December 2024 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Dec 1 00:27:04 UTC 2024
Ending: Tue Dec 31 19:55:47 UTC 2024
Messages: 1537

• Linux 6.12.4 - crash dma_alloc_attrs+0x12b via ipu6   Sakari Ailus
• [PATCH v10 1/4] drm: Introduce device wedged event   André Almeida
• [PATCH v10 2/4] drm/doc: Document device wedged event   André Almeida
• [PATCH 0/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH 1/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH 1/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH 1/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH 1/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH 1/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH v2 0/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH v2 1/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH v2 1/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH v3 0/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH v3 1/1] drm/amdgpu: Use device wedged event   André Almeida
• [PATCH v10 2/4] drm/doc: Document device wedged event   André Almeida
• [PATCH v1] drm/i915/selftests: Add delay to stabilize frequency in live_rps_power   Sk Anirban
• [PATCH v2] drm/i915/selftests: Add delay to stabilize frequency in live_rps_power   Sk Anirban
• [PATCH v2] drm/i915/selftests: Add delay to stabilize frequency in live_rps_power   Anirban, Sk
• [PATCH v2 0/6] prunue audio frequencies based on bw limits for DP2   B, Jeevan
• ✗ Fi.CI.BUILD: failure for drm/connector: add eld_mutex to protect connector->eld   Dmitry Baryshkov
• [PATCH 00/10] drm/connector: add eld_mutex to protect connector->eld   Dmitry Baryshkov
• [PATCH 07/10] drm/msm/dp: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH 01/10] drm/crtc: Add histogram properties   Dmitry Baryshkov
• [PATCHv2 01/10] drm/crtc: Add histogram properties   Dmitry Baryshkov
• [PATCH v2 3/3] drm: remove driver date from struct drm_driver and all drivers   Dmitry Baryshkov
• [PATCHv2 01/10] drm/crtc: Add histogram properties   Dmitry Baryshkov
• [PATCHv2 01/10] drm/crtc: Add histogram properties   Dmitry Baryshkov
• [v2 09/25] drm: Add helper to initialize segmented 1D LUT   Dmitry Baryshkov
• [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld   Dmitry Baryshkov
• [PATCH v2 01/10] drm/connector: add mutex to protect ELD from concurrent access   Dmitry Baryshkov
• [PATCH v2 02/10] drm/bridge: anx7625: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 03/10] drm/bridge: ite-it66121: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 05/10] drm/exynos: hdmi: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 06/10] drm/i915/audio: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 07/10] drm/msm/dp: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 08/10] drm/radeon: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 09/10] drm/sti: hdmi: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 10/10] drm/vc4: hdmi: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCHv2 01/10] drm/crtc: Add histogram properties   Dmitry Baryshkov
• [PATCHv3 01/10] drm/crtc: Add histogram properties   Dmitry Baryshkov
• [PATCHv3 01/10] drm/crtc: Add histogram properties   Dmitry Baryshkov
• [PATCHv3 01/10] drm/crtc: Add histogram properties   Dmitry Baryshkov
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH RFC 4/4] drm/msm/dp: Add support for LTTPR handling   Dmitry Baryshkov
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Dmitry Baryshkov
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Dmitry Baryshkov
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Dmitry Baryshkov
• [PATCH v1] drm/ci: uprev IGT   Dmitry Baryshkov
• [PATCH v1] drm/ci: uprev IGT   Dmitry Baryshkov
• [PATCHv3 01/10] drm/crtc: Add histogram properties   Dmitry Baryshkov
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Dmitry Baryshkov
• [PATCH v2 1/5] drm/encoder_slave: make mode_valid accept const struct drm_display_mode   Dmitry Baryshkov
• [PATCH v2 2/5] drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()   Dmitry Baryshkov
• [PATCH v2 3/5] drm/sti: hda: pass const struct drm_display_mode* to hda_get_mode_idx()   Dmitry Baryshkov
• [PATCH v2 4/5] drm/connector: make mode_valid_ctx take a const struct drm_display_mode   Dmitry Baryshkov
• [PATCH v2 5/5] drm/connector: make mode_valid take a const struct drm_display_mode   Dmitry Baryshkov
• [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld   Dmitry Baryshkov
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Dmitry Baryshkov
• [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld   Dmitry Baryshkov
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Dmitry Baryshkov
• [PATCH 0/2] annotate i915_gem_object_trylock() as __must_check   Rolf Eike Beer
• [PATCH 1/2] drm/i915/selftests: check the return value of i915_gem_object_trylock()   Rolf Eike Beer
• [PATCH 2/2] drm/i915: mark i915_gem_object_trylock() as __must_check   Rolf Eike Beer
• [PATCH i-g-t] tools/gputop: Add GT freq and c6 stats   Vinay Belgaumkar
• [PATCH] drm/i915/slpc: Add sysfs for SLPC power profiles   Vinay Belgaumkar
• [PATCH] drm/i915/dg1: Fix power gate sequence.   Belgaumkar, Vinay
• [PATCH i-g-t] tools/gputop: Add GT freq and c6 stats   Belgaumkar, Vinay
• [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats   Vinay Belgaumkar
• [PATCH i-g-t v2 1/4] tools/gputop: Define data structs for PMU stats   Vinay Belgaumkar
• [PATCH i-g-t v2 2/4] lib/igt_drm_clients: Add pdev and driver info   Vinay Belgaumkar
• [PATCH i-g-t v2 3/4] lib/igt_perf: Add utils to extract PMU event info   Vinay Belgaumkar
• [PATCH i-g-t v2 4/4] tools/gputop: Add GT freq and c6 stats   Vinay Belgaumkar
• [PATCH v2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   Dnyaneshwar Bhadane
• [PATCH v2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   Bhadane, Dnyaneshwar
• [PATCH 0/2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   Dnyaneshwar Bhadane
• [PATCH v3 1/2] drm/i915/display: Add MTL subplatforms definition   Dnyaneshwar Bhadane
• [PATCH v3 2/2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   Dnyaneshwar Bhadane
• [PATCH v3 1/2] drm/i915/display: Add MTL subplatforms definition   Bhadane, Dnyaneshwar
• [PATCH v4 0/2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   Dnyaneshwar Bhadane
• [PATCH v2 1/2] drm/i915/display: Add MTL subplatforms definition   Dnyaneshwar Bhadane
• [PATCH v4 2/2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   Dnyaneshwar Bhadane
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Bhadane, Dnyaneshwar
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Bhadane, Dnyaneshwar
• [PATCH 1/4] drm/i915/dmc_wl: Use enum values for enable_dmc_wl   Bhadane, Dnyaneshwar
• [PATCH 2/4] drm/i915/dmc_wl: Show description string for enable_dmc_wl   Bhadane, Dnyaneshwar
• [PATCH 3/4] drm/i915/dmc_wl: Allow enable_dmc_wl=2 to mean "match any register"   Bhadane, Dnyaneshwar
• [PATCH 4/4] drm/i915/dmc_wl: Allow enable_dmc_wl=3 to mean "always locked"   Bhadane, Dnyaneshwar
• Regression on linux-next (next-20241120) and drm-tip   Borah, Chaitanya Kumar
• Regression on linux-next (next-20241120) and drm-tip   Borah, Chaitanya Kumar
• Regression on linux-next (next-20241122)   Borah, Chaitanya Kumar
• Regression on linux-next (next-20241120) and drm-tip   Borah, Chaitanya Kumar
• [PATCH] usb: typec: ucsi: Fix connector status writing past buffer size   Borah, Chaitanya Kumar
• [core-for-CI] nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary   Chaitanya Kumar Borah
• Regression on linux-next (next-20241203)   Borah, Chaitanya Kumar
• [PATCH] drm/i915/pps: include panel power cycle delay in debugfs   Borah, Chaitanya Kumar
• [PATCH] drm/i915/pps: debug log the remaining power cycle delay to wait   Borah, Chaitanya Kumar
• [RFC PATCH] drm/xe/display: Program double buffered LUT registers   Chaitanya Kumar Borah
• [PATCH] usb: typec: ucsi: Fix connector status writing past buffer size   Todd Brandt
• linux-next: manual merge of the drm-intel tree with the drm-intel-fixes tree   Mark Brown
• [RFC PATCH] i915/gt: Reapply workarounds in case the previous attempt failed.   Sebastian Brzezinka
• [PATCH v2] i915/gt: Reapply workarounds in case the previous attempt failed.   Sebastian Brzezinka
• [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst   Cavitt, Jonathan
• [PATCH 2/2] drm/i915/display: Initialize pipe_src in compute stage   Cavitt, Jonathan
• [PATCH] drm/i915/guc: Update guc_err message to show outstanding g2h responses   Cavitt, Jonathan
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Cavitt, Jonathan
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Cavitt, Jonathan
• [PATCH 1/3] drm/i915/display: Do not assume zero offset when duplicating global state   Cavitt, Jonathan
• [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate   Cavitt, Jonathan
• [PATCH 3/3] drm/i915/display: Use INTEL_GLOBAL_STATE_DEFAULTS   Cavitt, Jonathan
• [PATCH] drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE   Cavitt, Jonathan
• [PATCH v2 3/3] drm: remove driver date from struct drm_driver and all drivers   Louis Chauvet
• Regression on linux-next (next-20241120) and drm-tip   Luca Coelho
• Regression on linux-next (next-20241120) and drm-tip   Luca Coelho
• [core-for-CI] nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary   Luca Coelho
• [RFT] Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING."   Luca Coelho
• [RFT] Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING."   Luca Coelho
• [core-for-CI] Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING."   Luca Coelho
• [PATCH v2 1/5] drm/i915/dp: s/intel_encoder/encoder/   Luca Coelho
• [PATCH v2 2/5] drm/i915/dp: s/intel_connector/connector/   Luca Coelho
• [PATCH v2 3/5] drm/i915/dp: convert to struct intel_display   Luca Coelho
• [PATCH v2 4/5] drm/i915/dp: convert interfaces to struct intel_display   Luca Coelho
• [PATCH v2 5/5] drm/i915/dp: finish link training conversion to struct intel_display   Luca Coelho
• [RESEND 1/6] drm/i915/gvt: always pass struct intel_display * to register macros   Luca Coelho
• [RESEND 2/6] drm/i915: extract intel_uncore_trace.[ch]   Luca Coelho
• [RESEND 3/6] drm/i915/display: add intel_display_conversion.c to hide stuff better   Luca Coelho
• [RESEND 4/6] drm/i915/uncore: add to_intel_uncore() and use it   Luca Coelho
• [RESEND 5/6] drm/i915/display: add struct drm_device to struct intel_display conversion function   Luca Coelho
• [RESEND 6/6] drm/i915/display: drop i915_drv.h include from intel_display_trace.h   Luca Coelho
• [PATCH 1/3] drm/i915: split out i9xx_wm_regs.h   Luca Coelho
• [PATCH 2/3] drm/i915: relocate _VGA_MSR_WRITE register definition   Luca Coelho
• [PATCH 3/3] drm/i915: move DDI_CLK_VALFREQ next to other Cx0 PHY registers   Luca Coelho
• [PATCH 1/8] drm/i915/scaler: Extract skl_scaler_min_src_size()   Luca Coelho
• [PATCH 2/8] drm/i915/scaler: Extract skl_scaler_max_src_size()   Luca Coelho
• [PATCH 3/8] drm/i915/scaler: Extract skl_scaler_min_dst_size()   Luca Coelho
• [PATCH 4/8] drm/i915/scaler: Extract skl_scaler_max_dst_size()   Luca Coelho
• [PATCH 5/8] drm/i915/scaler: Nuke redundant code   Luca Coelho
• [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs   Luca Coelho
• [PATCH 7/8] drm/i915/scaler: s/excdeed/exceed/   Luca Coelho
• [PATCH 8/8] drm/i915/scaler: Add scaler tracepoints   Luca Coelho
• Re: [PATCH 00/10] compiler.h: refactor __is_constexpr() into is_const{,_true,_false}()   Kees Cook
• [PATCH 5/7] security: Replace get_task_comm() with %pTN   Kees Cook
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Imre Deak
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Imre Deak
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Imre Deak
• [PATCH 0/7] drm/dp_mst: Fix a few side-band message handling issues   Imre Deak
• [PATCH 1/7] drm/dp_mst: Fix resetting msg rx state after topology removal   Imre Deak
• [PATCH 2/7] drm/dp_mst: Verify request type in the corresponding down message reply   Imre Deak
• [PATCH 3/7] drm/dp_mst: Simplify error path in drm_dp_mst_handle_down_rep()   Imre Deak
• [PATCH 4/7] drm/dp_mst: Fix down request message timeout handling   Imre Deak
• [PATCH 5/7] drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()   Imre Deak
• [PATCH 6/7] drm/dp_mst: Reset message rx state after OOM in drm_dp_mst_handle_up_req()   Imre Deak
• [PATCH 7/7] drm/dp_mst: Use reset_msg_rx_state() instead of open coding it   Imre Deak
• ✗ i915.CI.BAT: failure for drm/dp_mst: Fix a few side-band message handling issues   Imre Deak
• [PATCH v2 4/7] drm/dp_mst: Fix down request message timeout handling   Imre Deak
• [PATCH v2 5/7] drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()   Imre Deak
• [PATCH] drm/i915/mst: add beginnings of DP MST documentation   Imre Deak
• ✓ i915.CI.Full: success for drm/dp_mst: Fix a few side-band message handling issues (rev3)   Imre Deak
• [PATCH] drm/i915/display: use IS_ERR_OR_NULL macro on DP tunnel mgr creation failure   Imre Deak
• [PATCH v3 0/7] drm/connector: Expose only a properly inited connector   Imre Deak
• [PATCH v3 01/11] drm/connector: Add a way to init/add a connector in separate steps   Imre Deak
• [PATCH v3 02/11] drm/connector: Add FIXME for GETRESOURCES ioctl wrt. uninited connectors   Imre Deak
• [PATCH v3 03/11] drm/connector: Add deprication notes for drm_connector_register/unregister   Imre Deak
• [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()   Imre Deak
• [PATCH v3 05/11] drm/i915/dp_mst: Expose a connector to kernel users after it's properly initialized   Imre Deak
• [PATCH v3 06/11] drm/amd/dp_mst: Expose a connector to kernel users after it's properly initialized   Imre Deak
• [PATCH v3 07/11] drm/nouveau/dp_mst: Expose a connector to kernel users after it's properly initialized   Imre Deak
• [PATCH v3 08/11] drm/connector: Warn if a connector is registered/added incorrectly   Imre Deak
• [PATCH v3 09/11] drm/tests: Add tests for drm_connector_dynamic_init()/register()   Imre Deak
• [PATCH v3 10/11] drm/i915/dp_mst: Fix error handling while adding a connector   Imre Deak
• [PATCH v3 11/11] drm/i915/dp_mst: Use intel_connector vs. drm_connector pointer in intel_dp_mst.c   Imre Deak
• [PATCH v3 01/11] drm/connector: Add a way to init/add a connector in separate steps   Imre Deak
• [PATCH v3 03/11] drm/connector: Add deprication notes for drm_connector_register/unregister   Imre Deak
• [PATCH v3 11/11] drm/i915/dp_mst: Use intel_connector vs. drm_connector pointer in intel_dp_mst.c   Imre Deak
• [PATCH v3 02/11] drm/connector: Add FIXME for GETRESOURCES ioctl wrt. uninited connectors   Imre Deak
• [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()   Imre Deak
• ✗ i915.CI.Full: failure for drm/connector: Expose only a properly inited connector   Imre Deak
• ✗ i915.CI.Full: failure for drm/display: use ERR_PTR on DP tunnel manager creation fail (rev3)   Imre Deak
• [PATCH v3] drm/display: use ERR_PTR on DP tunnel manager creation fail   Imre Deak
• [RFC v0 06/13] drm/i915/mst: add helper independent of MST for figuring out the TU   Imre Deak
• [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()   Imre Deak
• [PATCH v3 0/7] drm/connector: Expose only a properly inited connector   Imre Deak
• [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()   Imre Deak
• [PATCH v3 06/11] drm/amd/dp_mst: Expose a connector to kernel users after it's properly initialized   Imre Deak
• [PATCH] drm/i915/mst: use intel_dp_compute_config_limits() for DP MST   Imre Deak
• [PATCH v3 0/7] drm/connector: Expose only a properly inited connector   Imre Deak
• [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt   Imre Deak
• [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt   Imre Deak
• [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt   Imre Deak
• [PATCH v2 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Imre Deak
• [PATCH v2 02/16] drm/i915/mst: drop connector parameter from intel_dp_mst_bw_overhead()   Imre Deak
• [PATCH v2 03/16] drm/i915/mst: drop connector parameter from intel_dp_mst_compute_m_n()   Imre Deak
• [PATCH v2 04/16] drm/i915/mst: change return value of mst_stream_find_vcpi_slots_for_bpp()   Imre Deak
• [PATCH v2 05/16] drm/i915/mst: remove crtc_state->pbn   Imre Deak
• [PATCH v2 06/16] drm/i915/mst: split out a helper for figuring out the TU   Imre Deak
• [PATCH v2 07/16] drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST   Imre Deak
• [PATCH v2 08/16] drm/i915/ddi: enable 128b/132b TRANS_DDI_FUNC_CTL mode for UHBR SST   Imre Deak
• [PATCH v2 09/16] drm/i915/ddi: 128b/132b SST also needs DP_TP_CTL_MODE_MST   Imre Deak
• [PATCH v2 10/16] drm/i915/ddi: write payload for 128b/132b SST   Imre Deak
• [PATCH v2 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers   Imre Deak
• [PATCH v2 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers   Imre Deak
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Alex Deucher
• [PATCH v3 06/11] drm/amd/dp_mst: Expose a connector to kernel users after it's properly initialized   Alex Deucher
• [PATCH 4/5] drm/amdgpu: Constify 'struct bin_attribute'   Alex Deucher
• Regression on linux-next (next-20241203)   Tamir Duberstein
• Re: ✗ Fi.CI.BUILD: failure for drm/i915: Add drm_panic support   Jocelyn Falempe
• [RFC PATCH v2 0/5] drm/i915: Add drm_panic support   Jocelyn Falempe
• [PATCH v2 1/5] drm/i915/fbdev: Add intel_fbdev_get_vaddr()   Jocelyn Falempe
• [PATCH v2 2/5] drm/i915/display/i9xx: Add a disable_tiling() for i9xx planes   Jocelyn Falempe
• [PATCH v2 3/5] drm/i915/display: Add a disable_tiling() for skl planes   Jocelyn Falempe
• [PATCH v2 4/5] drm/i915/gem: Add i915_gem_object_panic_map()   Jocelyn Falempe
• [PATCH v2 5/5] drm/i915: Add drm_panic support   Jocelyn Falempe
• [PATCH v2 5/5] drm/i915: Add drm_panic support   Jocelyn Falempe
• [RFC PATCH v3 0/6] drm/i915: Add drm_panic support   Jocelyn Falempe
• [PATCH v3 1/6] drm/i915/fbdev: Add intel_fbdev_get_vaddr()   Jocelyn Falempe
• [PATCH v3 2/6] drm/i915/display/i9xx: Add a disable_tiling() for i9xx planes   Jocelyn Falempe
• [PATCH v3 3/6] drm/i915/display: Add a disable_tiling() for skl planes   Jocelyn Falempe
• [PATCH v3 4/6] drm/i915/gem: Add i915_gem_object_panic_map()   Jocelyn Falempe
• [PATCH v3 5/6] drm/i915: Add drm_panic support   Jocelyn Falempe
• [PATCH v3 6/6] drm/i915: Add drm_panic support for Y-tiling with DPT   Jocelyn Falempe
• [PATCH v1] drm/ci: uprev IGT   Helen Mae Koike Fornazier
• Regression on linux-next (next-20241120) and drm-tip   Furquim, Ulisses
• [PATCH 09/10] drm/sti: hdmi: use eld_mutex to protect access to connector->eld   Raphaël Gallais-Pou
• [PATCH 1/1] drm/i915/dsc: Expose dsc sink max slice count via debugfs   Garg, Nemesa
• [PATCH 3/6] drm/i915/display: Replace adjusted mode with pipe mode   Garg, Nemesa
• [PATCH] drm/i915/display: Add WA_14018221282   Nemesa Garg
• [PATCH 0/2] Consider joiner calculation for panel fitting   Nemesa Garg
• [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst   Nemesa Garg
• [PATCH 2/2] drm/i915/display: Initialize pipe_src in compute stage   Nemesa Garg
• [PATCH] drm/i915/gvt: store virtual_dp_monitor_edid in rodata   Garg, Nemesa
• [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst   Garg, Nemesa
• [PATCH 2/2] drm/i915/display: Initialize pipe_src in compute stage   Garg, Nemesa
• [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst   Garg, Nemesa
• [PATCH] drm/i915/display: Add WA_14018221282   Nemesa Garg
• [PATCH 3/4] drm/i915/dpt: Evict all DPT VMAs on suspend   Brian Geffon
• [PATCH 3/4] drm/i915/dpt: Evict all DPT VMAs on suspend   Brian Geffon
• [PATCH] drm/i915/dg1: Fix power gate sequence.   Ghimiray, Himal Prasad
• [PATCH 0/3] drm/i915/gvt: Deadcoding   Dr. David Alan Gilbert
• [PATCH] drm/i915: Remove deadcode   Dr. David Alan Gilbert
• [PATCH v5 0/6] Add AS_SDP to fastset   Mitul Golani
• [PATCH v5 1/6] drm/i915/vrr: Add crtc_state dump for vrr.vsync params   Mitul Golani
• [PATCH v5 2/6] drm/i915/vrr: Compute vrr.vsync_{start, end} during full modeset   Mitul Golani
• [PATCH v5 3/6] drm/i915/dp: fix the Adaptive sync Operation mode for SDP   Mitul Golani
• [PATCH v5 4/6] drm/i915/dp: Compute as_sdp.vtotal based on vrr timings   Mitul Golani
• [PATCH v5 5/6] drm/i915/dp: Compute as_sdp based on if vrr possible   Mitul Golani
• [PATCH v5 6/6] drm/i915/display: Move as sdp params change to fastset   Mitul Golani
• [RFC v2 0/6] Check if is vblank too short   Mitul Golani
• [RFC v2 1/6] drm/i915/scaler: Add and compute scaling factors   Mitul Golani
• [RFC v2 2/6] drm/i915/scaler: Add member to track scaler user   Mitul Golani
• [RFC v2 3/6] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler   Mitul Golani
• [RFC v2 4/6] drm/i915/scaler: Compute scling factors for pipe scaler   Mitul Golani
• [RFC v2 5/6] drm/i915/scaler: Check if vblank is sufficient for scaler   Mitul Golani
• [RFC v2 6/6] drm/i915/dsc: Check if dsc prefill sufficient for vblank   Mitul Golani
• [PATCH 1/6] drm/i915/wm: Initialize max_latency variable to appropriate value   Golani, Mitulkumar Ajitkumar
• [PATCH 3/6] drm/i915/wm: Rename enable_dpkgc variable   Golani, Mitulkumar Ajitkumar
• [PATCH 4/6] drm/i915/wm: Use intel_display structure in DPKGC code   Golani, Mitulkumar Ajitkumar
• [PATCH 5/6] drm/i915/display: Refactor DPKGC code to call it from atomic_commit_tail   Golani, Mitulkumar Ajitkumar
• [PATCH 6/6] drm/i915/wm: Modify latency programmed into PKG_C_LATENCY   Golani, Mitulkumar Ajitkumar
• [PATCH 1/6] drm/i915/wm: Initialize max_latency variable to appropriate value   Golani, Mitulkumar Ajitkumar
• [PATCH 5/6] drm/i915/wm: Modify latency programmed into PKG_C_LATENCY   Golani, Mitulkumar Ajitkumar
• [PATCH 6/6] drm/i915/wm: Club the initialized variables together   Golani, Mitulkumar Ajitkumar
• [PATCH 2/6] drm/i915/wm: Refactor dpkgc value prepration   Golani, Mitulkumar Ajitkumar
• [PATCH 6/6] drm/i915/wm: Club the initialized variables together   Golani, Mitulkumar Ajitkumar
• [PATCH] drm/i915/display: clean up DP Adaptive Sync SDP state mismatch logging   Golani, Mitulkumar Ajitkumar
• [PATCH v1 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Nitin Gote
• [PATCH v2 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Nitin Gote
• [PATCH v2 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Nitin Gote
• [PATCH v3] drm/i915/gt: Use ENGINE_TRACE for tracing.   Nitin Gote
• [PATCH v1 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Gote, Nitin R
• Re: ✗ i915.CI.Full: failure for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Gote, Nitin R
• [PATCH] drm/i915/xe3: do not configure auto min dbuf for cursor WMs   Vinod Govindapillai
• [PATCH v2 0/3] drm/i915/xe3: FBC Dirty rect feature support   Vinod Govindapillai
• [PATCH v2 1/3] drm/i915/xe: add register definitions for fbc dirty rect support   Vinod Govindapillai
• [PATCH v2 2/3] drm/i915/xe3: add dirty rect support for FBC   Vinod Govindapillai
• [PATCH v2 3/3] drm/i915/xe3: disable FBC if PSR2 selective fetch is enabled   Vinod Govindapillai
• Linux 6.12.4 - crash dma_alloc_attrs+0x12b via ipu6   Stanislaw Gruszka
• [PATCH v4] drm/i915: Fix NULL pointer dereference in capture_engine   John Harrison
• [PATCH 3/3] i915/guc: Accumulate active runtime on gt reset   John Harrison
• [PATCH] drm/i915: Add debug print about hw config table size   John Harrison
• [PULL] drm-xe-fixes   Thomas Hellstrom
• [PULL] drm-xe-fixes   Thomas Hellstrom
• [PULL] drm-xe-fixes   Thomas Hellstrom
• 6.13-rc1 graphics fail   Thomas Hellström
• [PATCH v2 1/2] drm/i915/lobf: Add lobf enablement in post plane update   Hogander, Jouni
• [PATCH v2 0/2] LOBF enablement fix   Hogander, Jouni
• [PATCH v2 1/2] drm/i915/lobf: Add lobf enablement in post plane update   Hogander, Jouni
• [PATCH v2 1/2] drm/i915/lobf: Add lobf enablement in post plane update   Hogander, Jouni
• [PATCH] drm/i915/dsc: Expose dsc sink max slice count via debugfs   Hogander, Jouni
• [PATCH 05/10] drm/i915/psr: Ensure SFF/CFF bits are not written at their sample point   Hogander, Jouni
• [PATCH v3] drm/i915/cmtg: Disable the CMTG   Hogander, Jouni
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Johan Hovold
• [PATCH v2 4/4] drm/msm/dp: Add support for LTTPR handling   Johan Hovold
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Johan Hovold
• [PATCH 00/10] PSR DSB support   Jouni Högander
• [PATCH 01/10] drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full update   Jouni Högander
• [PATCH 02/10] drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_update   Jouni Högander
• [PATCH 03/10] drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_update   Jouni Högander
• [PATCH 04/10] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers   Jouni Högander
• [PATCH 05/10] drm/i915/psr: Ensure SFF/CFF bits are not written at their sample point   Jouni Högander
• [PATCH 06/10] drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards   Jouni Högander
• [PATCH 07/10] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB   Jouni Högander
• [PATCH 08/10] drm/i915/psr: Changes for PSR2_MAN_TRK_CTL handling when DSB is in use   Jouni Högander
• [PATCH 09/10] drm/i915/psr: Remove DSB_SKIP_WAITS_EN chicken bit   Jouni Högander
• [PATCH 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Jouni Högander
• RE: ✗ i915.CI.BAT: failure for Flush DMC wakelock release work at the end of runtime suspend (rev2)   Illipilli, TejasreeX
• [PATCH] drm/i915: Add debug print about hw config table size   John.C.Harrison at Intel.com
• [PATCH] drm/i915/uc: Include requested frequency in slow firmware load messages   John.C.Harrison at Intel.com
• [PATCH v10 1/4] drm: Introduce device wedged event   Raag Jadav
• [PATCH v10 1/4] drm: Introduce device wedged event   Raag Jadav
• [PATCH v10 1/4] drm: Introduce device wedged event   Raag Jadav
• [PATCH v1] drm/i915/selftest: Log throttle reasons on failure   Raag Jadav
• [PATCH v1] drm/i915/selftest: Log throttle reasons on failure   Raag Jadav
• [PATCH v2] drm/i915/selftests: Add delay to stabilize frequency in live_rps_power   Raag Jadav
• [PATCHv10 00/10] Display Global Histogram   Raag Jadav
• [PATCHv10 00/10] Display Global Histogram   Raag Jadav
• [PATCHv10 00/10] Display Global Histogram   Raag Jadav
• [PATCH v1] drm/i915/selftest: Log throttle reasons on failure   Raag Jadav
• [PATCH v3 4/4] drm/i915/dg2: Implement Wa_14022698537   Raag Jadav
• [PATCH v3 4/4] drm/i915/dg2: Implement Wa_14022698537   Raag Jadav
• [PATCH v4 0/4] Implement Wa_14022698537   Raag Jadav
• [PATCH v4 1/4] drm/intel/pciids: Refactor DG2 PCI IDs into segment ranges   Raag Jadav
• [PATCH v4 2/4] drm/i915/dg2: Introduce DG2_D subplatform   Raag Jadav
• [PATCH v4 3/4] drm/i915: Introduce intel_cpu_info.c for CPU IDs   Raag Jadav
• [PATCH v4 4/4] drm/i915/dg2: Implement Wa_14022698537   Raag Jadav
• [PATCH v4 0/4] Implement Wa_14022698537   Raag Jadav
• [PATCH v4 0/4] Implement Wa_14022698537   Raag Jadav
• [PATCH v10 1/4] drm: Introduce device wedged event   Raag Jadav
• [PATCH v10 1/4] drm: Introduce device wedged event   Raag Jadav
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Raag Jadav
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Raag Jadav
• [PATCH v10 2/4] drm/doc: Document device wedged event   Raag Jadav
• [PATCH RESEND v2] drm/i915/gt: Log reason for setting TAINT_WARN at reset   Raag Jadav
• [PATCH RESEND v2] drm/i915/gt: Log reason for setting TAINT_WARN at reset   Raag Jadav
• [PATCH] drm/i915: Update license on selftest lists to MIT   Greg KH
• [PATCH] drm/i915: Update license on selftest lists to MIT   Greg KH
• [PATCH] drm/i915/cx0: split out mtl_get_cx0_buf_trans() to c10 and c20 variants   Kahola, Mika
• [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt   Mika Kahola
• [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt   Kahola, Mika
• [PATCH] drm/i915/hdcp: Remove log for HDMI HDCP LIC check   Suraj Kandpal
• [PATCH 1/6] drm/i915/wm: Initialize max_latency variable to appropriate value   Kandpal, Suraj
• [PATCH 3/6] drm/i915/wm: Rename enable_dpkgc variable   Kandpal, Suraj
• [PATCH 4/6] drm/i915/wm: Use intel_display structure in DPKGC code   Kandpal, Suraj
• [PATCH 3/6] drm/i915/wm: Rename enable_dpkgc variable   Kandpal, Suraj
• [PATCH 02/12] drm/i915/dp: Return early if DSC not supported   Kandpal, Suraj
• [PATCH 6/6] drm/i915/wm: Modify latency programmed into PKG_C_LATENCY   Kandpal, Suraj
• [PATCH 1/6] drm/i915/wm: Initialize max_latency variable to appropriate value   Suraj Kandpal
• [PATCH 2/6] drm/i915/wm: Refactor dpkgc value prepration   Suraj Kandpal
• [PATCH 3/6] drm/i915/wm: Use intel_display structure in DPKGC code   Suraj Kandpal
• [PATCH 4/6] drm/i915/display: Refactor DPKGC code to call it from atomic_commit_tail   Suraj Kandpal
• [PATCH 5/6] drm/i915/wm: Modify latency programmed into PKG_C_LATENCY   Suraj Kandpal
• [PATCH 6/6] drm/i915/wm: Club the initialized variables together   Suraj Kandpal
• [PATCHv3 08/10] drm/i915/histogram: histogram delay counter doesnt reset   Kandpal, Suraj
• [PATCHv6 09/10] drm/i915/histogram: Histogram changes for Display 20+   Kandpal, Suraj
• [PATCH 01/10] drm/crtc: Add histogram properties   Kandpal, Suraj
• [PATCHv5 06/10] drm/i915/histogram: histogram interrupt handling   Kandpal, Suraj
• [PATCH 07/10] drm/i915/display: handle drm-crtc histogram property updates   Kandpal, Suraj
• [PATCH 05/14] drm/i915/dp: Remove HAS_DSC macro for intel_dp_dsc_max_src_input_bpc   Kandpal, Suraj
• [PATCH 07/14] drm/i915/dp: Use intel_display in intel_dp_dsc_max_src_input_bpc()   Kandpal, Suraj
• [PATCH 6/6] drm/i915/wm: Club the initialized variables together   Kandpal, Suraj
• [PATCH v2 4/5] drm/i915/display: add intel_encoder_is_hdmi()   Kandpal, Suraj
• [PATCH v2 5/5] drm/i915/ddi: only call shutdown hooks for valid encoders   Kandpal, Suraj
• [PATCH 03/14] drm/i915/dp: Separate out helper for compute fec_enable   Kandpal, Suraj
• [PATCH 04/14] drm/i915/dp: Drop check for FEC in intel_dp_fec_compute_config   Kandpal, Suraj
• [PATCH 08/14] drm/i915/dp_mst: Use helpers to get dsc min/max input bpc   Kandpal, Suraj
• [PATCH v2] drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY   Kandpal, Suraj
• [PATCHv2 10/10] drm/i915/histogram: Enable pipe dithering   Kandpal, Suraj
• [PATCHv3 07/10] drm/i915/display: Handle drm-crtc histogram property updates   Kandpal, Suraj
• [PATCH 01/14] drm/i915/dp: Refactor FEC support check in intel_dp_supports_dsc   Kandpal, Suraj
• [PATCH 14/14] drm/i915/dp: Set the DSC link limits intel_dp_compute_config_link_bpp_limits   Kandpal, Suraj
• [PATCHv4] drm/i915/dp: Guarantee a minimum HBlank time   Kandpal, Suraj
• [PATCH 0/2] Extended Wake Timeout   Suraj Kandpal
• [PATCH 1/2] drm/dp: Add the DPCD register required for Extended wake timeout   Suraj Kandpal
• [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout   Suraj Kandpal
• [PATCH v3 1/6] drm/i915/ddi: change intel_ddi_init_{dp,hdmi}_connector() return type   Kandpal, Suraj
• [PATCH] drm/i915/cx0_phy: Fix C10 pll programming sequence   Suraj Kandpal
• [PATCH v3 4/6] drm/i915/ddi: gracefully handle errors from intel_ddi_init_hdmi_connector()   Kandpal, Suraj
• [PATCH] drm/i915/hdcp: Fix Repeater authentication during topology change   Suraj Kandpal
• [PATCH v2] drm/i915/display: drop unnecessary i915_drv.h includes   Kandpal, Suraj
• [PATCH 10/14] drm/i915/dp_mst: Use pipe_bpp->limits.{max/min}_bpp for dsc   Kandpal, Suraj
• [PATCH 14/14] drm/i915/dp_mst: Use link.{min/max}_bpp_x16   Kandpal, Suraj
• [PATCH v2] drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY   Kandpal, Suraj
• [PATCH] Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"   Suraj Kandpal
• [PATCH v4 2/2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   Kandpal, Suraj
• [PATCH v2 1/2] drm/i915/display: Add MTL subplatforms definition   Kandpal, Suraj
• [PATCH] drm/i915/display: use IS_ERR_OR_NULL macro on DP tunnel mgr creation failure   Krzysztof Karas
• [PATCH] drm/i915/display: use IS_ERR_OR_NULL macro on DP tunnel mgr creation failure   Krzysztof Karas
• [PATCH] drm/i915/display: use IS_ERR_OR_NULL macro on DP tunnel mgr creation failure   Krzysztof Karas
• [PATCH v2] drm/display: use ERR_PTR on DP tunnel manager creation fail   Krzysztof Karas
• [PATCH v2] drm/display: use ERR_PTR on DP tunnel manager creation fail   Krzysztof Karas
• [PATCH v3] drm/display: use ERR_PTR on DP tunnel manager creation fail   Krzysztof Karas
• ✗ i915.CI.BAT: failure for drm/display: use ERR_PTR on DP tunnel manager creation fail (rev2)   Krzysztof Karas
• [PATCH v2] i915/gt: Reapply workarounds in case the previous attempt failed.   Krzysztof Karas
• [PATCH] drm/i915/gt: Prevent uninitialized pointer reads   Krzysztof Karas
• [PATCH] drm/i915/gt: Prevent uninitialized pointer reads   Krzysztof Karas
• [PATCH v5] drm/i915: Fix NULL pointer dereference in capture_engine   Eugene Kobyak
• [PATCH v6] drm/i915: Fix NULL pointer dereference in capture_engine   Eugene Kobyak
• [PATCH i-g-t] tools/gputop: Add GT freq and c6 stats   Kamil Konieczny
• Linux 6.12.4 - crash dma_alloc_attrs+0x12b via ipu6   Greg Kroah-Hartman
• [PATCH] usb: typec: ucsi: Fix connector status writing past buffer size   Heikki Krogerus
• [PATCH] drm/i915/selftests: Use preemption timeout on cleanup   Janusz Krzysztofik
• ✗ i915.CI.BAT: failure for drm/i915/selftests: Use preemption timeout on cleanup   Janusz Krzysztofik
• [PATCH] drm/i915/selftests: Use preemption timeout on cleanup   Janusz Krzysztofik
• ✗ i915.CI.Full: failure for drm/i915/selftests: Use preemption timeout on cleanup   Janusz Krzysztofik
• [PATCH] drm/i915/selftests: Use preemption timeout on cleanup   Janusz Krzysztofik
• [PATCH] drm/i915/selftests: Use preemption timeout on cleanup   Janusz Krzysztofik
• [PATCH 07/10] drm/msm/dp: use eld_mutex to protect access to connector->eld   Abhinav Kumar
• [PATCH 07/10] drm/msm/dp: use eld_mutex to protect access to connector->eld   Abhinav Kumar
• [PATCH v10 1/4] drm: Introduce device wedged event   Christian König
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Christian König
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Christian König
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Christian König
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Christian König
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Christian König
• [PATCH v2 1/1] drm/amdgpu: Use device wedged event   Christian König
• [PATCH v3 1/1] drm/amdgpu: Use device wedged event   Christian König
• [PULL] drm-intel-gt-next   Joonas Lahtinen
• [PATCH 08/10] drm/i915/reg: replace __is_const_expr() by is_const_true() or is_const()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 01/10] compiler.h: add statically_false()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   David Laight
• [PATCH v2 5/5] drm/i915: Add drm_panic support   Maarten Lankhorst
• [PATCH] drm/xe/display: Re-use display vmas when possible   Maarten Lankhorst
• [PULL] drm-misc-fixes   Maarten Lankhorst
• [PATCH] drm/xe/display: Re-use display vmas when possible   Maarten Lankhorst
• [PATCH 0/5] drm/xe/display: Rework display init for reducing flickering.   Maarten Lankhorst
• [PATCH 1/5] drm/xe/display: Add intel_plane_initial_vblank_wait   Maarten Lankhorst
• [PATCH 2/5] drm/xe: Remove double pageflip   Maarten Lankhorst
• [PATCH 3/5] drm/xe: Move suballocator init to after display init   Maarten Lankhorst
• [PATCH 4/5] drm/xe: Defer irq init until after xe_display_init_noaccel   Maarten Lankhorst
• [PATCH 5/5] drm/xe/display: Use a single early init call for display   Maarten Lankhorst
• [PATCH v2] drm/xe: Defer irq init until after xe_display_init_noaccel   Maarten Lankhorst
• [PATCH] drm/xe/display: Use a single early init call for display   Maarten Lankhorst
• [PATCH] drm/xe/display: Use a single early init call for display   Maarten Lankhorst
• [PULL] drm-misc-fixes   Maarten Lankhorst
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Lazar, Lijo
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Lazar, Lijo
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Lazar, Lijo
• [PATCH v10 2/6] drm: make drm-active- stats optional   Yunxiang Li
• [PATCH v11 2/5] drm: make drm-active- stats optional   Yunxiang Li
• [PATCH] usb: typec: ucsi: Fix connector status writing past buffer size   Mario Limonciello
• [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()   Lin, Wayne
• 6.13-rc1 graphics fail   Genes Lists
• Linux 6.12.4 - crash dma_alloc_attrs+0x12b via ipu6   Genes Lists
• Linux 6.12.4 - crash dma_alloc_attrs+0x12b via ipu6   Genes Lists
• Linux 6.12.4 - crash dma_alloc_attrs+0x12b via ipu6   Genes Lists
• Linux 6.12.4 - crash dma_alloc_attrs+0x12b via ipu6   Genes Lists
• Fi.CI.CHECKPATCH: warning for compiler.h: refactor __is_constexpr() into is_const{, _true, _false}()   Vincent Mailhol
• [PATCH 00/10] compiler.h: refactor __is_constexpr() into is_const{, _true, _false}()   Vincent Mailhol
• [PATCH 01/10] compiler.h: add statically_false()   Vincent Mailhol
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol
• [PATCH 03/10] compiler.h: add is_const_true() and is_const_false()   Vincent Mailhol
• [PATCH 04/10] linux/bits.h: simplify GENMASK_INPUT_CHECK() by using is_const_true()   Vincent Mailhol
• [PATCH 05/10] minmax: simplify __clamp_once() by using is_const_false()   Vincent Mailhol
• [PATCH 06/10] fortify: replace __is_constexpr() by is_const() in strlen()   Vincent Mailhol
• [PATCH 08/10] drm/i915/reg: replace __is_const_expr() by is_const_true() or is_const()   Vincent Mailhol
• [PATCH 01/10] compiler.h: add statically_false()   Vincent Mailhol
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol
• [PATCH 05/10] minmax: simplify __clamp_once() by using is_const_false()   Vincent Mailhol
• [PATCH 0/2] LOBF enablement fix   Animesh Manna
• [PATCH 1/2] drm/i915/lobf: Add lobf enablement in post plane update   Animesh Manna
• [PATCH 2/2] drm/i915/lobf: Add debug print for LOBF   Animesh Manna
• [PATCH v2 0/2] LOBF enablement fix   Animesh Manna
• [PATCH v2 1/2] drm/i915/lobf: Add lobf enablement in post plane update   Animesh Manna
• [PATCH v2 2/2] drm/i915/lobf: Add debug print for LOBF   Animesh Manna
• [PATCH 1/2] drm/i915/lobf: Add lobf enablement in post plane update   Manna, Animesh
• [PATCH v2] drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY   Animesh Manna
• [PATCH v2 1/2] drm/i915/lobf: Add lobf enablement in post plane update   Manna, Animesh
• [PATCH v2 0/2] LOBF enablement fix   Manna, Animesh
• [PATCH v2 1/2] drm/i915/lobf: Add lobf enablement in post plane update   Manna, Animesh
• [PATCH v2 1/2] drm/i915/lobf: Add lobf enablement in post plane update   Manna, Animesh
• [PATCH v2] drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY   Manna, Animesh
• Regression on linux-next (next-20241120) and drm-tip   Lucas De Marchi
• Regression on linux-next (next-20241120) and drm-tip   Lucas De Marchi
• [PATCH] usb: typec: ucsi: Fix connector status writing past buffer size   Lucas De Marchi
• [RFT] Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING."   Lucas De Marchi
• [RFT] Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING."   Lucas De Marchi
• [core-for-CI] Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING."   Lucas De Marchi
• [PATCH 0/1] drm/amdgpu: Use device wedged event   Lucas De Marchi
• [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats   Lucas De Marchi
• [PATCH] drm/i915: Update license on selftest lists to MIT   Ed Maste
• [PATCH] drm/i915: Update license on selftest lists to MIT   Ed Maste
• [PATCH] drm/i915/pps: debug log the remaining power cycle delay to wait   Paul Menzel
• [PATCH] drm/i915/pps: include panel power cycle delay in debugfs   Paul Menzel
• [PATCH 1/7] vsprintf: Add %pTN to print task name   Petr Mladek
• [PATCH 5/7] security: Replace get_task_comm() with %pTN   Paul Moore
• [PATCHv9 00/10] Display Global Histogram   Arun R Murthy
• [PATCH 01/10] drm/crtc: Add histogram properties   Arun R Murthy
• [PATCH 02/10] drm/crtc: Expose API to create drm crtc property for histogram   Arun R Murthy
• [PATCHv2 03/10] drm/i915/histogram: Define registers for histogram   Arun R Murthy
• [PATCHv5 04/10] drm/i915/histogram: Add support for histogram   Arun R Murthy
• [PATCH 05/10] drm/xe: Add histogram support to Xe builds   Arun R Murthy
• [PATCHv5 06/10] drm/i915/histogram: histogram interrupt handling   Arun R Murthy
• [PATCH 07/10] drm/i915/display: handle drm-crtc histogram property updates   Arun R Murthy
• [PATCHv3 08/10] drm/i915/histogram: histogram delay counter doesnt reset   Arun R Murthy
• [PATCHv6 09/10] drm/i915/histogram: Histogram changes for Display 20+   Arun R Murthy
• [PATCH 10/10] drm/i915/histogram: Enable pipe dithering   Arun R Murthy
• [PATCHv2 01/10] drm/crtc: Add histogram properties   Arun R Murthy
• [PATCHv2 07/10] drm/i915/display: handle drm-crtc histogram property updates   Arun R Murthy
• [PATCHv2 01/10] drm/crtc: Add histogram properties   Murthy, Arun R
• [PATCHv2 01/10] drm/crtc: Add histogram properties   Murthy, Arun R
• [PATCHv2 01/10] drm/crtc: Add histogram properties   Murthy, Arun R
• [PATCHv10 00/10] Display Global Histogram   Arun R Murthy
• [PATCHv3 01/10] drm/crtc: Add histogram properties   Arun R Murthy
• [PATCHv3 02/10] drm/crtc: Expose API to create drm crtc property for histogram   Arun R Murthy
• [PATCH 03/10] drm/i915/histogram: Define registers for histogram   Arun R Murthy
• [PATCH 04/10] drm/i915/histogram: Add support for histogram   Arun R Murthy
• [PATCH 05/10] drm/xe: Add histogram support to Xe builds   Arun R Murthy
• [PATCH 06/10] drm/i915/histogram: histogram interrupt handling   Arun R Murthy
• [PATCHv3 07/10] drm/i915/display: Handle drm-crtc histogram property updates   Arun R Murthy
• [PATCH 08/10] drm/i915/histogram: histogram delay counter doesnt reset   Arun R Murthy
• [PATCH 09/10] drm/i915/histogram: Histogram changes for Display 20+   Arun R Murthy
• [PATCHv2 10/10] drm/i915/histogram: Enable pipe dithering   Arun R Murthy
• [PATCHv3 01/10] drm/crtc: Add histogram properties   Murthy, Arun R
• [PATCHv10 00/10] Display Global Histogram   Murthy, Arun R
• [PATCHv3 01/10] drm/crtc: Add histogram properties   Murthy, Arun R
• [PATCHv2 2/3] drm/plane: Expose function to create format/modifier blob   Murthy, Arun R
• [PATCH v7 0/4] Display Global Histogram   Arun R Murthy
• [PATCH v7 1/4] drm: Define histogram structures exposed to user   Arun R Murthy
• [PATCH v7 2/4] drm: Define ImageEnhancemenT LUT structures exposed to user   Arun R Murthy
• [PATCH v7 3/4] drm/crtc: Expose API to create drm crtc property for histogram   Arun R Murthy
• [PATCH v7 4/4] drm/crtc: Expose API to create drm crtc property for IET LUT   Arun R Murthy
• [PATCH] drm/i915/guc: Update guc_err message to show outstanding g2h responses   Jesus Narvaez
• [PATCH 00/14] DP DSC min/max src bpc fixes   Ankit Nautiyal
• [PATCH 01/14] drm/i915/dp: Refactor FEC support check in intel_dp_supports_dsc   Ankit Nautiyal
• [PATCH 02/14] drm/i915/dp: Return early if DSC not supported   Ankit Nautiyal
• [PATCH 03/14] drm/i915/dp: Separate out helper for compute fec_enable   Ankit Nautiyal
• [PATCH 04/14] drm/i915/dp: Drop check for FEC in intel_dp_fec_compute_config   Ankit Nautiyal
• [PATCH 05/14] drm/i915/dp: Remove HAS_DSC macro for intel_dp_dsc_max_src_input_bpc   Ankit Nautiyal
• [PATCH 06/14] drm/i915/dp: Return int from dsc_max/min_src_input_bpc helpers   Ankit Nautiyal
• [PATCH 07/14] drm/i915/dp: Use intel_display in intel_dp_dsc_max_src_input_bpc()   Ankit Nautiyal
• [PATCH 08/14] drm/i915/dp_mst: Use helpers to get dsc min/max input bpc   Ankit Nautiyal
• [PATCH 09/14] drm/i915/dp: Drop max_requested_bpc for dsc pipe_min/max bpp   Ankit Nautiyal
• [PATCH 10/14] drm/i915/dp: Refactor pipe_bpp limits with dsc   Ankit Nautiyal
• [PATCH 11/14] drm/i915/dp_mst: Refactor pipe_bpp limits with dsc for mst   Ankit Nautiyal
• [PATCH 12/14] drm/i915/dp: Use clamp for pipe_bpp limits with DSC   Ankit Nautiyal
• [PATCH 13/14] drm/i915/dp: Make dsc helpers accept const crtc_state pointers   Ankit Nautiyal
• [PATCH 14/14] drm/i915/dp: Set the DSC link limits intel_dp_compute_config_link_bpp_limits   Ankit Nautiyal
• [PATCH 00/14] DP DSC min/max src bpc fixes   Ankit Nautiyal
• [PATCH 01/14] drm/i915/dp: Refactor FEC support check in intel_dp_supports_dsc   Ankit Nautiyal
• [PATCH 02/14] drm/i915/dp: Return early if DSC not supported   Ankit Nautiyal
• [PATCH 03/14] drm/i915/dp: Separate out helper for compute fec_enable   Ankit Nautiyal
• [PATCH 04/14] drm/i915/dp: Drop check for FEC in intel_dp_fec_compute_config   Ankit Nautiyal
• [PATCH 05/14] drm/i915/dp: Remove HAS_DSC macro for intel_dp_dsc_max_src_input_bpc   Ankit Nautiyal
• [PATCH 06/14] drm/i915/dp: Return int from dsc_max/min_src_input_bpc helpers   Ankit Nautiyal
• [PATCH 07/14] drm/i915/dp_mst: Use helpers to get dsc min/max input bpc   Ankit Nautiyal
• [PATCH 08/14] drm/i915/dp: Drop max_requested_bpc for dsc pipe_min/max bpp   Ankit Nautiyal
• [PATCH 09/14] drm/i915/dp: Refactor pipe_bpp limits with dsc   Ankit Nautiyal
• [PATCH 10/14] drm/i915/dp_mst: Use pipe_bpp->limits.{max/min}_bpp for dsc   Ankit Nautiyal
• [PATCH 11/14] drm/i915/dp: Use clamp for pipe_bpp limits with DSC   Ankit Nautiyal
• [PATCH 12/14] drm/i915/dp: Make dsc helpers accept const crtc_state pointers   Ankit Nautiyal
• [PATCH 13/14] drm/i915/dp: Set the DSC link limits in intel_dp_compute_config_link_bpp_limits   Ankit Nautiyal
• [PATCH 14/14] drm/i915/dp_mst: Use link.{min/max}_bpp_x16   Ankit Nautiyal
• [PATCH] drm/i915/hdcp: Remove log for HDMI HDCP LIC check   Nautiyal, Ankit K
• [PATCH 02/12] drm/i915/dp: Return early if DSC not supported   Nautiyal, Ankit K
• [PATCH v5 1/6] drm/i915/vrr: Add crtc_state dump for vrr.vsync params   Nautiyal, Ankit K
• [PATCH v5 2/6] drm/i915/vrr: Compute vrr.vsync_{start, end} during full modeset   Nautiyal, Ankit K
• [PATCH v5 4/6] drm/i915/dp: Compute as_sdp.vtotal based on vrr timings   Nautiyal, Ankit K
• [PATCH 2/5] drm/i915/display: Compute the scaler filter coefficients   Nautiyal, Ankit K
• [PATCH 3/5] drm/i915/display: Enable the second scaler for sharpness   Nautiyal, Ankit K
• [PATCH 4/5] drm/i915/display: Add registers and compute the strength   Nautiyal, Ankit K
• [PATCH] drm/i915/mst: use intel_dp_compute_config_limits() for DP MST   Nautiyal, Ankit K
• [PATCH 04/14] drm/i915/dp: Drop check for FEC in intel_dp_fec_compute_config   Nautiyal, Ankit K
• [PATCH 11/14] drm/i915/dp_mst: Refactor pipe_bpp limits with dsc for mst   Nautiyal, Ankit K
• [PATCH] drm/i915/cx0_phy: Fix C10 pll programming sequence   Nautiyal, Ankit K
• [RFC v2 1/6] drm/i915/scaler: Add and compute scaling factors   Nautiyal, Ankit K
• [RFC v2 2/6] drm/i915/scaler: Add member to track scaler user   Nautiyal, Ankit K
• [RFC v2 3/6] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler   Nautiyal, Ankit K
• [RFC v2 4/6] drm/i915/scaler: Compute scling factors for pipe scaler   Nautiyal, Ankit K
• [RFC v2 5/6] drm/i915/scaler: Check if vblank is sufficient for scaler   Nautiyal, Ankit K
• [RFC v2 6/6] drm/i915/dsc: Check if dsc prefill sufficient for vblank   Nautiyal, Ankit K
• [PATCH 02/14] drm/i915/dp: Return early if DSC not supported   Nautiyal, Ankit K
• [PATCH 00/14] DP DSC min/max src bpc fixes   Nautiyal, Ankit K
• [PATCH 1/6] drm/i915/wm: Initialize max_latency variable to appropriate value   Jani Nikula
• ✗ Fi.CI.BUILD: failure for drm/i915: Add drm_panic support   Jani Nikula
• [PATCH 1/2] drm/i915/lobf: Add lobf enablement in post plane update   Jani Nikula
• [PATCH 01/10] drm/connector: add mutex to protect ELD from concurrent access   Jani Nikula
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Jani Nikula
• [PATCH] drm/i915/display: remove unused for_each_crtc()   Jani Nikula
• [PATCH] drm/i915/display: replace dig_port->saved_port_bits with flags   Jani Nikula
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Jani Nikula
• [PATCH] drm/i915/display: remove unused for_each_crtc()   Jani Nikula
• [PATCH v2] drm/i915/selftests: Add delay to stabilize frequency in live_rps_power   Jani Nikula
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Jani Nikula
• [PATCH v5] drm/i915: Fix NULL pointer dereference in capture_engine   Jani Nikula
• [PATCH 06/10] drm/i915/audio: use eld_mutex to protect access to connector->eld   Jani Nikula
• [PATCH v2 0/3] drm/dp: extract payload helpers   Jani Nikula
• [PATCH v2 1/3] drm/dp: extract drm_dp_dpcd_poll_act_handled()   Jani Nikula
• [PATCH v2 2/3] drm/dp: extract drm_dp_dpcd_write_payload()   Jani Nikula
• [PATCH v2 3/3] drm/dp: extract drm_dp_dpcd_clear_payload()   Jani Nikula
• [PATCH] drm/i915/hdcp: Disable HDCP Line Rekeying for HDCP2.2 on HDMI   Jani Nikula
• [PATCH 0/6] drm/i915/lspcon: interface cleanups   Jani Nikula
• [PATCH 1/6] drm/i915/hdmi: move declarations for hsw_read/write_infoframe() to the right place   Jani Nikula
• [PATCH 2/6] drm/i915/lspcon: add intel_lspcon_active() and use it   Jani Nikula
• [PATCH 3/6] drm/i915/lspcon: change signature of lspcon_detect_hdr_capability()   Jani Nikula
• [PATCH 4/6] drm/i915/lspcon: change signature of lspcon_wait_pcon_mode()   Jani Nikula
• [PATCH 5/6] drm/i915/lspcon: remove dp_to_lspcon(), hide enc_to_intel_lspcon()   Jani Nikula
• [PATCH 6/6] drm/i915/lspcon: rename interfaces to intel_lspcon_* to unify   Jani Nikula
• [PATCH] drm/i915/cx0: split out mtl_get_cx0_buf_trans() to c10 and c20 variants   Jani Nikula
• [PATCH] drm/i915/display: convert intel_display_driver.[ch] to struct intel_display   Jani Nikula
• [PATCH v6] drm/i915: Fix NULL pointer dereference in capture_engine   Jani Nikula
• [PATCH v6 0/2] drm/i915/display: Power request asserting/deasserting   Jani Nikula
• [PATCH v2 0/3] drm: remove driver date   Jani Nikula
• [PATCH v2 1/3] drm/xen: remove redundant initialization info print   Jani Nikula
• [PATCH v2 2/3] accel/ivpu: remove DRIVER_DATE conditional drm_driver init   Jani Nikula
• [PATCH v2 3/3] drm: remove driver date from struct drm_driver and all drivers   Jani Nikula
• [PATCH v2 0/5] drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases   Jani Nikula
• [PATCH v2 1/5] drm/i915/hdmi: propagate errors from intel_hdmi_init_connector()   Jani Nikula
• [PATCH v2 2/5] drm/i915/hdmi: add error handling in g4x_hdmi_init()   Jani Nikula
• [PATCH v2 3/5] drm/i915/ddi: propagate errors from intel_ddi_init_hdmi_connector()   Jani Nikula
• [PATCH v2 4/5] drm/i915/display: add intel_encoder_is_hdmi()   Jani Nikula
• [PATCH v2 5/5] drm/i915/ddi: only call shutdown hooks for valid encoders   Jani Nikula
• [PATCH 0/3] drm/i915/display: handle hdmi connector init failures   Jani Nikula
• [core-for-CI] nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary   Jani Nikula
• [PATCH] drm/i915/pps: debug log the remaining power cycle delay to wait   Jani Nikula
• ✗ i915.CI.BAT: failure for drm: remove driver date   Jani Nikula
• [PATCH] drm/i915/display: clean up DP Adaptive Sync SDP state mismatch logging   Jani Nikula
• [PATCH 0/3] drm: add drm_printer based hex dumper and use it   Jani Nikula
• [PATCH 1/3] drm/print: add drm_print_hex_dump()   Jani Nikula
• [PATCH 2/3] drm/i915/display: use drm_print_hex_dump() for crtc state dump   Jani Nikula
• [PATCH 3/3] drm/i915/display: use drm_print_hex_dump() for buffer mismatch dumps   Jani Nikula
• [PATCH v2 0/3] drm: remove driver date   Jani Nikula
• [PATCH] drm/i915/pps: include panel power cycle delay in debugfs   Jani Nikula
• [PATCH 2/3] drm/i915/display: use drm_print_hex_dump() for crtc state dump   Jani Nikula
• [PATCH 0/5] drm/i915/dsi: add some missing dphy configuration   Jani Nikula
• [PATCH 1/5] drm/i915/dsi: fix PIX_FMT_MASK width   Jani Nikula
• [PATCH 2/5] drm/i915/dsi: convert DSI_TRANS_FUNC_CONF to REG_BIT() and friends   Jani Nikula
• [PATCH 3/5] drm/i915/dsi: add LP_CLOCK_DURING_LPM bit for DSI_TRANS_FUNC_CONF   Jani Nikula
• [PATCH 4/5] drm/i915/vbt: define a few more DSI dphy config bits   Jani Nikula
• [PATCH 5/5] drm/i915/dsi: set a few DSI_TRANS_FUNC_CONF bits according to VBT   Jani Nikula
• [PATCH v2 0/3] drm: fix and enable warnings on unused static inlines   Jani Nikula
• [PATCH v2 1/3] drm/bridge: dw-hdmi-i2s: annotate hdmi_read() with __maybe_unused   Jani Nikula
• [PATCH v2 2/3] drm: renesas: rcar-du: annotate rcar_cmm_read() with __maybe_unused   Jani Nikula
• [PATCH v2 3/3] drm: enable warnings on unused static inlines   Jani Nikula
• [PATCH] drm/i915/display: convert intel_display_driver.[ch] to struct intel_display   Jani Nikula
• [PATCH 0/5] drm/xe/display: Rework display init for reducing flickering.   Jani Nikula
• [PATCH 1/3] drm/print: add drm_print_hex_dump()   Jani Nikula
• Linux 6.12.4 - crash dma_alloc_attrs+0x12b via ipu6   Jani Nikula
• [PATCH v2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   Jani Nikula
• [PATCH] drm/i915/pps: debug log the remaining power cycle delay to wait   Jani Nikula
• [PATCH] drm/i915/pps: include panel power cycle delay in debugfs   Jani Nikula
• [PATCH] drm/xe/display: Use a single early init call for display   Jani Nikula
• [PATCH v2 0/5] drm/i915/dp: convert to struct intel_display   Jani Nikula
• [PATCH v2 1/5] drm/i915/dp: s/intel_encoder/encoder/   Jani Nikula
• [PATCH v2 2/5] drm/i915/dp: s/intel_connector/connector/   Jani Nikula
• [PATCH v2 3/5] drm/i915/dp: convert to struct intel_display   Jani Nikula
• [PATCH v2 4/5] drm/i915/dp: convert interfaces to struct intel_display   Jani Nikula
• [PATCH v2 5/5] drm/i915/dp: finish link training conversion to struct intel_display   Jani Nikula
• [PATCH] drm/i915/mst: add beginnings of DP MST documentation   Jani Nikula
• Linux 6.12.4 - crash dma_alloc_attrs+0x12b via ipu6   Jani Nikula
• [PATCH 1/3] drm/print: add drm_print_hex_dump()   Jani Nikula
• [PATCH] drm/i915/display: clean up DP Adaptive Sync SDP state mismatch logging   Jani Nikula
• [PATCH 1/2] drm/i915/dp: add g4x_dp_compute_config()   Jani Nikula
• [PATCH 2/2] drm/i915/dp: move g4x_dp_set_clock() call to g4x_dp_compute_config()   Jani Nikula
• [PATCH] drm/i915/mst: use intel_dp_compute_config_limits() for DP MST   Jani Nikula
• [PATCH 2/2] drm/i915/dp: move g4x_dp_set_clock() call to g4x_dp_compute_config()   Jani Nikula
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Jani Nikula
• [PATCH v4 0/4] Implement Wa_14022698537   Jani Nikula
• [PATCH v3 01/11] drm/connector: Add a way to init/add a connector in separate steps   Jani Nikula
• [PATCH v3 02/11] drm/connector: Add FIXME for GETRESOURCES ioctl wrt. uninited connectors   Jani Nikula
• [PATCH v3 03/11] drm/connector: Add deprication notes for drm_connector_register/unregister   Jani Nikula
• [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()   Jani Nikula
• [PATCH v3 05/11] drm/i915/dp_mst: Expose a connector to kernel users after it's properly initialized   Jani Nikula
• [PATCH v3 06/11] drm/amd/dp_mst: Expose a connector to kernel users after it's properly initialized   Jani Nikula
• [PATCH v3 07/11] drm/nouveau/dp_mst: Expose a connector to kernel users after it's properly initialized   Jani Nikula
• [PATCH v3 08/11] drm/connector: Warn if a connector is registered/added incorrectly   Jani Nikula
• [PATCH v3 10/11] drm/i915/dp_mst: Fix error handling while adding a connector   Jani Nikula
• [PATCH v3 11/11] drm/i915/dp_mst: Use intel_connector vs. drm_connector pointer in intel_dp_mst.c   Jani Nikula
• [PATCH v2 3/5] drm/i915/dp: convert to struct intel_display   Jani Nikula
• b4 Merge patch series (was: Re: [PATCH v4 0/4] Implement Wa_14022698537)   Jani Nikula
• [PATCH 11/14] drm/i915/dp_mst: Refactor pipe_bpp limits with dsc for mst   Jani Nikula
• [PATCH v3 0/5] drm/i915/dp: convert to struct intel_display   Jani Nikula
• [PATCH v3 1/5] drm/i915/dp: s/intel_encoder/encoder/   Jani Nikula
• [PATCH v3 2/5] drm/i915/dp: s/intel_connector/connector/   Jani Nikula
• [PATCH v3 3/5] drm/i915/dp: convert to struct intel_display   Jani Nikula
• [PATCH v3 4/5] drm/i915/dp: convert interfaces to struct intel_display   Jani Nikula
• [PATCH v3 5/5] drm/i915/dp: finish link training conversion to struct intel_display   Jani Nikula
• [RFC v0 00/13] drm/i915/dp: 128b/132b uncompressed SST   Jani Nikula
• [RFC v0 01/13] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Jani Nikula
• [RFC v0 02/13] drm/i915/mst: use intel_dp_compute_config_limits() for DP MST   Jani Nikula
• [RFC v0 03/13] drm/i915/mst: drop connector parameter from intel_dp_mst_bw_overhead()   Jani Nikula
• [RFC v0 04/13] drm/i915/mst: drop connector parameter from intel_dp_mst_compute_m_n()   Jani Nikula
• [RFC v0 05/13] drm/i915/mst: change return value of mst_stream_find_vcpi_slots_for_bpp()   Jani Nikula
• [RFC v0 06/13] drm/i915/mst: add helper independent of MST for figuring out the TU   Jani Nikula
• [RFC v0 07/13] drm/i915/ddi: enable 128b/132b TRANS_DDI_FUNC_CTL mode for UHBR SST   Jani Nikula
• [RFC v0 08/13] drm/i915/ddi: 128b/132b SST also needs DP_TP_CTL_MODE_MST   Jani Nikula
• [RFC v0 09/13] drm/i915/ddi: write payload for 128b/132b SST   Jani Nikula
• [RFC v0 10/13] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers   Jani Nikula
• [RFC v0 11/13] drm/i915/ddi: enable ACT handling for 128b/132b SST   Jani Nikula
• [RFC v0 12/13] drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout   Jani Nikula
• [RFC v0 13/13] drm/i915/dp: compute config for 128b/132b SST w/o DSC   Jani Nikula
• [PATCH 1/3] drm/i915: split out i9xx_wm_regs.h   Jani Nikula
• [PATCH 2/3] drm/i915: relocate _VGA_MSR_WRITE register definition   Jani Nikula
• [PATCH 3/3] drm/i915: move DDI_CLK_VALFREQ next to other Cx0 PHY registers   Jani Nikula
• [PATCH] drm/i915/bios: add VBT DSI DSC debug logging   Jani Nikula
• [PATCH v3 0/6] drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases   Jani Nikula
• [PATCH v3 1/6] drm/i915/ddi: change intel_ddi_init_{dp, hdmi}_connector() return type   Jani Nikula
• [PATCH v3 2/6] drm/i915/hdmi: propagate errors from intel_hdmi_init_connector()   Jani Nikula
• [PATCH v3 3/6] drm/i915/hdmi: add error handling in g4x_hdmi_init()   Jani Nikula
• [PATCH v3 4/6] drm/i915/ddi: gracefully handle errors from intel_ddi_init_hdmi_connector()   Jani Nikula
• [PATCH v3 5/6] drm/i915/display: add intel_encoder_is_hdmi()   Jani Nikula
• [PATCH v3 6/6] drm/i915/ddi: only call shutdown hooks for valid encoders   Jani Nikula
• [PATCH v3 04/11] drm/dp_mst: Register connectors via drm_connector_dynamic_register()   Jani Nikula
• [PATCH v3 1/2] drm/i915/display: Add MTL subplatforms definition   Jani Nikula
• [PATCH] drm/i915/display: Do not report timeout on suspend   Jani Nikula
• [PATCH v3 1/6] drm/i915/ddi: change intel_ddi_init_{dp,hdmi}_connector() return type   Jani Nikula
• [PATCH 1/5] drm/sysfs: Constify 'struct bin_attribute'   Jani Nikula
• [PATCH 3/5] drm/i915: Constify 'struct bin_attribute'   Jani Nikula
• [PATCH] drm/i915/display: program DBUF_CTL tracker state service to 0x8   Jani Nikula
• [PATCH 1/3] drm/i915: split out i9xx_wm_regs.h   Jani Nikula
• [PATCH] drm/i915/mst: use intel_dp_compute_config_limits() for DP MST   Jani Nikula
• [PATCH v3 0/5] drm/i915/dp: convert to struct intel_display   Jani Nikula
• [RESEND 6/6] drm/i915/display: drop i915_drv.h include from intel_display_trace.h   Jani Nikula
• [PATCH] drm/i915/display: drop unnecessary i915_drv.h includes   Jani Nikula
• [PATCH 01/14] drm/i915/dp: Refactor FEC support check in intel_dp_supports_dsc   Jani Nikula
• [PATCH 02/14] drm/i915/dp: Return early if DSC not supported   Jani Nikula
• [PATCH 03/14] drm/i915/dp: Separate out helper for compute fec_enable   Jani Nikula
• [PATCH 04/14] drm/i915/dp: Drop check for FEC in intel_dp_fec_compute_config   Jani Nikula
• [PATCH 02/14] drm/i915/dp: Return early if DSC not supported   Jani Nikula
• [PATCH v2] drm/i915/display: drop unnecessary i915_drv.h includes   Jani Nikula
• ✗ i915.CI.Full: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev2)   Jani Nikula
• [PATCH v2] drm/i915/display: drop unnecessary i915_drv.h includes   Jani Nikula
• [PATCH] drm/i915/dmc_wl: store register ranges in rodata   Jani Nikula
• [PATCH] drm/i915/gvt: store virtual_dp_monitor_edid in rodata   Jani Nikula
• [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt   Jani Nikula
• [PATCH v2 00/16] drm/i915/dp: 128b/132b uncompressed SST   Jani Nikula
• [PATCH v2 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Jani Nikula
• [PATCH v2 02/16] drm/i915/mst: drop connector parameter from intel_dp_mst_bw_overhead()   Jani Nikula
• [PATCH v2 03/16] drm/i915/mst: drop connector parameter from intel_dp_mst_compute_m_n()   Jani Nikula
• [PATCH v2 04/16] drm/i915/mst: change return value of mst_stream_find_vcpi_slots_for_bpp()   Jani Nikula
• [PATCH v2 05/16] drm/i915/mst: remove crtc_state->pbn   Jani Nikula
• [PATCH v2 06/16] drm/i915/mst: split out a helper for figuring out the TU   Jani Nikula
• [PATCH v2 07/16] drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST   Jani Nikula
• [PATCH v2 08/16] drm/i915/ddi: enable 128b/132b TRANS_DDI_FUNC_CTL mode for UHBR SST   Jani Nikula
• [PATCH v2 09/16] drm/i915/ddi: 128b/132b SST also needs DP_TP_CTL_MODE_MST   Jani Nikula
• [PATCH v2 10/16] drm/i915/ddi: write payload for 128b/132b SST   Jani Nikula
• [PATCH v2 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers   Jani Nikula
• [PATCH v2 12/16] drm/i915/ddi: enable ACT handling for 128b/132b SST   Jani Nikula
• [PATCH v2 13/16] drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout   Jani Nikula
• [PATCH v2 14/16] drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()   Jani Nikula
• [PATCH v2 15/16] drm/i915/ddi: disable trancoder port select for 128b/132b SST   Jani Nikula
• [PATCH v2 16/16] drm/i915/dp: compute config for 128b/132b SST w/o DSC   Jani Nikula
• [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate   Jani Nikula
• [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate   Jani Nikula
• [PATCH] drm/i915/dmc_wl: store register ranges in rodata   Jani Nikula
• [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs   Jani Nikula
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Jani Nikula
• [CI v3 0/6] drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases   Jani Nikula
• [CI v3 1/6] drm/i915/ddi: change intel_ddi_init_{dp, hdmi}_connector() return type   Jani Nikula
• [CI v3 2/6] drm/i915/hdmi: propagate errors from intel_hdmi_init_connector()   Jani Nikula
• [CI v3 3/6] drm/i915/hdmi: add error handling in g4x_hdmi_init()   Jani Nikula
• [CI v3 4/6] drm/i915/ddi: gracefully handle errors from intel_ddi_init_hdmi_connector()   Jani Nikula
• [CI v3 5/6] drm/i915/display: add intel_encoder_is_hdmi()   Jani Nikula
• [CI v3 6/6] drm/i915/ddi: only call shutdown hooks for valid encoders   Jani Nikula
• [RFC v2 5/6] drm/i915/scaler: Check if vblank is sufficient for scaler   Jani Nikula
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Jani Nikula
• [CI v3 2/6] drm/i915/hdmi: propagate errors from intel_hdmi_init_connector()   Jani Nikula
• [PATCH v3] drm/i915/cmtg: Disable the CMTG   Jani Nikula
• [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs   Jani Nikula
• [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout   Jani Nikula
• [PATCH 0/4] drm/i915/pmdemand: cleanups   Jani Nikula
• [PATCH 1/4] drm/i915/pmdemand: convert to_intel_pmdemand_state() to a function   Jani Nikula
• [PATCH 2/4] drm/i915/pmdemand: make struct intel_pmdemand_state opaque   Jani Nikula
• [PATCH 3/4] drm/i915/pmdemand: convert to struct intel_display   Jani Nikula
• [PATCH 4/4] drm/i915/display: convert global state to struct intel_display   Jani Nikula
• [PATCH v1] drm/i915/selftests: Add delay to stabilize frequency in live_rps_power   Nilawar, Badal
• [PATCH v2] drm/i915/selftests: Add delay to stabilize frequency in live_rps_power   Nilawar, Badal
• [PATCH v7] drm/i915/selftests: Implement frequency logging for energy reading validation   Nilawar, Badal
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Yury Norov
• ✗ Fi.CI.SPARSE: warning for Add AS_SDP to fastset (rev4)   Patchwork
• ✓ i915.CI.BAT: success for Add AS_SDP to fastset (rev4)   Patchwork
• ✗ i915.CI.Full: failure for Add AS_SDP to fastset (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/hdcp: Change log level for HDMI HDCP LIC check (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for LOBF enablement fix   Patchwork
• ✓ i915.CI.BAT: success for LOBF enablement fix   Patchwork
• ✓ i915.CI.BAT: success for Flush DMC wakelock release work at the end of runtime suspend (rev2)   Patchwork
• ✗ i915.CI.Full: failure for LOBF enablement fix   Patchwork
• ✗ i915.CI.Full: failure for Flush DMC wakelock release work at the end of runtime suspend (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: remove unused for_each_crtc()   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Async flip + compression, and some plane cleanups (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Async flip + compression, and some plane cleanups (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Async flip + compression, and some plane cleanups (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/selftests: Add delay to stabilize frequency in live_rps_power   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/display: remove unused for_each_crtc()   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Async flip + compression, and some plane cleanups (rev4)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/selftests: Add delay to stabilize frequency in live_rps_power   Patchwork
• ✗ Fi.CI.BUILD: failure for Display Global Histogram (rev9)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/selftests: Add delay to stabilize frequency in live_rps_power (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/selftests: Add delay to stabilize frequency in live_rps_power (rev2)   Patchwork
• ✗ Fi.CI.BUILD: failure for Regression on linux-next (next-20241120) and drm-tip   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [1/6] drm/i915/wm: Initialize max_latency variable to appropriate value   Patchwork
• ✓ i915.CI.BAT: success for series starting with [1/6] drm/i915/wm: Initialize max_latency variable to appropriate value   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Add drm_panic support (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Add drm_panic support (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for compiler.h: refactor __is_constexpr() into is_const{,_true,_false}()   Patchwork
• ✗ Fi.CI.SPARSE: warning for compiler.h: refactor __is_constexpr() into is_const{,_true,_false}()   Patchwork
• ✗ i915.CI.Full: failure for series starting with [1/6] drm/i915/wm: Initialize max_latency variable to appropriate value   Patchwork
• ✓ i915.CI.BAT: success for compiler.h: refactor __is_constexpr() into is_const{,_true,_false}()   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Add drm_panic support (rev2)   Patchwork
• ✗ i915.CI.Full: failure for compiler.h: refactor __is_constexpr() into is_const{,_true,_false}()   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Fix NULL pointer dereference in capture_engine (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Fix NULL pointer dereference in capture_engine (rev2)   Patchwork
• ✓ i915.CI.Full: success for drm/i915: Fix NULL pointer dereference in capture_engine (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Fix NULL pointer dereference in capture_engine (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: Fix NULL pointer dereference in capture_engine (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/dp: extract payload helpers (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/dp: extract payload helpers (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/dp_mst: Fix a few side-band message handling issues   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/dp_mst: Fix a few side-band message handling issues   Patchwork
• ✗ i915.CI.BAT: failure for drm/dp_mst: Fix a few side-band message handling issues   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/lspcon: interface cleanups   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/lspcon: interface cleanups   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/dp_mst: Fix a few side-band message handling issues (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/dp_mst: Fix a few side-band message handling issues (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/dp: extract payload helpers (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/dp_mst: Fix a few side-band message handling issues (rev2)   Patchwork
• ✗ Fi.CI.BUILD: failure for Regression on linux-next (next-20241120) and drm-tip (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for usb: typec: ucsi: Fix connector status writing past buffer size   Patchwork
• ✗ i915.CI.BAT: failure for usb: typec: ucsi: Fix connector status writing past buffer size   Patchwork
• ✓ i915.CI.BAT: success for drm/dp_mst: Fix a few side-band message handling issues (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary   Patchwork
• ✓ i915.CI.BAT: success for nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary   Patchwork
• ✗ i915.CI.Full: failure for drm/dp_mst: Fix a few side-band message handling issues (rev2)   Patchwork
• ✗ i915.CI.Full: failure for nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary   Patchwork
• ✗ i915.CI.BAT: failure for DP DSC min/max src bpc fixes (rev10)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: convert intel_display_driver.[ch] to struct intel_display   Patchwork
• ✗ Fi.CI.SPARSE: warning for LOBF enablement fix (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for LOBF enablement fix (rev2)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/display: convert intel_display_driver.[ch] to struct intel_display   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/dp_mst: Fix a few side-band message handling issues (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/dp_mst: Fix a few side-band message handling issues (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/dp_mst: Fix a few side-band message handling issues (rev3)   Patchwork
• ✓ i915.CI.Full: success for drm/dp_mst: Fix a few side-band message handling issues (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm: remove driver date   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm: remove driver date   Patchwork
• ✗ i915.CI.BAT: failure for drm: remove driver date   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases   Patchwork
• ✓ i915.CI.Full: success for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases   Patchwork
• ✓ i915.CI.BAT: success for drm: remove driver date   Patchwork
• ✓ i915.CI.Full: success for drm: remove driver date   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/selftest: Log throttle reasons on failure   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: clean up DP Adaptive Sync SDP state mismatch logging   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm: add drm_printer based hex dumper and use it   Patchwork
• ✓ i915.CI.BAT: success for drm: add drm_printer based hex dumper and use it   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/selftest: Log throttle reasons on failure   Patchwork
• ✓ i915.CI.BAT: success for series starting with [v1,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Patchwork
• ✓ i915.CI.Full: success for drm: add drm_printer based hex dumper and use it   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/pps: include panel power cycle delay in debugfs   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/mst: add beginnings of DP MST documentation (rev2)   Patchwork
• ✓ i915.CI.Full: success for series starting with [v1,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dsi: add some missing dphy configuration   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dsi: add some missing dphy configuration   Patchwork
• ✓ i915.CI.Full: success for drm/i915/pps: include panel power cycle delay in debugfs   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm: fix and enable warnings on unused static inlines (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm: fix and enable warnings on unused static inlines (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm: fix and enable warnings on unused static inlines (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for i915/gt: Reapply workarounds in case the previous attempt failed.   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/xe/display: Re-use display vmas when possible (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for i915/gt: Reapply workarounds in case the previous attempt failed.   Patchwork
• ✓ i915.CI.Full: success for drm: fix and enable warnings on unused static inlines (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/connector: add eld_mutex to protect connector->eld (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/connector: add eld_mutex to protect connector->eld (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset (rev2)   Patchwork
• ✓ i915.CI.Full: success for drm/connector: add eld_mutex to protect connector->eld (rev2)   Patchwork
• ✓ i915.CI.BAT: success for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for i915/gt: Reapply workarounds in case the previous attempt failed. (rev2)   Patchwork
• ✓ i915.CI.BAT: success for i915/gt: Reapply workarounds in case the previous attempt failed. (rev2)   Patchwork
• ✓ i915.CI.Full: success for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset (rev3)   Patchwork
• ✓ i915.CI.Full: success for i915/gt: Reapply workarounds in case the previous attempt failed. (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/xe/display: Re-use display vmas when possible (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/xe/display: Re-use display vmas when possible (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/xe/display: Rework display init for reducing flickering.   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/xe/display: Rework display init for reducing flickering.   Patchwork
• ✗ i915.CI.BAT: failure for drm/xe/display: Rework display init for reducing flickering.   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Update license on selftest lists to MIT   Patchwork
• ✗ Fi.CI.BUILD: failure for linux-next: build failure after merge of the drm-misc tree   Patchwork
• ✓ i915.CI.BAT: success for DP DSC min/max src bpc fixes (rev10)   Patchwork
• ✓ i915.CI.Full: success for DP DSC min/max src bpc fixes (rev10)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY (rev2)   Patchwork
• ✓ i915.CI.BAT: success for Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING."   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/pps: debug log the remaining power cycle delay to wait (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/xe/display: Rework display init for reducing flickering. (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/xe/display: Rework display init for reducing flickering. (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/xe/display: Rework display init for reducing flickering. (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Display Global Histogram (rev10)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Display Global Histogram (rev10)   Patchwork
• ✗ i915.CI.Full: failure for Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING."   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/pps: debug log the remaining power cycle delay to wait (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/xe/display: Rework display init for reducing flickering. (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Add drm_panic support (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Add drm_panic support (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: convert to struct intel_display (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Add drm_panic support (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: convert to struct intel_display (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: clean up DP Adaptive Sync SDP state mismatch logging (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Expose dsc sink max slice count via debugfs   Patchwork
• ✗ i915.CI.BAT: failure for Expose dsc sink max slice count via debugfs   Patchwork
• ✓ i915.CI.Full: success for drm/i915/dp: convert to struct intel_display (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/display: clean up DP Adaptive Sync SDP state mismatch logging (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: DSB+VRR   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: DSB+VRR   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: DSB+VRR   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: DSB+VRR   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: use IS_ERR_OR_NULL macro on DP tunnel mgr creation failure   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Implement Wa_14022698537 (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Implement Wa_14022698537 (rev3)   Patchwork
• ✓ i915.CI.BAT: success for Implement Wa_14022698537 (rev3)   Patchwork
• ✓ i915.CI.BAT: success for Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING." (rev2)   Patchwork
• ✓ i915.CI.BAT: success for series starting with [1/2] drm/i915/dp: add g4x_dp_compute_config()   Patchwork
• ✗ i915.CI.Full: failure for Implement Wa_14022698537 (rev3)   Patchwork
• ✗ i915.CI.Full: failure for Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING." (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/ci: uprev IGT (rev2)   Patchwork
• ✗ i915.CI.Full: failure for series starting with [1/2] drm/i915/dp: add g4x_dp_compute_config()   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/display: use ERR_PTR on DP tunnel manager creation fail   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/mst: use intel_dp_compute_config_limits() for DP MST   Patchwork
• ✓ i915.CI.BAT: success for drm/ci: uprev IGT (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/display: use ERR_PTR on DP tunnel manager creation fail   Patchwork
• ✗ i915.CI.Full: failure for drm/ci: uprev IGT (rev2)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/mst: use intel_dp_compute_config_limits() for DP MST   Patchwork
• ✓ i915.CI.Full: success for drm/display: use ERR_PTR on DP tunnel manager creation fail   Patchwork
• ✓ i915.CI.BAT: success for drm/xe/display: Program double buffered LUT registers   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/connector: Expose only a properly inited connector   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/connector: Expose only a properly inited connector   Patchwork
• ✓ i915.CI.BAT: success for drm/connector: Expose only a properly inited connector   Patchwork
• ✗ i915.CI.Full: failure for drm/xe/display: Program double buffered LUT registers   Patchwork
• ✗ i915.CI.Full: failure for drm/connector: Expose only a properly inited connector   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: Add WA_14018221282 (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/display: use ERR_PTR on DP tunnel manager creation fail (rev2)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/dp: Rework LTTPR transparent mode handling and add support to msm driver (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/display: use ERR_PTR on DP tunnel manager creation fail (rev3)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/display: Add WA_14018221282 (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for Consider joiner calculation for panel fitting (rev6)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/{i915,xe}: Convert to DRM client setup   Patchwork
• ✓ i915.CI.BAT: success for drm/{i915,xe}: Convert to DRM client setup   Patchwork
• ✗ i915.CI.Full: failure for drm/display: use ERR_PTR on DP tunnel manager creation fail (rev3)   Patchwork
• ✗ i915.CI.Full: failure for drm/{i915,xe}: Convert to DRM client setup   Patchwork
• ✗ Fi.CI.BUILD: failure for Extended Wake Timeout   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for PSR DSB support   Patchwork
• ✗ Fi.CI.SPARSE: warning for PSR DSB support   Patchwork
• ✗ i915.CI.BAT: failure for PSR DSB support   Patchwork
• ✗ Fi.CI.BUILD: failure for series starting with [PATCHv2,1/3] drm/plane: Add new plane property IN_FORMATS_ASYNC (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dsc: Expose dsc sink max slice count via debugfs   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: convert to struct intel_display (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dsc: Expose dsc sink max slice count via debugfs   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: 128b/132b uncompressed SST   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: convert to struct intel_display (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: 128b/132b uncompressed SST   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/3] drm/i915: split out i9xx_wm_regs.h   Patchwork
• ✓ i915.CI.BAT: success for series starting with [1/3] drm/i915: split out i9xx_wm_regs.h   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/xe3: do not configure auto min dbuf for cursor WMs   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/bios: add VBT DSI DSC debug logging   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/amdgpu: Use device wedged event   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev3)   Patchwork
• ✗ i915.CI.Full: failure for series starting with [1/3] drm/i915: split out i9xx_wm_regs.h   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/xe3: do not configure auto min dbuf for cursor WMs   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/selftests: Use preemption timeout on cleanup   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/guc: Update guc_err message to show outstanding g2h responses   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: DSB+VRR (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: DSB+VRR (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: DSB+VRR (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Async flip + compression, and some plane cleanups (rev5)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Async flip + compression, and some plane cleanups (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: Async flip + compression, and some plane cleanups (rev5)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/guc: Update guc_err message to show outstanding g2h responses   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/connector: make mode_valid() callback accept const mode pointer (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/connector: make mode_valid() callback accept const mode pointer (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/connector: make mode_valid() callback accept const mode pointer (rev2)   Patchwork
• ✓ i915.CI.BAT: success for PSR DSB support   Patchwork
• ✗ i915.CI.Full: failure for PSR DSB support   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/xe3: do not configure auto min dbuf for cursor WMs (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: convert to struct intel_display (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: convert to struct intel_display (rev4)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/xe3: do not configure auto min dbuf for cursor WMs (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/selftests: Use preemption timeout on cleanup   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm: Constify 'struct bin_attribute'   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm: Constify 'struct bin_attribute'   Patchwork
• ✗ i915.CI.BAT: failure for drm: Constify 'struct bin_attribute'   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/bios: add VBT DSI DSC debug logging (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dp: convert to struct intel_display (rev4)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/selftests: Use preemption timeout on cleanup   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/bios: add VBT DSI DSC debug logging (rev2)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/amdgpu: Use device wedged event (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Async flip + compression, and some plane cleanups (rev6)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Async flip + compression, and some plane cleanups (rev6)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Async flip + compression, and some plane cleanups (rev6)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for i915/gt: Reapply workarounds in case the previous attempt failed. (rev3)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/amdgpu: Use device wedged event   Patchwork
• ✓ i915.CI.BAT: success for i915/gt: Reapply workarounds in case the previous attempt failed. (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: program DBUF_CTL tracker state service to 0x8 (rev2)   Patchwork
• ✗ Fi.CI.BUILD: warning for drm/i915/display: drop unnecessary i915_drv.h includes   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: drop unnecessary i915_drv.h includes   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/cx0_phy: Fix C10 pll programming sequence   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Enable GuC SLPC default balancing strategies   Patchwork
• ✗ i915.CI.BAT: failure for Enable GuC SLPC default balancing strategies   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Async flip + compression, and some plane cleanups (rev6)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/slpc: Add sysfs for SLPC power profiles   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/slpc: Add sysfs for SLPC power profiles   Patchwork
• ✗ i915.CI.Full: failure for i915/gt: Reapply workarounds in case the previous attempt failed. (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/slpc: Add sysfs for SLPC power profiles   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/display: drop unnecessary i915_drv.h includes   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/cx0_phy: Fix C10 pll programming sequence   Patchwork
• ✓ i915.CI.BAT: success for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/slpc: Add sysfs for SLPC power profiles   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dsc: Expose dsc sink max slice count via debugfs   Patchwork
• ✓ i915.CI.Full: success for drm/i915/selftests: Use preemption timeout on cleanup   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/hdcp: Fix Repeater authentication during topology change   Patchwork
• ✗ i915.CI.Full: failure for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/xe3: FBC Dirty rect feature support (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/xe3: FBC Dirty rect feature support (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/xe3: FBC Dirty rect feature support (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for DP DSC min/max src bpc fixes (rev11)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dsc: Expose dsc sink max slice count via debugfs   Patchwork
• ✓ i915.CI.BAT: success for DP DSC min/max src bpc fixes (rev11)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/gt: Use ENGINE_TRACE for tracing. (rev5)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/hdcp: Fix Repeater authentication during topology change   Patchwork
• ✓ i915.CI.Full: success for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Patchwork
• ✗ i915.CI.Full: failure for DP DSC min/max src bpc fixes (rev11)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/gt: Use ENGINE_TRACE for tracing. (rev5)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: drop unnecessary i915_drv.h includes (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: UHBR rates for Thunderbolt   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: UHBR rates for Thunderbolt   Patchwork
• ✓ i915.CI.BAT: success for drm/ci: uprev IGT (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: Don't program DBUF_CTL tracker state service   Patchwork
• ✗ Fi.CI.SPARSE: warning for Check if is vblank too short   Patchwork
• ✗ i915.CI.BAT: failure for Check if is vblank too short   Patchwork
• ✗ i915.CI.BAT: failure for Enable GuC SLPC default balancing strategies (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev4)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/display: drop unnecessary i915_drv.h includes (rev2)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/display: UHBR rates for Thunderbolt   Patchwork
• ✗ i915.CI.Full: failure for drm/ci: uprev IGT (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dmc_wl: store register ranges in rodata   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gvt: store virtual_dp_monitor_edid in rodata   Patchwork
• ✗ Fi.CI.SPARSE: warning for Display Global Histogram (rev11)   Patchwork
• ✓ i915.CI.Full: success for DP DSC min/max src bpc fixes (rev11)   Patchwork
• ✓ i915.CI.BAT: success for Display Global Histogram (rev11)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gt: Use ENGINE_TRACE for tracing. (rev6)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dmc_wl: store register ranges in rodata   Patchwork
• ✗ i915.CI.Full: failure for Display Global Histogram (rev11)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/gt: Use ENGINE_TRACE for tracing. (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gvt: store virtual_dp_monitor_edid in rodata (rev2)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/cx0_phy: Fix C10 pll programming sequence   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/scaler: Scaler cleanups and tracepoints   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/scaler: Scaler cleanups and tracepoints   Patchwork
• ✗ Fi.CI.BUILD: failure for Remove get_task_comm() and print task comm directly   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for annotate i915_gem_object_trylock() as __must_check   Patchwork
• ✗ Fi.CI.SPARSE: warning for annotate i915_gem_object_trylock() as __must_check   Patchwork
• ✗ i915.CI.BAT: failure for annotate i915_gem_object_trylock() as __must_check   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: Don't program DBUF_CTL tracker state service (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/gt: Use ENGINE_TRACE for tracing. (rev7)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: 128b/132b uncompressed SST (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: 128b/132b uncompressed SST (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dg1: Fix power gate sequence. (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: 128b/132b uncompressed SST (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: Reduce global state funcs boilerplate   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: Reduce global state funcs boilerplate   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: Reduce global state funcs boilerplate   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dmc_wl: Support extra values for dmc_wl_enable for debugging   Patchwork
• ✗ Fi.CI.BUILD: failure for Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/scaler: Scaler cleanups and tracepoints   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gvt: store virtual_dp_monitor_edid in rodata (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gt: Log reason for setting TAINT_WARN at reset   Patchwork
• ✓ i915.CI.Full: success for drm/i915/display: Don't program DBUF_CTL tracker state service (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dg1: Fix power gate sequence. (rev3)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/dp: 128b/132b uncompressed SST (rev2)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/display: Reduce global state funcs boilerplate   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dmc_wl: Support extra values for dmc_wl_enable for debugging   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gt: Log reason for setting TAINT_WARN at reset (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gt: Log reason for setting TAINT_WARN at reset (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/gt: Log reason for setting TAINT_WARN at reset (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: Add debug print about hw config table size   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/uc: Include requested frequency in slow firmware load messages   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/gt: Log reason for setting TAINT_WARN at reset (rev4)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cmtg: Disable the CMTG   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cmtg: Disable the CMTG   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/cmtg: Disable the CMTG (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cmtg: Disable the CMTG (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cmtg: Disable the CMTG (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/cmtg: Disable the CMTG (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: Add WA_14018221282 (rev4)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/cmtg: Disable the CMTG (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/gt: Add GEM_BUG_ON to ensure at least one engine supports migration   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/gt: Add GEM_BUG_ON to ensure at least one engine supports migration   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gt: Prevent uninitialized pointer reads   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: Remove deadcode   Patchwork
• ✗ i915.CI.BAT: failure for series starting with [1/3] drm/i915: Remove deadcode   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/gt: Add GEM_BUG_ON to ensure at least one engine supports migration   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: Remove deadcode (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for series starting with [1/3] drm/i915: Remove deadcode (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/uc: Include requested frequency in slow firmware load messages (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: Remove deadcode (rev3)   Patchwork
• ✓ i915.CI.BAT: success for series starting with [1/3] drm/i915: Remove deadcode (rev3)   Patchwork
• ✗ i915.CI.Full: failure for series starting with [1/3] drm/i915: Remove deadcode (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: Remove deadcode (rev4)   Patchwork
• ✓ i915.CI.BAT: success for series starting with [1/3] drm/i915: Remove deadcode (rev4)   Patchwork
• ✗ i915.CI.Full: failure for series starting with [1/3] drm/i915: Remove deadcode (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gvt: store virtual_dp_monitor_edid in rodata (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev5)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev6)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev6)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/pmdemand: cleanups   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/pmdemand: cleanups   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/pmdemand: cleanups   Patchwork
• [PATCH 0/7] drm/dp_mst: Fix a few side-band message handling issues   Lyude Paul
• [PATCH v2 0/3] drm/dp: extract payload helpers   Lyude Paul
• [PATCH v3 01/11] drm/connector: Add a way to init/add a connector in separate steps   Lyude Paul
• [PATCH v2 5/5] drm/connector: make mode_valid take a const struct drm_display_mode   Lyude Paul
• [PATCH v2 1/5] drm/encoder_slave: make mode_valid accept const struct drm_display_mode   Lyude Paul
• [PATCH 6/7] drivers: Repace get_task_comm() with %pTN   Lyude Paul
• [PATCH v2 2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode   Lyude Paul
• [PATCH 1/7] vsprintf: Add %pTN to print task name   Borislav Petkov
• [PATCH v2 2/3] drm: renesas: rcar-du: annotate rcar_cmm_read() with __maybe_unused   Laurent Pinchart
• [PATCH v3 06/10] mtd: intel-dg: wake card on operations   Poosa, Karthik
• [PATCH v1] drm/ci: uprev IGT   Vignesh Raman
• [PATCH v1] drm/ci: uprev IGT   Vignesh Raman
• [PATCH v1] drm/ci: uprev IGT   Vignesh Raman
• [PATCH v2] drm/ci: uprev IGT   Vignesh Raman
• ✗ i915.CI.Full: failure for Fix some races/bugs in GuC engine busyness (rev4)   Umesh Nerlige Ramappa
• [PATCH 0/3] Fix some races/bugs in GuC engine busyness   Umesh Nerlige Ramappa
• RE: ✗ i915.CI.BAT: failure for drm/dp_mst: Fix a few side-band message handling issues   Ravali, JupallyX
• RE: ✗ i915.CI.BAT: failure for drm: remove driver date   Ravali, JupallyX
• RE: ✗ i915.CI.BAT: failure for drm/i915/selftests: Use preemption timeout on cleanup   Ravali, JupallyX
• RE: ✗ i915.CI.Full: failure for drm/i915/selftests: Use preemption timeout on cleanup   Ravali, JupallyX
• RE: ✗ i915.CI.Full: failure for series starting with [v2,1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Ravali, JupallyX
• RE: ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev3)   Ravali, JupallyX
• [PATCH v3 06/10] mtd: intel-dg: wake card on operations   Miquel Raynal
• [PATCH v3 06/10] mtd: intel-dg: wake card on operations   Miquel Raynal
• [PATCH] usb: typec: ucsi: Fix connector status writing past buffer size   Sebastian Reichel
• [PATCH 00/10] compiler.h: refactor __is_constexpr() into is_const{,_true,_false}()   Vincent Mailhol via B4 Relay
• [PATCH 01/10] compiler.h: add statically_false()   Vincent Mailhol via B4 Relay
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Vincent Mailhol via B4 Relay
• [PATCH 03/10] compiler.h: add is_const_true() and is_const_false()   Vincent Mailhol via B4 Relay
• [PATCH 04/10] linux/bits.h: simplify GENMASK_INPUT_CHECK() by using is_const_true()   Vincent Mailhol via B4 Relay
• [PATCH 05/10] minmax: simplify __clamp_once() by using is_const_false()   Vincent Mailhol via B4 Relay
• [PATCH 06/10] fortify: replace __is_constexpr() by is_const() in strlen()   Vincent Mailhol via B4 Relay
• [PATCH 07/10] overflow: replace __is_constexpr() by is_const()   Vincent Mailhol via B4 Relay
• [PATCH 08/10] drm/i915/reg: replace __is_const_expr() by is_const_true() or is_const()   Vincent Mailhol via B4 Relay
• [PATCH 09/10] coresight: etm4x: replace __is_const_expr() by is_const()   Vincent Mailhol via B4 Relay
• [PATCH 10/10] compiler.h: remove __is_constexpr()   Vincent Mailhol via B4 Relay
• [PATCH 00/10] drm/connector: add eld_mutex to protect connector->eld   Maxime Ripard
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Maxime Ripard
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Maxime Ripard
• [PATCH 00/10] drm/connector: add eld_mutex to protect connector->eld   Maxime Ripard
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Maxime Ripard
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Maxime Ripard
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Maxime Ripard
• [PULL] drm-misc-next   Maxime Ripard
• [PATCH v10 1/4] drm: Introduce device wedged event   Maxime Ripard
• [PULL] drm-misc-next   Maxime Ripard
• [PATCH v3 09/11] drm/tests: Add tests for drm_connector_dynamic_init()/register()   Maxime Ripard
• [PATCH v3 01/11] drm/connector: Add a way to init/add a connector in separate steps   Maxime Ripard
• [PATCH v3 0/7] drm/connector: Expose only a properly inited connector   Maxime Ripard
• [PATCH v2 00/10] drm/connector: add eld_mutex to protect connector->eld   Maxime Ripard
• [PATCH v10 1/4] drm: Introduce device wedged event   Maxime Ripard
• [PULL] drm-misc-next   Maxime Ripard
• [PATCHv10 00/10] Display Global Histogram   Matt Roper
• [PATCHv10 00/10] Display Global Histogram   Matt Roper
• [PATCH] drm/i915/display: Add WA_14018221282   Matt Roper
• [RFC PATCH] i915/gt: Reapply workarounds in case the previous attempt failed.   Matt Roper
• [PATCH v2] i915/gt: Reapply workarounds in case the previous attempt failed.   Matt Roper
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Matt Roper
• linux-next: build failure after merge of the drm-misc tree   Stephen Rothwell
• linux-next: manual merge of the drm-intel tree with Linus' tree   Stephen Rothwell
• linux-next: manual merge of the drm-intel tree with the drm-misc tree   Stephen Rothwell
• linux-next: build warnings after merge of the drm-misc tree   Stephen Rothwell
• Regression on linux-next (next-20241120) and drm-tip   Saarinen, Jani
• [PATCH 0/3] drm/i915/display: handle hdmi connector init failures   Sergey Senozhatsky
• [PATCH v2 0/5] drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases   Sergey Senozhatsky
• [PATCH v3 0/6] drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases   Sergey Senozhatsky
• [PATCH v3 0/6] drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases   Sergey Senozhatsky
• [v2 02/25] drm: Add support for 3x3 CTM   Shankar, Uma
• [v2 05/25] drm: Add Color ops capability property   Shankar, Uma
• [v2 07/25] drm: Add 1D LUT multi-segmented color op   Shankar, Uma
• [v2 09/25] drm: Add helper to initialize segmented 1D LUT   Shankar, Uma
• [PATCH v2 1/3] drm/i915/display: update to plane_wm register access function   Shankar, Uma
• [PATCH v2 2/3] drm/i915/display: update to relative data rate handling   Shankar, Uma
• [PATCH v2 3/3] drm/i915/xe3: Use hw support for min/interim ddb allocations for async flip   Shankar, Uma
• [PATCH] drm/i915/xe3: do not configure auto min dbuf for cursor WMs   Shankar, Uma
• [PATCH 0/7] vsprintf: Add %pTN to print Task Name   Yafang Shao
• [PATCH 1/7] vsprintf: Add %pTN to print task name   Yafang Shao
• [PATCH 2/7] kernel: Replace get_task_comm() with %pTN   Yafang Shao
• [PATCH 3/7] arch: Replace get_task_comm() with %pTN   Yafang Shao
• [PATCH 4/7] net: Replace get_task_comm() with %pTN   Yafang Shao
• [PATCH 5/7] security: Replace get_task_comm() with %pTN   Yafang Shao
• [PATCH 6/7] drivers: Repace get_task_comm() with %pTN   Yafang Shao
• [PATCH 7/7] fs: Use %pTN to print task name   Yafang Shao
• [PATCH 1/7] vsprintf: Add %pTN to print task name   Yafang Shao
• [PATCH v2 0/5] Remove get_task_comm() and print task comm directly   Yafang Shao
• [PATCH v2 1/5] kernel: Remove get_task_comm() and print task comm directly   Yafang Shao
• [PATCH v2 2/5] arch: Remove get_task_comm() and print task comm directly   Yafang Shao
• [PATCH v2 3/5] net: Remove get_task_comm() and print task comm directly   Yafang Shao
• [PATCH v2 4/5] security: Remove get_task_comm() and print task comm directly   Yafang Shao
• [PATCH v2 5/5] drivers: Remove get_task_comm() and print task comm directly   Yafang Shao
• [PATCH 1/1] drm/amdgpu: Use device wedged event   Sharma, Shashank
• [PATCH 0/1] Expose dsc sink max slice count via debugfs   Swati Sharma
• [PATCH 1/1] drm/i915/dsc: Expose dsc sink max slice count via debugfs   Swati Sharma
• [PATCH] drm/i915/dsc: Expose dsc sink max slice count via debugfs   Swati Sharma
• [PATCH 1/7] vsprintf: Add %pTN to print task name   Andy Shevchenko
• [PATCH v5] drm/i915: Fix NULL pointer dereference in capture_engine   Andi Shyti
• [PATCH v4] drm/i915: ensure segment offset never exceeds allowed max   Andi Shyti
• [PATCH v6] drm/i915: Fix NULL pointer dereference in capture_engine   Andi Shyti
• [PATCH v6] drm/i915: Fix NULL pointer dereference in capture_engine   Andi Shyti
• [PATCH v6] drm/i915: Fix NULL pointer dereference in capture_engine   Andi Shyti
• [PATCH RESEND v2] drm/i915: Fix memory leak by correcting cache object name in error handler   Andi Shyti
• [PATCH v1 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Andi Shyti
• [PATCH 1/3] drm/print: add drm_print_hex_dump()   Andi Shyti
• [PATCH 2/3] drm/i915/display: use drm_print_hex_dump() for crtc state dump   Andi Shyti
• [PATCH 3/3] drm/i915/display: use drm_print_hex_dump() for buffer mismatch dumps   Andi Shyti
• [PATCH v1] drm/i915/selftest: Log throttle reasons on failure   Andi Shyti
• [RESEND] drm/i915: add GEM_WARN_ON to remap_io_sg   Andi Shyti
• [PATCH v5] drm/i915: ensure segment offset never exceeds allowed max   Andi Shyti
• [PATCH v5] drm/i915: ensure segment offset never exceeds allowed max   Andi Shyti
• [PATCH v1 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Andi Shyti
• [PATCH v2 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Andi Shyti
• [PATCH v3 1/4] drm/intel/pciids: Refactor DG2 PCI IDs into segment ranges   Andi Shyti
• [PATCH v3 3/4] drm/i915: Introduce intel_cpu_info.c for CPU IDs   Andi Shyti
• [PATCH v3 4/4] drm/i915/dg2: Implement Wa_14022698537   Andi Shyti
• [PATCH v3 4/4] drm/i915/dg2: Implement Wa_14022698537   Andi Shyti
• [PATCH] drm/i915/display: use IS_ERR_OR_NULL macro on DP tunnel mgr creation failure   Andi Shyti
• [PATCH v2] drm/display: use ERR_PTR on DP tunnel manager creation fail   Andi Shyti
• [PATCH v2] drm/display: use ERR_PTR on DP tunnel manager creation fail   Andi Shyti
• [PATCH v2] drm/display: use ERR_PTR on DP tunnel manager creation fail   Andi Shyti
• [PATCH v4 0/4] Implement Wa_14022698537   Andi Shyti
• [PATCH v4 0/4] Implement Wa_14022698537   Andi Shyti
• [RFC PATCH] i915/gt: Reapply workarounds in case the previous attempt failed.   Andi Shyti
• [PATCH v3] drm/display: use ERR_PTR on DP tunnel manager creation fail   Andi Shyti
• [PATCH] drm/i915/selftests: Use preemption timeout on cleanup   Andi Shyti
• [PATCH] drm/i915/selftests: Use preemption timeout on cleanup   Andi Shyti
• [PATCH v3] drm/i915/gt: Use ENGINE_TRACE for tracing.   Andi Shyti
• [PATCH v2 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Andi Shyti
• [RFC PATCH] i915/gt: Reapply workarounds in case the previous attempt failed.   Andi Shyti
• [PATCH] drm/i915/gt: Add logging before setting TAINT_WARN   Andi Shyti
• [PATCH v2 1/1] drm/i915/gt: Increase a time to retry RING_HEAD reset   Andi Shyti
• [PATCH v7] drm/i915/selftests: Implement frequency logging for energy reading validation   Andi Shyti
• [PATCH v7] drm/i915/selftests: Implement frequency logging for energy reading validation   Andi Shyti
• [PATCH] drm/i915/gt: Log reason for setting TAINT_WARN at reset   Andi Shyti
• [PATCH v3] drm/i915/gt: Use ENGINE_TRACE for tracing.   Andi Shyti
• [PATCH RESEND v2] drm/i915/gt: Log reason for setting TAINT_WARN at reset   Andi Shyti
• [PATCH] drm/i915/selftests: Use preemption timeout on cleanup   Andi Shyti
• [PATCH] drm/i915/selftests: Use preemption timeout on cleanup   Andi Shyti
• [PATCH RESEND v2] drm/i915/gt: Log reason for setting TAINT_WARN at reset   Andi Shyti
• [PATCH 1/3] drm/i915: Remove deadcode   Andi Shyti
• [PATCH] drm/i915/gt: Prevent uninitialized pointer reads   Andi Shyti
• [PATCH 1/3] drm/i915: Remove deadcode   Andi Shyti
• [PATCH 2/3] drm/i915: Remove unused intel_huc_suspend   Andi Shyti
• [PATCH 3/3] drm/i915: Remove unused intel_ring_cacheline_align   Andi Shyti
• [PATCH 1/3] drm/i915: Remove deadcode   Andi Shyti
• [PATCH 6/7] drivers: Repace get_task_comm() with %pTN   Jiri Slaby
• [PATCH] drm/i915/display: replace dig_port->saved_port_bits with flags   Gustavo Sousa
• [PATCH] drm/i915/display: remove unused for_each_crtc()   Gustavo Sousa
• [PATCH] drm/i915/display: convert intel_display_driver.[ch] to struct intel_display   Gustavo Sousa
• [PATCH v2] drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY   Gustavo Sousa
• [PATCH] drm/i915/dmc_wl: store register ranges in rodata   Gustavo Sousa
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Gustavo Sousa
• [PATCH 0/3] drm/i915/display: Reduce global state funcs boilerplate   Gustavo Sousa
• [PATCH 1/3] drm/i915/display: Do not assume zero offset when duplicating global state   Gustavo Sousa
• [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate   Gustavo Sousa
• [PATCH 3/3] drm/i915/display: Use INTEL_GLOBAL_STATE_DEFAULTS   Gustavo Sousa
• [PATCH 0/4] drm/i915/dmc_wl: Support extra values for dmc_wl_enable for debugging   Gustavo Sousa
• [PATCH 1/4] drm/i915/dmc_wl: Use enum values for enable_dmc_wl   Gustavo Sousa
• [PATCH 2/4] drm/i915/dmc_wl: Show description string for enable_dmc_wl   Gustavo Sousa
• [PATCH 3/4] drm/i915/dmc_wl: Allow enable_dmc_wl=2 to mean "match any register"   Gustavo Sousa
• [PATCH 4/4] drm/i915/dmc_wl: Allow enable_dmc_wl=3 to mean "always locked"   Gustavo Sousa
• [PATCH 1/3] drm/i915/display: Do not assume zero offset when duplicating global state   Gustavo Sousa
• [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate   Gustavo Sousa
• [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate   Gustavo Sousa
• [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate   Gustavo Sousa
• [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate   Gustavo Sousa
• [PATCH 3/3] drm/i915/display: Use INTEL_GLOBAL_STATE_DEFAULTS   Gustavo Sousa
• [PATCH] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v2] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v3] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v2] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev3)   Gustavo Sousa
• [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs   Gustavo Sousa
• [PATCH v2] drm/i915/display: UHBR rates for Thunderbolt   Gustavo Sousa
• [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs   Gustavo Sousa
• [PATCH v3] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v3] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH 1/4] drm/i915/pmdemand: convert to_intel_pmdemand_state() to a function   Gustavo Sousa
• [PATCH 2/4] drm/i915/pmdemand: make struct intel_pmdemand_state opaque   Gustavo Sousa
• [PATCH 3/4] drm/i915/pmdemand: convert to struct intel_display   Gustavo Sousa
• [PATCH 4/4] drm/i915/display: convert global state to struct intel_display   Gustavo Sousa
• [PATCH] drm/i915: Add debug print about hw config table size   Daniele Ceraolo Spurio
• [PATCH] drm/i915: Add debug print about hw config table size   Daniele Ceraolo Spurio
• [PATCH v2 0/9] drm/i915: Async flip + compression, and some plane cleanups   Ville Syrjala
• [PATCH v2 1/9] drm/i915: Allow async flips with render compression on TGL+   Ville Syrjala
• [PATCH v2 2/9] drm/i915: Allow async flips with compression on ICL   Ville Syrjala
• [PATCH v2 3/9] drm/i915: Introduce plane->can_async_flip()   Ville Syrjala
• [PATCH v2 4/9] drm/i915: Use plane->can_async_flip() for alignment exceptions   Ville Syrjala
• [PATCH v2 5/9] drm/i915: Reuse vlv_primary_min_alignment() for sprites as well   Ville Syrjala
• [PATCH v2 6/9] drm/i915: Disable scanout VT-d workaround for TGL+   Ville Syrjala
• [PATCH v2 7/9] drm/i915: Nuke ADL pre-production Wa_22011186057   Ville Syrjala
• [PATCH v2 8/9] drm/i915: Relocate xe AUX hack   Ville Syrjala
• [PATCH v2 9/9] drm/i915: Carve up skl_get_plane_caps()   Ville Syrjala
• [PATCH 00/18] drm/i915: DSB+VRR   Ville Syrjala
• [PATCH 01/18] drm/i915: Extract intel_crtc_vblank_delay()   Ville Syrjala
• [PATCH 02/18] drm/i915: Check vblank delay validity   Ville Syrjala
• [PATCH 03/18] drm/i915: Fix include order   Ville Syrjala
• [PATCH 04/18] drm/i915: Introduce intel_vrr_{vmin,vmax}_vtotal()   Ville Syrjala
• [PATCH 05/18] drm/i915: Move framestart/etc. state dump to a better spot   Ville Syrjala
• [PATCH 06/18] drm/i915: Include the vblank delay in the state dump   Ville Syrjala
• [PATCH 07/18] drm/i915/vrr: Improve VRR state dump   Ville Syrjala
• [PATCH 08/18] drm/i915: Include the scanline offset in the state dump   Ville Syrjala
• [PATCH 09/18] drm/i915: Extract intel_mode_vblank_delay()   Ville Syrjala
• [PATCH 10/18] drm/i915: Consolidate intel_pre_commit_crtc_state()   Ville Syrjala
• [PATCH 11/18] drm/i915: Extract intel_crtc_active_timings()   Ville Syrjala
• [PATCH 12/18] drm/i915/vrr: Introduce intel_vrr_vblank_delay()   Ville Syrjala
• [PATCH 13/18] drm/i915/vrr: Drop the extra vmin adjustment for ADL+   Ville Syrjala
• [PATCH 14/18] drm/i915/vrr: Fix vmin/vmax/flipline on TGL when using vblank delay   Ville Syrjala
• [PATCH 15/18] drm/i915/vrr: Add extra vblank delay to estimates   Ville Syrjala
• [PATCH 16/18] drm/i915/vrr: Plumb the DSB into intel_vrr_send_push()   Ville Syrjala
• [PATCH 17/18] drm/i915/dsb: Add support for triggering VRR push with DSB   Ville Syrjala
• [PATCH 18/18] drm/i915/dsb: Allow DSB to perform commits when VRR is enabled   Ville Syrjala
• [PATCH 0/4] drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints   Ville Syrjala
• [PATCH 1/4] drm/i915: Drop 64bpp YUV formats from ICL+ SDR planes   Ville Syrjala
• [PATCH 2/4] drm/i915: Drop the extra "plane" from tracpoints   Ville Syrjala
• [PATCH 3/4] drm/i915: Pass the plane state explicitly to tracpoints   Ville Syrjala
• [PATCH 4/4] drm/i915: Include pixel format in plane tracpoints   Ville Syrjala
• [PATCH 0/8] drm/i915/scaler: Scaler cleanups and tracepoints   Ville Syrjala
• [PATCH 1/8] drm/i915/scaler: Extract skl_scaler_min_src_size()   Ville Syrjala
• [PATCH 2/8] drm/i915/scaler: Extract skl_scaler_max_src_size()   Ville Syrjala
• [PATCH 3/8] drm/i915/scaler: Extract skl_scaler_min_dst_size()   Ville Syrjala
• [PATCH 4/8] drm/i915/scaler: Extract skl_scaler_max_dst_size()   Ville Syrjala
• [PATCH 5/8] drm/i915/scaler: Nuke redundant code   Ville Syrjala
• [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs   Ville Syrjala
• [PATCH 7/8] drm/i915/scaler: s/excdeed/exceed/   Ville Syrjala
• [PATCH 8/8] drm/i915/scaler: Add scaler tracepoints   Ville Syrjala
• [PATCH 3/4] drm/i915/dpt: Evict all DPT VMAs on suspend   Ville Syrjälä
• [PATCH 3/4] drm/i915/dpt: Evict all DPT VMAs on suspend   Ville Syrjälä
• [PATCH 2/2] drm/i915/dp: move g4x_dp_set_clock() call to g4x_dp_compute_config()   Ville Syrjälä
• [PATCH 00/23] Use VRR timing generator for fixed refresh rate modes   Ville Syrjälä
• [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst   Ville Syrjälä
• [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst   Ville Syrjälä
• [PATCH 1/3] drm/i915/display: Do not assume zero offset when duplicating global state   Ville Syrjälä
• [PATCH 2/3] drm/i915/display: Add infra to reduce global state funcs boilerplate   Ville Syrjälä
• [PATCH 05/10] drm/i915/psr: Ensure SFF/CFF bits are not written at their sample point   Ville Syrjälä
• [PATCH 04/10] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers   Ville Syrjälä
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Willy Tarreau
• [PATCH v3 3/4] drm/i915: Introduce intel_cpu_info.c for CPU IDs   Riana Tauro
• [PATCH v3 4/4] drm/i915/dg2: Implement Wa_14022698537   Riana Tauro
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Linus Torvalds
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Linus Torvalds
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Linus Torvalds
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Linus Torvalds
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Linus Torvalds
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Linus Torvalds
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Linus Torvalds
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Linus Torvalds
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Linus Torvalds
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Linus Torvalds
• [PATCH 5/7] security: Replace get_task_comm() with %pTN   Linus Torvalds
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Martin Uecker
• [PATCH v9 2/5] drm: make drm-active- stats optional   Tvrtko Ursulin
• [PULL] drm-intel-fixes   Tvrtko Ursulin
• [PULL] drm-intel-fixes   Tvrtko Ursulin
• [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats   Tvrtko Ursulin
• [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats   Tvrtko Ursulin
• [PULL] drm-intel-fixes   Tvrtko Ursulin
• [PATCH] drm/i915/gt: Add GEM_BUG_ON to ensure at least one engine supports migration   Tvrtko Ursulin
• [PATCH 1/3] drm/i915: Remove deadcode   Tvrtko Ursulin
• [PATCH 2/3] drm/i915: Remove unused intel_huc_suspend   Tvrtko Ursulin
• [PATCH 3/3] drm/i915: Remove unused intel_ring_cacheline_align   Tvrtko Ursulin
• [PATCH] drm/i915: Remove deadcode   Tvrtko Ursulin
• [PATCH 06/10] mtd: intel-dg: wake card on operations   Usyskin, Alexander
• [PATCH v3 06/10] mtd: intel-dg: wake card on operations   Usyskin, Alexander
• [PATCH v3 06/10] mtd: intel-dg: wake card on operations   Usyskin, Alexander
• [PATCH v3 03/10] mtd: intel-dg: implement access functions   Usyskin, Alexander
• [PATCH v3 06/10] mtd: intel-dg: wake card on operations   Usyskin, Alexander
• [PATCH 1/7] vsprintf: Add %pTN to print task name   Kalle Valo
• [PATCH RFC 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH RFC 2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH RFC 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH v2 0/4] drm/dp: Rework LTTPR transparent mode handling and add support to msm driver   Abel Vesa
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abel Vesa
• [PATCH v2 2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH v2 3/4] drm/i915/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH v2 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abel Vesa
• [PATCH v2 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abel Vesa
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Simona Vetter
• [PATCH v2 1/4] drm/dp: Add a way to init/add a connector in separate steps   Simona Vetter
• [PATCH v3 01/11] drm/connector: Add a way to init/add a connector in separate steps   Simona Vetter
• [PATCH v3 03/11] drm/connector: Add deprication notes for drm_connector_register/unregister   Simona Vetter
• [PATCH 02/10] compiler.h: add is_const() as a replacement of __is_constexpr()   Rasmus Villemoes
• [RFC PATCH] i915/gt: Reapply workarounds in case the previous attempt failed.   Rodrigo Vivi
• [PATCH v1] drm/i915/selftest: Log throttle reasons on failure   Rodrigo Vivi
• [PATCH v1] drm/i915/selftest: Log throttle reasons on failure   Rodrigo Vivi
• [PATCH v1] drm/i915/selftest: Log throttle reasons on failure   Rodrigo Vivi
• [RFT] Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING."   Rodrigo Vivi
• [PATCH] drm/i915: Update license on selftest lists to MIT   Rodrigo Vivi
• [PULL] drm-intel-next   Rodrigo Vivi
• [PULL] drm-xe-next   Rodrigo Vivi
• [PATCH] drm/xe/display: Use a single early init call for display   Rodrigo Vivi
• [PATCH 0/2] Enable GuC SLPC default balancing strategies   Rodrigo Vivi
• [PATCH 1/2] drm/i915/guc/slpc: Enable GuC SLPC default strategies   Rodrigo Vivi
• [PATCH 2/2] drm/i915/guc/slpc: Print more SLPC debug status information   Rodrigo Vivi
• [PATCH] drm/i915/guc/slpc: Print more SLPC debug status information   Rodrigo Vivi
• [PATCH] drm/i915/slpc: Add sysfs for SLPC power profiles   Rodrigo Vivi
• [PATCH v3 02/10] mtd: intel-dg: implement region enumeration   Rodrigo Vivi
• [PATCH v3 03/10] mtd: intel-dg: implement access functions   Rodrigo Vivi
• [PATCH v3 06/10] mtd: intel-dg: wake card on operations   Rodrigo Vivi
• [PATCH] drm/i915/dg1: Fix power gate sequence.   Rodrigo Vivi
• [PATCH RESEND v2] drm/i915/gt: Log reason for setting TAINT_WARN at reset   Rodrigo Vivi
• [PULL] drm-intel-next   Rodrigo Vivi
• [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats   Rodrigo Vivi
• [PATCH] drm/i915/display: program DBUF_CTL tracker state service to 0x8   Ravi Kumar Vodapalli
• [PATCH] drm/i915/display: program DBUF_CTL tracker state service to 0x8   Ravi Kumar Vodapalli
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Ravi Kumar Vodapalli
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Vodapalli, Ravi Kumar
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Vodapalli, Ravi Kumar
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Ravi Kumar Vodapalli
• [PATCH] drm/i915/display: Don't program DBUF_CTL tracker state service   Vodapalli, Ravi Kumar
• [PATCH] drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE   Ravi Kumar Vodapalli
• [PATCH] drm/i915: Remove deadcode   Vodapalli, Ravi Kumar
• [CI v3 2/6] drm/i915/hdmi: propagate errors from intel_hdmi_init_connector()   Vodapalli, Ravi Kumar
• [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout   Vodapalli, Ravi Kumar
• [PATCH 1/4] drm/i915: Drop 64bpp YUV formats from ICL+ SDR planes   Vodapalli, Ravi Kumar
• [PATCH v6] drm/i915: Fix NULL pointer dereference in capture_engine   Michal Wajdeczko
• [PATCH] drm/i915/display: use IS_ERR_OR_NULL macro on DP tunnel mgr creation failure   Michal Wajdeczko
• [PATCH] drm/i915/gvt: store virtual_dp_monitor_edid in rodata   Zhi Wang
• Regression on linux-next (next-20241120) and drm-tip   Thomas Weißschuh
• Regression on linux-next (next-20241120) and drm-tip   Thomas Weißschuh
• Regression on linux-next (next-20241120) and drm-tip   Thomas Weißschuh
• Regression on linux-next (next-20241120) and drm-tip   Thomas Weißschuh
• Regression on linux-next (next-20241120) and drm-tip   Thomas Weißschuh
• Regression on linux-next (next-20241120) and drm-tip   Thomas Weißschuh
• Regression on linux-next (next-20241120) and drm-tip   Thomas Weißschuh
• [PATCH] usb: typec: ucsi: Fix connector status writing past buffer size   Thomas Weißschuh
• [PATCH 0/5] drm: Constify 'struct bin_attribute'   Thomas Weißschuh
• [PATCH 1/5] drm/sysfs: Constify 'struct bin_attribute'   Thomas Weißschuh
• [PATCH 2/5] drm/lima: Constify 'struct bin_attribute'   Thomas Weißschuh
• [PATCH 3/5] drm/i915: Constify 'struct bin_attribute'   Thomas Weißschuh
• [PATCH 4/5] drm/amdgpu: Constify 'struct bin_attribute'   Thomas Weißschuh
• [PATCH 5/5] drm/amd/display: Constify 'struct bin_attribute'   Thomas Weißschuh
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Harry Wentland
• [PATCH 5/5] drm/amd/display: Constify 'struct bin_attribute'   Harry Wentland
• [PATCH v2 04/10] drm/amd/display: use eld_mutex to protect access to connector->eld   Harry Wentland
• Regression on linux-next (next-20241120) and drm-tip   Rafael J. Wysocki
• Regression on linux-next (next-20241120) and drm-tip   Rafael J. Wysocki
• [RFT] Revert "lockdep: Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING."   Peter Zijlstra
• [PATCH v2 1/3] drm/xen: remove redundant initialization info print   Thomas Zimmermann
• [PATCH v2 2/3] accel/ivpu: remove DRIVER_DATE conditional drm_driver init   Thomas Zimmermann
• [PATCH v2 3/3] drm: remove driver date from struct drm_driver and all drivers   Thomas Zimmermann
• [PATCH 00/12] drm/{i915,xe}: Convert to DRM client setup   Thomas Zimmermann
• [PATCH 01/12] drm/{i915, xe}: Suspend/resume fbdev emulation via client interfaces   Thomas Zimmermann
• [PATCH 02/12] drm/client: Add client-hotplug helper   Thomas Zimmermann
• [PATCH 03/12] drm/client: Send pending hotplug events after resume   Thomas Zimmermann
• [PATCH 04/12] drm/i915/display: Remove fbdev suspend and hotplug tracking   Thomas Zimmermann
• [PATCH 05/12] drm/i915/display: fbdev: Move custom restore code to new callback   Thomas Zimmermann
• [PATCH 06/12] drm/i915/display: fbdev: Move custom suspend code to new callback   Thomas Zimmermann
• [PATCH 07/12] drm/i915/display: Remove preferred_bpp from struct intel_fbdev   Thomas Zimmermann
• [PATCH 08/12] drm/i915/display: Remove struct drm_fb_helper from struct intel_fbdev   Thomas Zimmermann
• [PATCH 09/12] drm/i915/display: Move fbdev code around   Thomas Zimmermann
• [PATCH 10/12] drm/{i915,xe}: Run DRM default client setup   Thomas Zimmermann
• [PATCH 11/12] drm/i915/display: Remove compile guard around fbdev debugfs output   Thomas Zimmermann
• [PATCH 12/12] drm/fb-helper: Remove struct drm_fb_helper.fb_probe   Thomas Zimmermann
• [PATCH] drm/i915/gt: Add GEM_BUG_ON to ensure at least one engine supports migration   apoorva.singh at intel.com
• [PATCH] drm/i915/gt: Prevent uninitialized pointer reads   apoorva.singh at intel.com
• [PATCH v2 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   neil.armstrong at linaro.org
• [PATCH v2 1/5] drm/i915/fbdev: Add intel_fbdev_get_vaddr()   kernel test robot
• [PATCH v2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   kernel test robot
• [PATCH v2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   kernel test robot
• [PATCH v2] drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value   kernel test robot
• [PATCH v3 3/5] drm/i915/dp: convert to struct intel_display   kernel test robot
• [PATCH v3 3/5] drm/i915/dp: convert to struct intel_display   kernel test robot
• [PATCH 1/1] drm/amdgpu: Use device wedged event   kernel test robot
• [PATCH 1/1] drm/amdgpu: Use device wedged event   kernel test robot
• [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout   kernel test robot
• [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout   kernel test robot
• [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout   kernel test robot
• [PATCH 0/3] drm/i915/gvt: Deadcoding   linux at treblig.org
• [PATCH 2/3] drm/i915/gvt: Remove unused intel_vgpu_decode_sprite_plane   linux at treblig.org
• [PATCH 1/3] drm/i915/gvt: Remove intel_gvt_ggtt_h2g<->index   linux at treblig.org
• [PATCH 3/3] drm/i915/gvt: Remove unused intel_gvt_in_force_nonpriv_whitelist   linux at treblig.org
• [PATCH] drm/i915: Remove deadcode   linux at treblig.org
• [PATCH] drm/i915: Remove unused intel_huc_suspend   linux at treblig.org
• [PATCH] drm/i915: Remove unused intel_ring_cacheline_align   linux at treblig.org
• [PATCH] x86/platform/iosf_mbi: Remove unused iosf_mbi_unregister_pmic_bus_access_notifier   linux at treblig.org

Last message date: Tue Dec 31 19:55:47 UTC 2024
Archived on: Tue Jan 7 14:52:38 UTC 2025

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...