formats_blob to lib   Bhanuprakash Modem
    • [i-g-t V6 04/41] lib/igt_kms: Introduce DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE   Bhanuprakash Modem
    • [i-g-t V6 05/41] include/drm-uapi: Add COLOROP object   Bhanuprakash Modem
    • [i-g-t V6 06/41] drm-uapi: Add 3x4 CTM   Bhanuprakash Modem
    • [i-g-t V6 07/41] drm-uapi: Add 1D LUT drm_colorop_type   Bhanuprakash Modem
    • [i-g-t V6 08/41] lib/igt_kms: Introduce drm_colorop and COLOR_PIPELINE   Bhanuprakash Modem
    • [i-g-t V6 09/41] tests/kms_properties: Add colorop properties test   Bhanuprakash Modem
    • [i-g-t V6 10/41] igt/color: Add SW color transform functionality   Bhanuprakash Modem
    • [i-g-t V6 11/41] lib/igt_fb: Add copy_fb function   Bhanuprakash Modem
    • [i-g-t V6 12/41] tests/kms_colorop: Add kms_colorop tests   Bhanuprakash Modem
    • [i-g-t V6 13/41] lib/igt_kms: Add support for DATA colorop property   Bhanuprakash Modem
    • [i-g-t V6 14/41] lib/igt_color: Add support for 3x4 matrices   Bhanuprakash Modem
    • [i-g-t V6 15/41] tests/kms_colorop: Add 3x4 CTM tests   Bhanuprakash Modem
    • [i-g-t V6 16/41] tests/kms_colorop: Add bypass test   Bhanuprakash Modem
    • [i-g-t V6 17/41] tests/kms_colorop: Parametrize the buffer format   Bhanuprakash Modem
    • [i-g-t V6 18/41] tests/kms_colorop: Add 10bpc test and skip if format not supported   Bhanuprakash Modem
    • [i-g-t V6 19/41] tests/kms_colorop: Skip if writeback does not support fourcc   Bhanuprakash Modem
    • [i-g-t V6 20/41] lib/igt_fb: Allow any non-planar format for igt_copy_fb   Bhanuprakash Modem
    • [i-g-t V6 21/41] kms/colorop: Do proper setup and cleanup   Bhanuprakash Modem
    • [i-g-t V6 22/41] lib/igt_color: Support color transform for XRGB2101010   Bhanuprakash Modem
    • [i-g-t V6 23/41] tests/kms_colorop: Set wide [13, 13] bracket for comparison on amdgpu   Bhanuprakash Modem
    • [i-g-t V6 24/41] lib/igt_color: Add PQ variants for 0-1 and 0-125 range   Bhanuprakash Modem
    • [i-g-t V6 25/41] tests/kms_colorop: Add tests for PQ variants   Bhanuprakash Modem
    • [i-g-t V6 26/41] lib/igt_kms: increase MAX_NUM_COLOROPS to 128   Bhanuprakash Modem
    • [i-g-t V6 27/41] tests/kms_colorop: Add a sRGB test for EOTF -> Inverse EOTF -> EOTF   Bhanuprakash Modem
    • [i-g-t V6 28/41] lib/igt_color: add BT2020/BT709 transfer functions   Bhanuprakash Modem
    • [i-g-t V6 29/41] tests/kms_colorop: Add tests for BT2020/BT709 TFs   Bhanuprakash Modem
    • [i-g-t V6 30/41] lib/igt_color: Add 1D LUT color transformation support   Bhanuprakash Modem
    • [i-g-t V6 31/41] test/kms_colorop: Add tests that exercise the 1D LUT colorops   Bhanuprakash Modem
    • [i-g-t V6 32/41] tests/kms_colorop: Add multiplier tests   Bhanuprakash Modem
    • [i-g-t V6 33/41] tests/kms_properties: Fix compilation errors   Bhanuprakash Modem
    • [i-g-t V6 34/41] lib/igt_kms: Destroy colorops on exit   Bhanuprakash Modem
    • [i-g-t V6 35/41] lib/colorops: Move few helpers to common place to reuse   Bhanuprakash Modem
    • [i-g-t V6 36/41] drm-uapi: Add 3x3 CTM   Bhanuprakash Modem
    • [i-g-t V6 37/41] drm-uapi: Add multi segmented 1D LUT   Bhanuprakash Modem
    • [i-g-t V6 38/41] lib/igt_color: Add support for 3x3 matrices   Bhanuprakash Modem
    • [i-g-t V6 39/41] lib/colorops: Add support for Custom 1D LUT   Bhanuprakash Modem
    • [i-g-t V6 40/41] tests/kms_color_helper: Add helpers to clear colorops data   Bhanuprakash Modem
    • [i-g-t V6 41/41] tests/kms_color: Add plane color pipeline tests for Intel hardware   Bhanuprakash Modem
    • ✗ Fi.CI.BAT: failure for IGT tests for the KMS Color Pipeline API   Patchwork

Last message date: Mon Apr 29 16:22:26 UTC 2024
Archived on: Mon Apr 29 16:22:27 UTC 2024

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...