August 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Aug 1 17:08:56 PDT 2013
Ending: Fri Aug 30 23:22:00 PDT 2013
Messages: 325

• [pulseaudio-discuss] RCF: Public API for managing nodes   Pierre-Louis Bossart
• [pulseaudio-discuss] RCF: Public API for managing nodes   Pierre-Louis Bossart
• [pulseaudio-discuss] RCF: Public API for managing nodes   Pierre-Louis Bossart
• [pulseaudio-discuss] Low latency audio in-out application   Pierre-Louis Bossart
• [pulseaudio-discuss] [PATCH 0/2] v2 module-tunnel-sink-new   Alexander Couzens
• [pulseaudio-discuss] [PATCH 1/2] thread_mq: supports a mainloop as thread/consumer   Alexander Couzens
• [pulseaudio-discuss] [PATCH 2/2] add module-tunnel-sink-new: experimental rewrite of module-tunnel using libpulse. Old module-tunnel shares duplicated functionality with libpulse because it is implementing pulse protocol again. It is also not as much tested as libpulse it and not refactored.   Alexander Couzens
• [pulseaudio-discuss] [PATCH] v3 simplified version   Alexander Couzens
• [pulseaudio-discuss] [PATCH] add module-tunnel-sink-new: experimental rewrite of module-tunnel using libpulse. Old module-tunnel shares duplicated functionality with libpulse because it is implementing pulse protocol again. It is also not as much tested as libpulse it and not refactored.   Alexander Couzens
• [pulseaudio-discuss] [PATCH 1/2] client-conf-x11|client-conf: refactor cookie loaders   Alexander Couzens
• [pulseaudio-discuss] [PATCH 2/2] context: add cookie loaders + setter   Alexander Couzens
• [pulseaudio-discuss] [PATCH] add module-tunnel-sink-new: experimental rewrite of module-tunnel using libpulse. Old module-tunnel shares duplicated functionality with libpulse because it is implementing pulse protocol again. It is also not as much tested as libpulse it and not refactored.   Alexander Couzens
• [pulseaudio-discuss] [PATCH] add module-tunnel-sink-new v4   Alexander Couzens
• [pulseaudio-discuss] [PATCH] module-tunnel-sink-new: add a rewrite of module-tunnel using libpulse   Alexander Couzens
• [pulseaudio-discuss] [PATCH 2/2] context: add cookie loaders + setter   Alexander Couzens
• [pulseaudio-discuss] [PATCH 1/2] client-conf: refactored cookie loaders   Alexander Couzens
• [pulseaudio-discuss] [PATCH 1/3] client-conf: refactor cookie loaders   Alexander Couzens
• [pulseaudio-discuss] [PATCH] module-tunnel-sink-new: add a rewrite of module-tunnel using libpulse   Alexander Couzens
• [pulseaudio-discuss] [PATCH] context: add pa_context_load_cookie_file()   Alexander Couzens
• [pulseaudio-discuss] [PATCH] tunnel-source-new: counterpart to module-tunnel-sink-new   Alexander Couzens
• [pulseaudio-discuss] Pulseaudio on raspberrypi   Jim Duda
• [pulseaudio-discuss] Pulseaudio on raspberrypi   Jim Duda
• [pulseaudio-discuss] Tap sound from one process   Magnus Ekhall
• [pulseaudio-discuss] An raop2 support   Hajime Fujita
• [pulseaudio-discuss] [PATCH] alsa-mixer: Prefer moving "Capture" before moving boosts   David Henningsson
• [pulseaudio-discuss] [PATCH] alsa-mixer: Prefer moving "Capture" before moving boosts   David Henningsson
• [pulseaudio-discuss] make pacmd less chatty, take 2   David Henningsson
• [pulseaudio-discuss] [PATCH 1/4] module-sine: Add rate argument   David Henningsson
• [pulseaudio-discuss] [PATCH 3/4] module-remap-sink: Add resample_method argument   David Henningsson
• [pulseaudio-discuss] [PATCH] hashmap: Allow freeing of keys in addition to values   David Henningsson
• [pulseaudio-discuss] RFC: Public API for managing nodes   David Henningsson
• [pulseaudio-discuss] RFC: Public API for managing nodes   David Henningsson
• [pulseaudio-discuss] RFC: Public API for managing nodes   David Henningsson
• [pulseaudio-discuss] RFC: Public API for managing nodes   David Henningsson
• [pulseaudio-discuss] [PATCH 1/2] sink, source: Add a flag to inhibit suspend   David Henningsson
• [pulseaudio-discuss] [PATCH 1/8] sink, source: Reduce indentation level in *_update_rate()   David Henningsson
• [pulseaudio-discuss] [PATCH 2/8] source: Fix monitor source rate changing   David Henningsson
• [pulseaudio-discuss] [PATCH 3/8] sink, source: Don't care about default and alternate rate in passthrough mode   David Henningsson
• [pulseaudio-discuss] [PATCH 4/8] sink, source: Fix default and alternate rate assertions   David Henningsson
• [pulseaudio-discuss] [PATCH 0/8] Rate update fixes   David Henningsson
• [pulseaudio-discuss] [PATCH 4/8] sink, source: Fix default and alternate rate assertions   David Henningsson
• [pulseaudio-discuss] [PATCH 0/8] Rate update fixes   David Henningsson
• [pulseaudio-discuss] [PATCH 2/8] source: Fix monitor source rate changing   David Henningsson
• [pulseaudio-discuss] [PATCH 0/8] Rate update fixes   David Henningsson
• [pulseaudio-discuss] [PATCH 2/8] source: Fix monitor source rate changing   David Henningsson
• [pulseaudio-discuss] [PATCH 4/8] sink, source: Fix default and alternate rate assertions   David Henningsson
• [pulseaudio-discuss] [PATCH 3/8] sink, source: Don't care about default and alternate rate in passthrough mode   David Henningsson
• [pulseaudio-discuss] [PATCH] bluetooth: Remove module-bluetooth-proximity   David Henningsson
• [pulseaudio-discuss] [PATCH 2/8] source: Fix monitor source rate changing   David Henningsson
• [pulseaudio-discuss] [PATCH 8/8] source: When updating a monitor source's rate, update the sink rate too   David Henningsson
• [pulseaudio-discuss] [PATCH] alsa-ucm: setting default active port based on jacks state   David Henningsson
• [pulseaudio-discuss] [PATCH v2 3/3] sink, source: Fix error reporting style for rate updates   David Henningsson
• [pulseaudio-discuss] [PATCH] alsa-ucm: setting default active port based on jacks state   David Henningsson
• [pulseaudio-discuss] [PATCH] suspend-on-idle: Allow disabling suspending for specific devices   David Henningsson
• [pulseaudio-discuss] [PATCH] alsa-ucm: setting default active port based on jacks state   David Henningsson
• [pulseaudio-discuss] [PATCH] suspend-on-idle: Allow disabling suspending for specific devices   David Henningsson
• [pulseaudio-discuss] [PATCH] alsa-ucm: setting default active port based on jacks state   David Henningsson
• [pulseaudio-discuss] [PATCH] bash-completion: Fix device completion for pacat   poljar (Damir Jelić)
• [pulseaudio-discuss] [PATCH 1/3] bash-completion: Add --monitor-stream completion to pacat   poljar (Damir Jelić)
• [pulseaudio-discuss] [PATCH 2/3] zsh-completion: Fix pacat device completion   poljar (Damir Jelić)
• [pulseaudio-discuss] [PATCH 3/3] zsh-completion: Add --monitor-stream completion to pacat   poljar (Damir Jelić)
• [pulseaudio-discuss] [PATCH] alsa-ucm: Make combination port names deterministic   Damir Jelić
• [pulseaudio-discuss] [PATCH 29/56] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/2] add module-tunnel-sink-new: experimental rewrite of module-tunnel using libpulse   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 42/56] bluetooth: Get BlueZ 5 device object   Tanu Kaskinen
• [pulseaudio-discuss] Freeze postponed   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 29/56] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   Tanu Kaskinen
• [pulseaudio-discuss] Tap sound from one process   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] sink-input: Don't assert when removing non-existent volume factor   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] sink-input: Don't assert when removing non-existent volume factor   Tanu Kaskinen
• [pulseaudio-discuss] RFC: Public API for managing nodes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] sink-input: Don't assert when removing non-existent volume factor   Tanu Kaskinen
• [pulseaudio-discuss] RCF: Public API for managing nodes   Tanu Kaskinen
• [pulseaudio-discuss] RFC: Public API for managing nodes   Tanu Kaskinen
• [pulseaudio-discuss] RFC: Public API for managing nodes   Tanu Kaskinen
• [pulseaudio-discuss] RFC: Public API for managing nodes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] thread_mq: supports a mainloop as thread/consumer   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 37/56] bluetooth: Parse BlueZ 5 device properties   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 40/56] bluetooth: Track devices in module-bluez5-discover   Tanu Kaskinen
• [pulseaudio-discuss] RCF: Public API for managing nodes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 26/56] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] sink, source: Add a flag to inhibit suspend   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] alsa: Allow sample spec override in mappings   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/2] alsa-ucm: Use playback/capture rate specification from UCM   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] sink, source: Add a flag to inhibit suspend   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] sink, source: Add a flag to inhibit suspend   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] sink, source: Add a flag to inhibit suspend   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/2] alsa-ucm: Add mechanism to prevent auto-suspend of sources/sinks   Tanu Kaskinen
• [pulseaudio-discuss] RFC: Public API for managing nodes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 37/56] bluetooth: Parse BlueZ 5 device properties   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 0/8] Rate update fixes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/8] sink, source: Reduce indentation level in *_update_rate()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/8] source: Fix monitor source rate changing   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 3/8] sink, source: Don't care about default and alternate rate in passthrough mode   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 4/8] sink, source: Fix default and alternate rate assertions   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 5/8] sink, source: Small readability improvement   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 6/8] sink, source: Return early from pa_*_update_rate(), if nothing needs to be done   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 7/8] source: Don't update the monitor source rate, if the sink is running   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 8/8] source: When updating a monitor source's rate, update the sink rate too   Tanu Kaskinen
• [pulseaudio-discuss] xrdp pulse sink   Tanu Kaskinen
• [pulseaudio-discuss] purpose of pa_core_check_idle()   Tanu Kaskinen
• [pulseaudio-discuss] Why do I keep finding crashes?   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/8] source: Fix monitor source rate changing   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 3/8] sink, source: Don't care about default and alternate rate in passthrough mode   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 4/8] sink, source: Fix default and alternate rate assertions   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 0/8] Rate update fixes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 4/8] sink, source: Fix default and alternate rate assertions   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 0/8] Rate update fixes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/8] source: Fix monitor source rate changing   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 0/8] Rate update fixes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/8] source: Fix monitor source rate changing   Tanu Kaskinen
• [pulseaudio-discuss] RCF: Public API for managing nodes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] add module-tunnel-sink-new: experimental rewrite of module-tunnel using libpulse. Old module-tunnel shares duplicated functionality with libpulse because it is implementing pulse protocol again. It is also not as much tested as libpulse it and not refactored.   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] source-output: Get the correct source for "direct_on_input" streams   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] bash-completion: Fix device completion for pacat   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] add module-tunnel-sink-new: experimental rewrite of module-tunnel using libpulse. Old module-tunnel shares duplicated functionality with libpulse because it is implementing pulse protocol again. It is also not as much tested as libpulse it and not refactored.   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 17/60] bluetooth: Register BlueZ 4 endpoints in a separate object path   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 18/60] bluetooth: Prefix BlueZ 4 card profiles enum with PA_BLUEZ4_   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 18/60] bluetooth: Prefix BlueZ 4 card profiles enum with PA_BLUEZ4_   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 19/60] build: Make the build of bluetooth modules BlueZ 4 specific   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] bluetooth: Remove module-bluetooth-proximity   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 21/60] bluetooth: Create stub for module-bluez5-discover   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 23/60] bluetooth: Track org.bluez for BlueZ 5   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 27/60] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 27/60] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 25/60] bluetooth: Create pa_bluetooth_device for BlueZ 5 support   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 30/60] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 31/60] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 32/60] bluetooth: Implement org.bluez.MediaEndpoint1.ClearConfiguration()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 37/60] bluetooth: Parse BlueZ 5 adapter properties   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 39/60] bluetooth: Parse BlueZ 5 device properties   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 40/60] bluetooth: Handle PropertiesChanged for org.bluez.Device1   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 42/60] bluetooth: Track devices in module-bluez5-discover   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 44/60] bluetooth: Get BlueZ 5 device object   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 48/60] bluetooth: Create BlueZ 5 card profile for each audio UUID   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 55/60] bluetooth: Process sink messages for BlueZ 5 cards   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 56/60] bluetooth: Process source messages for BlueZ 5 cards   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 57/60] bluetooth: Handle changes to BlueZ 5 transports state   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 59/60] bluetooth: Fail to load driver is discovery module is not loaded   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 60/60] bluetooth: Revive module-bluetooth-discover   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 27/60] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 27/60] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 30/60] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] module-tunnel-sink-new: add a rewrite of module-tunnel using libpulse   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] add module-tunnel-sink-new v4   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] client-conf-x11|client-conf: refactor cookie loaders   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 27/60] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/2] context: add cookie loaders + setter   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/2] context: add cookie loaders + setter   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/2] context: add cookie loaders + setter   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] client-conf: refactored cookie loaders   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/3] client-conf: refactor cookie loaders   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] module-tunnel-sink-new: add a rewrite of module-tunnel using libpulse   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] source-output: Get the correct source for "direct_on_input" streams   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/8] source: Fix monitor source rate changing   Tanu Kaskinen
• [pulseaudio-discuss] [PATCHv2 60/60] bluetooth: Revive module-bluetooth-discover   Tanu Kaskinen
• [pulseaudio-discuss] Low latency audio in-out application   Tanu Kaskinen
• [pulseaudio-discuss] Low latency audio in-out application   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 0/3] Rate update fixes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 1/3] source: Fix monitor source rate changing   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 2/3] source: When updating a monitor source's rate, update the sink rate too   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 3/3] sink, source: Fix error reporting style for rate updates   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] context: add pa_context_load_cookie_file()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] resampler: Never return zero for max block size   Tanu Kaskinen
• [pulseaudio-discuss] Why not RTP instead of TCP   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] resampler: Never return zero for max block size   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] suspend-on-idle: Allow disabling suspending for specific devices   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] suspend-on-idle: Allow disabling suspending for specific devices   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 29/56] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   Thomas Martitz
• [pulseaudio-discuss] [PATCH] sample: Apply SPARC-specific condition on SPARC only   Thomas Martitz
• [pulseaudio-discuss] [PATCH] sample: Apply SPARC-specific condition on SPARC only   Thomas Martitz
• [pulseaudio-discuss] [PATCH 3/4] module-remap-sink: Add resample_method argument   Peter Meerwald
• [pulseaudio-discuss] [PATCH 1/4] module-sine: Add rate argument   Peter Meerwald
• [pulseaudio-discuss] resample_method argument for module-remap-*   Peter Meerwald
• [pulseaudio-discuss] [PATCH 1/6] modargs: Add pa_modargs_get_resample_method()   Peter Meerwald
• [pulseaudio-discuss] [PATCH 2/6] modargs: Add pa_modargs_get_sample_rate()   Peter Meerwald
• [pulseaudio-discuss] [PATCH 3/6] modules: Make use of new function pa_modargs_get_sample_rate()   Peter Meerwald
• [pulseaudio-discuss] [PATCH 4/6] module-sine: Add rate argument   Peter Meerwald
• [pulseaudio-discuss] [PATCH 5/6] module-remap-sink: Add resample_method argument   Peter Meerwald
• [pulseaudio-discuss] [PATCH 6/6] module-remap-source: Add resample_method argument   Peter Meerwald
• [pulseaudio-discuss] purpose of pa_core_check_idle()   Mohan R
• [pulseaudio-discuss] [PATCH] sample: Apply SPARC-specific condition on SPARC only   Arun Raghavan
• [pulseaudio-discuss] [PATCH] alsa-mixer: Prefer moving "Capture" before moving boosts   Arun Raghavan
• [pulseaudio-discuss] [PATCH] alsa-mixer: Prefer moving "Capture" before moving boosts   Arun Raghavan
• [pulseaudio-discuss] [PATCH] sink-input: Don't assert when removing non-existent volume factor   Arun Raghavan
• [pulseaudio-discuss] make pulseaudio-aggregate-configure error for Android 4.2.2_r1.2   Arun Raghavan
• [pulseaudio-discuss] [PATCH] sink-input: Don't assert when removing non-existent volume factor   Arun Raghavan
• [pulseaudio-discuss] PA UCM support (Volume and Jack)   Arun Raghavan
• [pulseaudio-discuss] [PATCH] doc: Update LICENSE to reflect optional libpulse dep on libdbus   Arun Raghavan
• [pulseaudio-discuss] [PATCH] doc: Update LICENSE to reflect optional libpulse dep on libdbus   Arun Raghavan
• [pulseaudio-discuss] [PATCH] doc: Update LICENSE to reflect optional libpulse dep on libdbus   Arun Raghavan
• [pulseaudio-discuss] [PATCH] sink-input: Don't assert when removing non-existent volume factor   Arun Raghavan
• [pulseaudio-discuss] [PATCH] sink-input: Don't assert when removing non-existent volume factor   Arun Raghavan
• [pulseaudio-discuss] [PATCH] sink-input: Don't assert when removing non-existent volume factor   Arun Raghavan
• [pulseaudio-discuss] [PATCH 1/3] sink-input: Don't assert when removing non-existent volume factor   Arun Raghavan
• [pulseaudio-discuss] [PATCH] hashmap: Allow freeing of keys in addition to values   Arun Raghavan
• [pulseaudio-discuss] [PATCH] hashmap: Allow freeing of keys in addition to values   Arun Raghavan
• [pulseaudio-discuss] PA UCM support (Volume and Jack)   Arun Raghavan
• [pulseaudio-discuss] [PATCH 1/2] alsa: Allow sample spec override in mappings   Arun Raghavan
• [pulseaudio-discuss] [PATCH 2/2] alsa-ucm: Use playback/capture rate specification from UCM   Arun Raghavan
• [pulseaudio-discuss] UCM and modem PCMs (again)   Arun Raghavan
• [pulseaudio-discuss] [PATCH 1/2] sink, source: Add a flag to inhibit suspend   Arun Raghavan
• [pulseaudio-discuss] [PATCH 2/2] alsa-ucm: Add mechanism to prevent auto-suspend of sources/sinks   Arun Raghavan
• [pulseaudio-discuss] [PATCH 1/2] alsa: Allow sample spec override in mappings   Arun Raghavan
• [pulseaudio-discuss] [PATCH 1/2] sink, source: Add a flag to inhibit suspend   Arun Raghavan
• [pulseaudio-discuss] [PATCH 1/2] sink, source: Add a flag to inhibit suspend   Arun Raghavan
• [pulseaudio-discuss] [PATCH 2/2] alsa-ucm: Use playback/capture rate specification from UCM   Arun Raghavan
• [pulseaudio-discuss] [PATCH 1/2] sink, source: Add a flag to inhibit suspend   Arun Raghavan
• [pulseaudio-discuss] make pulseaudio-aggregate-configure error for Android 4.2.2_r1.2   Arun Raghavan
• [pulseaudio-discuss] Why do I keep finding crashes?   Arun Raghavan
• [pulseaudio-discuss] [Fwd: Audio Miniconference 2013 - Edinburgh 21st October]   Arun Raghavan
• [pulseaudio-discuss] F*** skype   Arun Raghavan
• [pulseaudio-discuss] [PATCH] alsa-ucm: Make combination port names deterministic   Arun Raghavan
• [pulseaudio-discuss] Pulseaudio on raspberrypi   Alex Schenkman
• [pulseaudio-discuss] Pulseaudio on raspberrypi   Alex Schenkman
• [pulseaudio-discuss] Low latency audio in-out application   Svein Seldal
• [pulseaudio-discuss] Low latency audio in-out application   Svein Seldal
• [pulseaudio-discuss] xrdp pulse sink   Jay Sorg
• [pulseaudio-discuss] PA UCM support (Volume and Jack)   Felipe Tonello
• [pulseaudio-discuss] PA UCM support (Volume and Jack)   Felipe Tonello
• [pulseaudio-discuss] PA UCM support (Volume and Jack)   Felipe Tonello
• [pulseaudio-discuss] [PATCH] alsa-ucm: setting default active port based on jacks state   Felipe Tonello
• [pulseaudio-discuss] [PATCH] alsa-ucm: setting default active port based on jacks state   Felipe Tonello
• [pulseaudio-discuss] [PATCH] alsa-ucm: setting default active port based on jacks state   Felipe Tonello
• [pulseaudio-discuss] [PATCH] alsa-ucm: setting default active port based on jacks state   Felipe Tonello
• [pulseaudio-discuss] [PATCH] alsa-ucm: setting default active port based on jacks state   Felipe F. Tonello
• [pulseaudio-discuss] [PATCH 29/56] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 29/56] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 29/56] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 31/56] bluetooth: Implement org.bluez.MediaEndpoint1.ClearConfiguration()   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 29/56] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 26/56] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 42/56] bluetooth: Get BlueZ 5 device object   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 37/56] bluetooth: Parse BlueZ 5 device properties   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 40/56] bluetooth: Track devices in module-bluez5-discover   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 26/56] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 26/56] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 29/56] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 37/56] bluetooth: Parse BlueZ 5 device properties   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 37/56] bluetooth: Parse BlueZ 5 device properties   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 21/56] bluetooth: Create pa_bluetooth_discovery for BlueZ 5   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 18/56] build: Load the right modules depending on the BlueZ version   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCHv2 17/60] bluetooth: Register BlueZ 4 endpoints in a separate object path   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCHv2 18/60] bluetooth: Prefix BlueZ 4 card profiles enum with PA_BLUEZ4_   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCHv2 19/60] build: Make the build of bluetooth modules BlueZ 4 specific   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCHv2 21/60] bluetooth: Create stub for module-bluez5-discover   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCHv2 23/60] bluetooth: Track org.bluez for BlueZ 5   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCHv2 27/60] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCHv2 27/60] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCHv2 30/60] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   João Paulo Rechi Vita
• [pulseaudio-discuss] Why do I keep finding crashes?   Weedy
• [pulseaudio-discuss] Why do I keep finding crashes?   Weedy
• [pulseaudio-discuss] F*** skype   Weedy
• [pulseaudio-discuss] F*** skype   Weedy
• [pulseaudio-discuss] [PATCH] resampler: Never return zero for max block size   Raymond Yau
• [pulseaudio-discuss] [PATCH 31/56] bluetooth: Implement org.bluez.MediaEndpoint1.ClearConfiguration()   jprvita at gmail.com
• [pulseaudio-discuss] [PATCH 29/56] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   jprvita at gmail.com
• [pulseaudio-discuss] [PATCH 37/56] bluetooth: Parse BlueZ 5 device properties   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 00/60] Refactor of BlueZ 5 support   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 01/60] Revert "bluetooth: Support transport auto-release"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 02/60] Revert "bluetooth: Update to new BlueZ 5 transport acquire/release API"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 03/60] Revert "bluetooth: Support media transport's State property"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 04/60] Revert "bluetooth: Parse media transport's properties"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 05/60] Revert "bluetooth: Support Properties.PropertiesChanged signal"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 06/60] Revert "bluetooth: Support ObjectManager interface add/remove"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 07/60] Revert "bluetooth: BlueZ 5 interface rename to org.bluez.MediaTransport1"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 08/60] Revert "bluetooth: BlueZ 5 interface rename to org.bluez.Media1"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 09/60] Revert "bluetooth: BlueZ 5 interface rename to org.bluez.MediaEndpoint1"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 10/60] Revert "bluetooth: Fix error checking style"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 11/60] Revert "bluetooth: Parse the tree returned by ObjectManager"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 12/60] Revert "bluetooth: Detect BlueZ 5"   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 13/60] bluetooth: Update modules description and copyright   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 14/60] bluetooth: Rename bluetooth modules to BlueZ 4   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 15/60] bluetooth: Rename shared struct to make it BlueZ 4 specific   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 16/60] bluetooth: Name BlueZ 4 symbols accordingly   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 17/60] bluetooth: Register BlueZ 4 endpoints in a separate object path   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 18/60] bluetooth: Prefix BlueZ 4 card profiles enum with PA_BLUEZ4_   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 19/60] build: Make the build of bluetooth modules BlueZ 4 specific   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 20/60] build: Add support for enabling/disabling BlueZ 5 support   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 21/60] bluetooth: Create stub for module-bluez5-discover   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 22/60] bluetooth: Create pa_bluetooth_discovery for BlueZ 5   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 23/60] bluetooth: Track org.bluez for BlueZ 5   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 24/60] bluetooth: Create infrastrucure for bluetooth hooks   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 25/60] bluetooth: Create pa_bluetooth_device for BlueZ 5 support   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 26/60] bluetooth: Remove all devices when org.bluez goes away   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 27/60] bluetooth: Create pa_bluetooth_transport for BlueZ 5 support   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 28/60] bluetooth: Register MediaEndpoint1 objects with D-Bus   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 29/60] bluetooth: Check if any transport is connected   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 30/60] bluetooth: Implement org.bluez.MediaEndpoint1.SetConfiguration()   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 31/60] bluetooth: Implement org.bluez.MediaEndpoint1.SelectConfiguration()   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 32/60] bluetooth: Implement org.bluez.MediaEndpoint1.ClearConfiguration()   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 33/60] bluetooth: Add utility function to send D-Bus messages with reply   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 34/60] bluetooth: Get managed objects   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 35/60] bluetooth: Handle InterfacesAdded and InterfacesRemoved   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 36/60] bluetooth: Parse BlueZ 5 D-Bus interfaces   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 37/60] bluetooth: Parse BlueZ 5 adapter properties   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 38/60] bluetooth: Register endpoints with BlueZ 5 adapter   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 39/60] bluetooth: Parse BlueZ 5 device properties   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 40/60] bluetooth: Handle PropertiesChanged for org.bluez.Device1   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 41/60] bluetooth: Handle PropertiesChanged for org.bluez.MediaTransport1   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 42/60] bluetooth: Track devices in module-bluez5-discover   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 43/60] bluetooth: Create module-bluez5-device   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 44/60] bluetooth: Get BlueZ 5 device object   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 45/60] bluetooth: Unload module-bluez5-device on device's disconnection   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 46/60] bluetooth: Create BlueZ 5 card   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 47/60] bluetooth: Create BlueZ 5 card ports   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 48/60] bluetooth: Create BlueZ 5 card profile for each audio UUID   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 49/60] bluetooth: Initialize profiles for BlueZ 5 cards   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 50/60] bluetooth: Create sink for BlueZ 5 cards   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 51/60] bluetooth: Create source for BlueZ 5 cards   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 52/60] bluetooth: Start / stop I/O thread for BlueZ 5 cards   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 53/60] bluetooth: Set card profile for BlueZ 5 cards   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 54/60] bluetooth: Create I/O thread function for BlueZ 5 cards   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 55/60] bluetooth: Process sink messages for BlueZ 5 cards   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 56/60] bluetooth: Process source messages for BlueZ 5 cards   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 57/60] bluetooth: Handle changes to BlueZ 5 transports state   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 58/60] bluetooth: Implement get_n_used() for module-bluez5-device   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 59/60] bluetooth: Fail to load driver is discovery module is not loaded   jprvita at gmail.com
• [pulseaudio-discuss] [PATCHv2 60/60] bluetooth: Revive module-bluetooth-discover   jprvita at gmail.com
• [pulseaudio-discuss] [PATCH 18/60] bluetooth: Prefix BlueZ 4 card profiles enum with PA_BLUEZ4_   jprvita at gmail.com
• [pulseaudio-discuss] [PATCH] bluetooth: Remove module-bluetooth-proximity   jprvita at gmail.com
• [pulseaudio-discuss] [PATCH 19/60] build: Make the build of bluetooth modules BlueZ 4 specific   jprvita at gmail.com
• [pulseaudio-discuss] [PATCH 20/60] build: Add support for enabling/disabling BlueZ 5 support   jprvita at gmail.com
• [pulseaudio-discuss] Why not RTP instead of TCP   brian mullan
• [pulseaudio-discuss] pulse 4 sound stuttering from flash-player and 5.1 streams   shmick at riseup.net

Last message date: Fri Aug 30 23:22:00 PDT 2013
Archived on: Fri Aug 30 23:22:05 PDT 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...