August 2016 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Aug 1 03:05:48 UTC 2016
Ending: Wed Aug 31 09:13:36 UTC 2016
Messages: 103

• [Libva] [PATCH] va_trace: add traces for vp9encoder   Daniel Charles
• [Libva] [PATCH][libva-intel-driver] vp9encoder: encoder to handle properly CSC on input surface   Daniel Charles
• [Libva] [PATCH][libva-intel-driver] i965_encoder: remove double check for VAStatus result   Daniel Charles
• [Libva] [PATCH v2][libva-intel-driver] i965_encoder: remove double check for VAStatus result   Daniel Charles
• [Libva] [PATCH v2][libva-intel-driver] i965_encoder: remove double check for VAStatus result   Charles, Daniel
• [Libva] [PATCH v3][libva-intel-driver] i965_encoder: remove double check for VAStatus result   Daniel Charles
• [Libva] [PATCH v2] Add one flag to use the qp_delta instead of qp priority for ROI under non-CQP mode   Sean V Kelley
• [Libva] [Libva-intel-driver][PATCH] Set cost for modes used for VP8 encoding   Sean V Kelley
• [Libva] [Libva-intel-driver][PATCH] decoder/h264: don't assert on invalid parameter   Sean V Kelley
• [Libva] [PATCH] i965_device_info: add CBR and VBR rate control flags for vdenc   Sean V Kelley
• [Libva] [PATCH] i965_device_info: add CBR and VBR rate control flags for vdenc   Sean V Kelley
• [Libva] [PATCH] i965_device_info: add CBR and VBR rate control flags for vdenc   Sean V Kelley
• [Libva] [PATCH][libva-intel-driver] i965_encoder: remove double check for VAStatus result   Sean V Kelley
• [Libva] [PATCH v2][libva-intel-driver] i965_encoder: remove double check for VAStatus result   Sean V Kelley
• [Libva] [PATCH v3][libva-intel-driver] i965_encoder: remove double check for VAStatus result   Sean V Kelley
• [Libva] [PATCH] Fix the code to avoid plus minus conversion if the result is already zero in the float to integer conversion algorithm.   Sean V Kelley
• [Libva] [Libva-intel-driver][PATCH 1/2] Encode/VP9: turn gen9_vp9_get_coded_status() into a local function   Sean V Kelley
• [Libva] [Libva-intel-driver][PATCH 2/2] Encode/VP9: Don't use hardcoded offsets   Sean V Kelley
• [Libva] [Libva-intel-driver][PATCH] Set cost to 0 for CHROMA INTRA mode   Sean V Kelley
• [Libva] [Libva-intel-driver][PATCH v2] Remove unused fields in struct encode_state   Sean V Kelley
• [Libva] [Libva-intel-driver][PATCH] Set the right transform 8x8 flag for Intra macroblock in VME output on BDW+   Sean V Kelley
• [Libva] Driver stuck on picture encode   Lionel Landwerlin
• [Libva] I want to use VA-API to support new platform, I want know something about Intel implementation   Randy Li
• [Libva] I want to use VA-API to support new platform, I want know something about Intel implementation   Randy Li
• [Libva] I want to use VA-API to support new platform, I want know something about Intel implementation   Randy Li
• [Libva] keep Nalu start code in VASliceDataBufferType data   Randy Li
• [Libva] keep Nalu start code in VASliceDataBufferType data   Randy Li
• [Libva] [PATCH V3: 00/11]Add ROI feature on Gen7/Gen7.5/Gen8/Gen9 and scaling list features.   Pengfei Qu
• [Libva] [PATCH V3: 01/11] Encoding: mbmv cost table related changes for ROI   Pengfei Qu
• [Libva] [PATCH V3: 02/11] Encoding: VME shader reads mbmv_cost from cost_table surface instead of constant buffer on Haswell   Pengfei Qu
• [Libva] [PATCH V3: 03/11] encoding: Send VME instruction uses one register as the desc parameter   Pengfei Qu
• [Libva] [PATCH V3: 04/11] Encoding: Pass the qp parameter into VME shader and VME shader select the different cost table based on input Qp on Ivy   Pengfei Qu
• [Libva] [PATCH V3: 05/11] Encoding: Dynamically select one mechanism to construct encoding command buffer for each frame on Haswell and Gen7/Gen6   Pengfei Qu
• [Libva] [PATCH V3: 06/11] Encoding: Add one ROI flag and ROI buffer   Pengfei Qu
• [Libva] [PATCH V3: 07/11] encoding:use the qp per every macroblock on Ivy and haswell   Pengfei Qu
• [Libva] [PATCH V3: 08/11] Encoding: ROI support for CQP/CBR on Haswell/Ivy   Pengfei Qu
• [Libva] [PATCH V3: 09/11] ROI:enable on gen8 and gen9   Pengfei Qu
• [Libva] [PATCH V3: 10/11] Adjust the maximum number of motion vectors for B frame on HSW+   Pengfei Qu
• [Libva] [PATCH V3: 11/11] scaling matrix of h264 encoder on gen7/gen7.5/gen8/gen9   Pengfei Qu
• [Libva] [PATCH V4: 00/11]Add ROI feature on Gen7/Gen7.5/Gen8/Gen9 and scaling list features.   Pengfei Qu
• [Libva] [PATCH V4: 01/11] Encoding: mbmv cost table related changes for ROI   Pengfei Qu
• [Libva] [PATCH V4: 02/11] Encoding: VME shader reads mbmv_cost from cost_table surface instead of constant buffer on Haswell   Pengfei Qu
• [Libva] [PATCH V4: 03/11] encoding: Send VME instruction uses one register as the desc parameter   Pengfei Qu
• [Libva] [PATCH V4: 04/11] Encoding: Pass the qp parameter into VME shader and VME shader select the different cost table based on input Qp on Ivy   Pengfei Qu
• [Libva] [PATCH V4: 05/11] Encoding: Dynamically select one mechanism to construct encoding command buffer for each frame on Haswell and Gen7/Gen6   Pengfei Qu
• [Libva] [PATCH V4: 06/11] Encoding: Add one ROI flag and ROI buffer   Pengfei Qu
• [Libva] [PATCH V4: 07/11] encoding:use the qp per every macroblock on Ivy and haswell   Pengfei Qu
• [Libva] [PATCH V4: 08/11] Encoding: ROI support for CQP/CBR on Haswell/Ivy   Pengfei Qu
• [Libva] [PATCH V4: 09/11] ROI:enable on gen8 and gen9   Pengfei Qu
• [Libva] [PATCH V4: 10/11] Adjust the maximum number of motion vectors for B frame on HSW+   Pengfei Qu
• [Libva] [PATCH V4: 11/11] scaling matrix of h264 encoder on gen7/gen7.5/gen8/gen9   Pengfei Qu
• [Libva] [PATCH] Encoding: Add ROI example   Pengfei Qu
• [Libva] [PATCH] Encoding: Add ROI example   Pengfei Qu
• [Libva] [PATCH 1/3] HEVC ENC:fill the correct chroma intra mode   Pengfei Qu
• [Libva] [PATCH 2/3] HEVC ENC:set the initial QP threshold to avoid the low quality in the first GOP   Pengfei Qu
• [Libva] [PATCH 1/2] HEVC ENC: 10bit support   Pengfei Qu
• [Libva] [PATCH 2/2] HEVC10 ENC: enable cbr   Pengfei Qu
• [Libva] [PATCH] i965_device_info: add CBR and VBR rate control flags for vdenc   Sreerenj
• [Libva] [PATCH] i965_device_info: add CBR and VBR rate control flags for vdenc   Sreerenj
• [Libva] [PATCH] i965_device_info: add CBR and VBR rate control flags for vdenc   Sreerenj
• [Libva] [PATCH] Fix the code to avoid plus minus conversion if the result is already zero in the float to integer conversion algorithm.   Ung, Teng En
• [Libva] [PATCH] Changed 'c' variable 'char' data type to 'int' data type (v3)   Xiang, Haihao
• [Libva] [PATCH v2] Add one flag to use the qp_delta instead of qp priority for ROI under non-CQP mode   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH] Set cost for modes used for VP8 encoding   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH] decoder/h264: don't assert on invalid parameter   Xiang, Haihao
• [Libva] [PATCH 2/3] Encoding: Add ROI example   Xiang, Haihao
• [Libva] [PATCH] va_trace: add traces for vp9encoder   Xiang, Haihao
• [Libva] [Libva-Intel-Driver][PATCH 2/2] VPP: Check the returned status of hsw_veb_pre_format_convert before VEBOX VPP   Xiang, Haihao
• [Libva] [Libva-Intel-Driver][PATCH V2 1/2] VPP: Check the VPP pipeline_parameter to avoid NULL pointer   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH 1/2] Encode/VP9: turn gen9_vp9_get_coded_status() into a local function   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH 2/2] Encode/VP9: Don't use hardcoded offsets   Xiang, Haihao
• [Libva] [PATCH V4: 00/11]Add ROI feature on Gen7/Gen7.5/Gen8/Gen9 and scaling list features.   Xiang, Haihao
• [Libva] [PATCH][libva-intel-driver] vp9encoder: encoder to handle properly CSC on input surface   Xiang, Haihao
• [Libva] Driver stuck on picture encode   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH] Set cost to 0 for CHROMA INTRA mode   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH] Remove unused fields in struct encode_state   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH v2] Remove unused fields in struct encode_state   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH] Set the right transform 8x8 flag for Intra macroblock in VME output on BDW+   Xiang, Haihao
• [Libva] I want to use VA-API to support new platform, I want know something about Intel implementation   Xiang, Haihao
• [Libva] [PATCH] Encoding: Add ROI example   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH 1/2] Cleanup gen9_mfc.c   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH 2/2] Remove 2 unused .g9b files   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH 2/2] Remove 2 unused .g9b files   Xiang, Haihao
• [Libva] [Libva-intel-driver][PATCH v2 2/2] Remove unused .g9a/.g9b files   Xiang, Haihao
• [Libva] [PATCH 1/3] HEVC ENC:fill the correct chroma intra mode   Xiang, Haihao
• [Libva] [PATCH V1][libva-intel-driver] Add the write_enabled flag of GPE media surface state   Xiang, Haihao
• [Libva] I want to use VA-API to support new platform, I want know something about Intel implementation   Xiang, Haihao
• [Libva] keep Nalu start code in VASliceDataBufferType data   Xiang, Haihao
• [Libva] replacement for player-ffmpeg-yami   Xu, Guangxin
• [Libva] [Libva-Intel-Driver][PATCH 1/2] VPP: Check the VPP pipeline_parameter to avoid NULL pointer   Zhao Yakui
• [Libva] [Libva-Intel-Driver][PATCH 2/2] VPP: Check the returned status of hsw_veb_pre_format_convert before VEBOX VPP   Zhao Yakui
• [Libva] [Libva-Intel-Driver][PATCH 2/2] VPP: Check the returned status of hsw_veb_pre_format_convert before VEBOX VPP   Zhao Yakui
• [Libva] [Libva-Intel-Driver][PATCH V2 1/2] VPP: Check the VPP pipeline_parameter to avoid NULL pointer   Zhao Yakui
• [Libva] [Libva-Intel-Driver][PATCH V2 2/2] VPP: Check the returned status of hsw_veb_pre_format_convert before VEBOX VPP   Zhao Yakui
• [Libva] Driver stuck on picture encode   Zhao Yakui
• [Libva] [Libva-intel-driver][PATCH 1/2] Encode/VP9: turn gen9_vp9_get_coded_status() into a local function   Zhao Yakui
• [Libva] [Libva-intel-driver][PATCH 2/2] Encode/VP9: Don't use hardcoded offsets   Zhao Yakui
• [Libva] [Libva-intel-driver][PATCH 2/2] Remove 2 unused .g9b files   Zhao Yakui
• [Libva] [Libva-intel-driver][PATCH v2 2/2] Remove unused .g9a/.g9b files   Zhao Yakui
• [Libva] [Libva-intel-driver][PATCH 1/2] Cleanup gen9_mfc.c   Zhao Yakui
• [Libva] I want to use VA-API to support new platform, I want know something about Intel implementation   Zhao Yakui
• [Libva] [PATCH] i965_device_info: add CBR and VBR rate control flags for vdenc   sreerenj.balachandran at intel.com
• [Libva] [PATCH V1][libva-intel-driver] Add the write_enabled flag of GPE media surface state   peng.chen

Last message date: Wed Aug 31 09:13:36 UTC 2016
Archived on: Wed Aug 31 09:15:31 UTC 2016

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...