November 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Nov 1 02:18:40 PDT 2013
Ending: Sat Nov 30 22:11:14 PST 2013
Messages: 301

• [pulseaudio-discuss] [PATCH] card: Only set active_profile with available profile   Luiz Augusto von Dentz
  • [pulseaudio-discuss] [PATCH] card: Only set active_profile with available profile   David Henningsson
    • [pulseaudio-discuss] [PATCH] card: Only set active_profile with available profile   Luiz Augusto von Dentz
      • [pulseaudio-discuss] [PATCH] card: Only set active_profile with available profile   David Henningsson
• [pulseaudio-discuss] Is This Getting Through?   Tanu Kaskinen
  • [pulseaudio-discuss] Is This Getting Through?   Mark LaPierre
  • [pulseaudio-discuss] Is This Getting Through?   Mark LaPierre
• [pulseaudio-discuss] How to control playback start timing (RAOP)   Tanu Kaskinen
• [pulseaudio-discuss] How to control playback start timing (RAOP)   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] tests: Extract PA_CPU_TEST* macros to separate header   David Henningsson
• [pulseaudio-discuss] [PATCH 00/18] resampler: Refactor and cleanup   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] console-kit: Remove logging of every message on the bus   Tanu Kaskinen
• [pulseaudio-discuss] Patch review status   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2] alsa-mixer: Add internal surround speaker elements   David Henningsson
• [pulseaudio-discuss] Sound Volume Setting At Login   Mark LaPierre
  • [pulseaudio-discuss] Sound Volume Setting At Login   Tanu Kaskinen
    • [pulseaudio-discuss] Sound Volume Setting At Login   Weedy
      • [pulseaudio-discuss] Sound Volume Setting At Login   Mark LaPierre
      • [pulseaudio-discuss] Sound Volume Setting At Login   Weedy
      • [pulseaudio-discuss] Sound Volume Setting At Login   Mark LaPierre
      • [pulseaudio-discuss] Sound Volume Setting At Login   Mark LaPierre
• [pulseaudio-discuss] [PATCH v2] card: Only set active_profile with available profile   Luiz Augusto von Dentz
  • [pulseaudio-discuss] [PATCH v2] card: Only set active_profile with available profile   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] introspect: Fix ABI break introduce by b98a2e1   Luiz Augusto von Dentz
  • [pulseaudio-discuss] [PATCH] introspect: Fix ABI break introduce by b98a2e1   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] introspect: Fix ABI break introduce by b98a2e1   Alexander E. Patrakov
    • [pulseaudio-discuss] [PATCH] introspect: Fix ABI break introduce by b98a2e1   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH] introspect: Fix ABI break introduce by b98a2e1   Alexander E. Patrakov
• [pulseaudio-discuss] [PATCH] introspect: Fix ABI break introduced by b98a2e1   Luiz Augusto von Dentz
  • [pulseaudio-discuss] [PATCH] introspect: Fix ABI break introduced by b98a2e1   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] build-sys: Add an Android-friendly build system   Javier Jardón
  • [pulseaudio-discuss] [PATCH] build-sys: Add an Android-friendly build system   Arun Raghavan
• [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
  • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
    • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   David Henningsson
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   David Henningsson
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   David Henningsson
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   David Henningsson
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   David Henningsson
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   David Henningsson
      • [pulseaudio-discuss] Edinburgh Murphy meeting notes   Tanu Kaskinen
• [pulseaudio-discuss] Is it possible to connect to an existing stream using pulse audio?   sathishkumar sivagurunathan
  • [pulseaudio-discuss] Is it possible to connect to an existing stream using pulse audio?   David Henningsson
  • [pulseaudio-discuss] Is it possible to connect to an existing stream using pulse audio?   Rémi Denis-Courmont
• [pulseaudio-discuss] Is it possible to connect to an existing stream using pulse audio?   Sathishkumar
• [pulseaudio-discuss] make pulseaudio-aggregate-configure error for Android 4.2.2_r1.2   Jeff Wang
  • [pulseaudio-discuss] make pulseaudio-aggregate-configure error for Android 4.2.2_r1.2   Arun Raghavan
    • [pulseaudio-discuss] make pulseaudio-aggregate-configure error for Android 4.2.2_r1.2   Jeff Wang
• [pulseaudio-discuss] [PATCH 0/9] Create more nodes   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 1/9] Create nodes for sink inputs   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 2/9] Create nodes for source outputs   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 3/9] Create nodes for sinks   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 4/9] Create nodes for sources   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 5/9] source: Initialize pa_source.monitor_of already in pa_source_new()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 6/9] sink: Create the sink node before creating the monitor source   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 7/9] Create nodes for monitor sources   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 8/9] node: Generate a nice name for monitor nodes   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 9/9] device-port: Generate monitor nodes for output ports   Tanu Kaskinen
• [pulseaudio-discuss] Patch review status wiki page updated   Tanu Kaskinen
• [pulseaudio-discuss] resubmit reverted resampler patch   Tanu Kaskinen
  • [pulseaudio-discuss] resubmit reverted resampler patch   Tanu Kaskinen
    • [pulseaudio-discuss] resubmit reverted resampler patch   Peter Meerwald
• [pulseaudio-discuss] [PATCH] doxygen: Replace "\deprecated" with "\b Deprecated."   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] doxygen: Replace "\deprecated" with "\b Deprecated."   Thomas Martitz
    • [pulseaudio-discuss] [PATCH] doxygen: Replace "\deprecated" with "\b Deprecated."   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH] doxygen: Replace "\deprecated" with "\b Deprecated."   Thomas Martitz
      • [pulseaudio-discuss] [PATCH] doxygen: Replace "\deprecated" with "\b Deprecated."   Arun Raghavan
• [pulseaudio-discuss] [PATCH 09/11] resampler: Extend fit_buf() helper to copy leftover data to new buffer   Tanu Kaskinen
• [pulseaudio-discuss] Possible bug in pa_sink_input_request_rewind   Alexander E. Patrakov
  • [pulseaudio-discuss] Possible bug in pa_sink_input_request_rewind   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 03/11] resampler: Change interface, resampler may return the number of leftover frames   Alexander E. Patrakov
  • [pulseaudio-discuss] [PATCH 03/11] resampler: Change interface, resampler may return the number of leftover frames   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 03/11] resampler: Change interface, resampler may return the number of leftover frames   Alexander E. Patrakov
      • [pulseaudio-discuss] [PATCH 03/11] resampler: Change interface, resampler may return the number of leftover frames   Tanu Kaskinen
• [pulseaudio-discuss] module-x11-bell playback volume   Paul LeoNerd Evans
• [pulseaudio-discuss] PulseAudio 2.1-1 (Cygwin 64-bit): Failed to create secure directory: Unknown error 13   Nithin Kurien
• [pulseaudio-discuss] [PATCH] core-util: Blame systemd for not setting up XDG_RUNTIME_DIR correctly   David Henningsson
• [pulseaudio-discuss] [RFC 1/2] card: Rank profiles based on available flag   Luiz Augusto von Dentz
  • [pulseaudio-discuss] [RFC 2/2] bluetooth: Rank profiles based on available flag   Luiz Augusto von Dentz
    • [pulseaudio-discuss] [RFC 2/2] bluetooth: Rank profiles based on available flag   Tanu Kaskinen
      • [pulseaudio-discuss] [RFC 2/2] bluetooth: Rank profiles based on available flag   Luiz Augusto von Dentz
      • [pulseaudio-discuss] [RFC 2/2] bluetooth: Rank profiles based on available flag   Tanu Kaskinen
      • [pulseaudio-discuss] [RFC 2/2] bluetooth: Rank profiles based on available flag   Luiz Augusto von Dentz
      • [pulseaudio-discuss] [RFC 2/2] bluetooth: Rank profiles based on available flag   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/3] modargs: Add a mechanism to append modargs   David Henningsson
• [pulseaudio-discuss] [PATCH 2/3] alsa-ucm: Drop support for PlaybackPCM on devices   David Henningsson
• [pulseaudio-discuss] [PATCH 3/3] alsa-ucm: Add the ability to set modargs from UCM config   David Henningsson
• [pulseaudio-discuss] [PATCH] sink-input, source-output: Don't assume that proplist has been initialized in free()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] sink-input, source-output: Don't assume that proplist has been initialized in free()   David Henningsson
    • [pulseaudio-discuss] [PATCH] sink-input, source-output: Don't assume that proplist has been initialized in free()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] source-output: Log the format negotiation result   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] source-output: Log the format negotiation result   Tanu Kaskinen
• [pulseaudio-discuss] Question regarding usage of pa_stream_peek() and pa_stream_drop()   nimesh.chanchani at accenture.com
  • [pulseaudio-discuss] Question regarding usage of pa_stream_peek() and pa_stream_drop()   Tanu Kaskinen
    • [pulseaudio-discuss] Question regarding usage of pa_stream_peek() and pa_stream_drop()   nimesh.chanchani at accenture.com
      • [pulseaudio-discuss] Question regarding usage of pa_stream_peek() and pa_stream_drop()   Tanu Kaskinen
• [pulseaudio-discuss] Configurable Latency for DLNA / Network Audio Streaming   Simon Boulet
  • [pulseaudio-discuss] Configurable Latency for DLNA / Network Audio Streaming   Tanu Kaskinen
• [pulseaudio-discuss] Patch review status wiki page updated   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] tunnel-new: add cookie module argument   Tanu Kaskinen
• [pulseaudio-discuss] card: Only set active_profile with available profile   Colin Guthrie
  • [pulseaudio-discuss] [PATCH 1/4] card: Ensure we still pick a profile even if it's unavailable.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 2/4] card: Try to pick known available profiles first.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 3/4] sink/source: When picking the initial ports, prefer ones that are not unavailable.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 4/4] sink/source: Try to pick known available ports first.   Colin Guthrie
    • [pulseaudio-discuss] [PATCH 1/4] card: Ensure we still pick a profile even if it's unavailable.   Tanu Kaskinen
  • [pulseaudio-discuss] card: Only set active_profile with available profile   David Henningsson
  • [pulseaudio-discuss] card: Only set active_profile with available profile   Tanu Kaskinen
    • [pulseaudio-discuss] card: Only set active_profile with available profile   Colin Guthrie
      • [pulseaudio-discuss] card: Only set active_profile with available profile   Luiz Augusto von Dentz
      • [pulseaudio-discuss] card: Only set active_profile with available profile   Tanu Kaskinen
      • [pulseaudio-discuss] card: Only set active_profile with available profile   Luiz Augusto von Dentz
      • [pulseaudio-discuss] card: Only set active_profile with available profile   David Henningsson
      • [pulseaudio-discuss] card: Only set active_profile with available profile   Tanu Kaskinen
      • [pulseaudio-discuss] card: Only set active_profile with available profile   Luiz Augusto von Dentz
      • [pulseaudio-discuss] card: Only set active_profile with available profile   Tanu Kaskinen
      • [pulseaudio-discuss] card: Only set active_profile with available profile   Tanu Kaskinen
      • [pulseaudio-discuss] card: Only set active_profile with available profile   David Henningsson
      • [pulseaudio-discuss] card: Only set active_profile with available profile   Raymond Yau
• [pulseaudio-discuss] [PATCH] tunnel-new: cork the stream when sink/source gets suspended and uncork it when resumed   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 0/2] tunnel-new: corking / uncorking   Alexander Couzens
    • [pulseaudio-discuss] [PATCH 1/2] tunnel-new: add un/corking to the state change callback   Alexander Couzens
    • [pulseaudio-discuss] [PATCH 2/2] tunnel-new: remove uncorking in thread_func. Now handled by state change callback.   Alexander Couzens
• [pulseaudio-discuss] how to change the payload type while rtp streaming.   Anuj Jaiswal
• [pulseaudio-discuss] [PATCH 1/5] bluetooth: Use a helper function for setting device_info_valid   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 2/5] bluetooth: Don't mark device valid before it has an adapter   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 3/5] bluetooth: Fire DEVICE_CONNECTION_CHANGED in set_device_info_valid()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 4/5] bluetooth: Remove device_remove_all()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 5/5] bluetooth: Set device_info_valid to -1 when the device's adapter disappears   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 5/5] bluetooth: Set device_info_valid to -1 when the device's adapter disappears   Luiz Augusto von Dentz
      • [pulseaudio-discuss] [PATCH 5/5] bluetooth: Set device_info_valid to -1 when the device's adapter disappears   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 1/5] bluetooth: Use a helper function for setting device_info_valid   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 1/5] bluetooth: Use a helper function for setting device_info_valid   João Paulo Rechi Vita
      • [pulseaudio-discuss] [PATCH 1/5] bluetooth: Use a helper function for setting device_info_valid   Tanu Kaskinen
• [pulseaudio-discuss] DLNA sharing without gstlaunch   Julian Sikorski
• [pulseaudio-discuss] [PATCH] sink, source: Add a TODO comment about removing get_formats()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] sink, source: Add a TODO comment about removing get_formats()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] idxset: Allow deep copying with pa_idxset_copy()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] idxset: Allow deep copying with pa_idxset_copy()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] ucm: Add a FIXME comment about bad error handling   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] ucm: Add a FIXME comment about bad error handling   Tanu Kaskinen
• [pulseaudio-discuss] Question regarding usage of pa_stream_peek() and pa_stream_drop()   nimesh.chanchani at accenture.com
  • [pulseaudio-discuss] Question regarding usage of pa_stream_peek() and pa_stream_drop()   Tanu Kaskinen
• [pulseaudio-discuss] How to set media role variable ??   sathishkumar sivagurunathan
  • [pulseaudio-discuss] How to set media role variable ??   Tanu Kaskinen
    • [pulseaudio-discuss] How to set media role variable ??   sathishkumar sivagurunathan
      • [pulseaudio-discuss] How to set media role variable ??   Tanu Kaskinen
      • [pulseaudio-discuss] How to set media role variable ??   sathishkumar sivagurunathan
      • [pulseaudio-discuss] How to set media role variable ??   Tanu Kaskinen
      • [pulseaudio-discuss] How to set media role variable ??   sathishkumar sivagurunathan
      • [pulseaudio-discuss] How to set media role variable ??   sathishkumar sivagurunathan
      • [pulseaudio-discuss] How to set media role variable ??   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] Fixed bug 47493 (protocol-native: XOR asserts are expressed in a roundabout way)   Parin Porecha
  • [pulseaudio-discuss] [PATCH] Fixed bug 47493 (protocol-native: XOR asserts are expressed in a roundabout way)   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH] Fixed bug 47493 (protocol-native: XOR asserts are expressed in a roundabout way)   Scott Reeves
      • [pulseaudio-discuss] [PATCH] Fixed bug 47493 (protocol-native: XOR asserts are expressed in a roundabout way)   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 00/23] Routing: allow router modules to set stream initial routing   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 01/23] Remove pa_device_port_new_data.create_node   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 02/23] Remove create_node from sink input and source output new data   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 03/23] Remove create_node from sink and source new data   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 04/23] source: Initialize pa_source.monitor_of already in pa_source_new()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 05/23] sink: Create the sink node before creating the monitor source   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 06/23] Don't create nodes for monitor sources if the sink has ports   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 07/23] node: Generate a nice name for monitor nodes   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 08/23] device-port: Generate monitor nodes for output ports   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 09/23] source-output: Log the format negotiation result   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 10/23] sink-input, source-output: Use "goto fail" for error handling in new()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 11/23] sink-input, source-output: Allocate the object early in new()   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 11/23] sink-input, source-output: Allocate the object early in new()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 12/23] match: Do proplist updating already in the NEW hook   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 13/23] sink-input, source-output: Create the node early   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 14/23] Fix some error reporting style issues   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 15/23] sink, source: Add a TODO comment about removing get_formats()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 16/23] idxset: Allow deep copying with pa_idxset_copy()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 17/23] core-format: Add pa_format_info_negotiate()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 18/23] sink-input, source-output: Add req_formats to pa_sink_input/pa_source_output   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 19/23] sink-input, source-output: Add set_initial_sink/source()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 20/23] sink-input, source-output: Allow pa_node_put() to do routing   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 21/23] Introduce pa_router   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 21/23] Introduce pa_router   David Henningsson
      • [pulseaudio-discuss] [PATCH 21/23] Introduce pa_router   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH 21/23] Introduce pa_router   David Henningsson
  • [pulseaudio-discuss] [PATCH 22/23] node: Notify pa_router about new and removed nodes   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 23/23] New module: module-experimental-router   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] Pass the profile object instead of the profile name to pa_card_set_profile()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] Pass the profile object instead of the profile name to pa_card_set_profile()   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] bluetooth: Fix crash in pa_bluetooth_discovery_get_device_by_address()   jprvita at gmail.com
  • [pulseaudio-discuss] [PATCH] bluetooth: Fix crash in pa_bluetooth_discovery_get_device_by_address()   João Paulo Rechi Vita
    • [pulseaudio-discuss] [PATCH] bluetooth: Fix crash in pa_bluetooth_discovery_get_device_by_address()   jprvita at gmail.com
      • [pulseaudio-discuss] [PATCH] bluetooth: Fix crash in pa_bluetooth_discovery_get_device_by_address()   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH] bluetooth: Fix crash in pa_bluetooth_discovery_get_device_by_address()   João Paulo Rechi Vita
• [pulseaudio-discuss] [PATCH 1/2] bluetooth: Check adapter address to set device_info_valid   jprvita at gmail.com
  • [pulseaudio-discuss] [PATCH 2/2] bluetooth: Fix crash in pa_bluetooth_discovery_get_device_by_address()   jprvita at gmail.com
  • [pulseaudio-discuss] [PATCH 1/2] bluetooth: Check adapter address to set device_info_valid   Tanu Kaskinen
• [pulseaudio-discuss] acceptable noise level for mic boost   Oleksij Rempel
  • [pulseaudio-discuss] acceptable noise level for mic boost   Tanu Kaskinen
    • [pulseaudio-discuss] acceptable noise level for mic boost   Oleksij Rempel
      • [pulseaudio-discuss] acceptable noise level for mic boost   Oleksij Rempel
      • [pulseaudio-discuss] acceptable noise level for mic boost   Tanu Kaskinen
      • [pulseaudio-discuss] acceptable noise level for mic boost   Tanu Kaskinen
      • [pulseaudio-discuss] acceptable noise level for mic boost   Oleksij Rempel
• [pulseaudio-discuss] null-sink rewinds causing stutter   Daniel
  • [pulseaudio-discuss] null-sink rewinds causing stutter   Tanu Kaskinen
    • [pulseaudio-discuss] null-sink rewinds causing stutter   Daniel
• [pulseaudio-discuss] Patch review status wiki page updated   Tanu Kaskinen
  • [pulseaudio-discuss] Patch review status wiki page updated   Damir Jelić
    • [pulseaudio-discuss] Patch review status wiki page updated   Tanu Kaskinen
      • [pulseaudio-discuss] Patch review status wiki page updated   Damir Jelić
      • [pulseaudio-discuss] Patch review status wiki page updated   Tanu Kaskinen
      • [pulseaudio-discuss] Patch review status wiki page updated   Damir Jelić
• [pulseaudio-discuss] Multiple ALSA output devices   Paul LeoNerd Evans
• [pulseaudio-discuss] [PATCH 00/11] Routing: Move routing policy code out of module-alsa-card   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 01/11] Pass the profile object instead of the profile name to pa_card_set_profile()   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 02/11] Allow router modules to intercept profile switch requests   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 03/11] New module: module-skoa-router   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 04/11] Add names to routers   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 05/11] card: Add recreate_devices_on_profile_change flag   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 06/11] Introduce pa_device_prototype   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 06/11] Introduce pa_device_prototype   David Henningsson
  • [pulseaudio-discuss] [PATCH 07/11] Add device prototype support to the core   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 08/11] alsa: Add device prototype support   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 09/11] bluetooth: Add device prototype support   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 10/11] skoa-router: Implement a stream rescue policy for profile switch situations   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 11/11] alsa: Remove the stream rescue policy from module-alsa-card   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 00/11] Routing: Move routing policy code out of module-alsa-card   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 00/11] Routing: Move routing policy code out of module-alsa-card   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH 00/11] Routing: Move routing policy code out of module-alsa-card   David Henningsson
      • [pulseaudio-discuss] [PATCH 00/11] Routing: Move routing policy code out of module-alsa-card   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH 00/11] Routing: Move routing policy code out of module-alsa-card   David Henningsson
      • [pulseaudio-discuss] [PATCH 00/11] Routing: Move routing policy code out of module-alsa-card   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH 00/11] Routing: Move routing policy code out of module-alsa-card   David Henningsson
• [pulseaudio-discuss] PulseAudio4Future   Владислав Андреев
  • [pulseaudio-discuss] PulseAudio4Future   Daniel
    • [pulseaudio-discuss] PulseAudio4Future   Владислав Андреев
      • [pulseaudio-discuss] PulseAudio4Future   Daniel
      • [pulseaudio-discuss] PulseAudio4Future   Владислав Андреев
• [pulseaudio-discuss] Question regarding usage of pa_stream_peek() and pa_stream_drop()   nimesh.chanchani at accenture.com
• [pulseaudio-discuss] What-did-you-plugin-dialog   David Henningsson
  • [pulseaudio-discuss] What-did-you-plugin-dialog   Tanu Kaskinen
    • [pulseaudio-discuss] What-did-you-plugin-dialog   David Henningsson
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Tanu Kaskinen
      • [pulseaudio-discuss] What-did-you-plugin-dialog   David Henningsson
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Tanu Kaskinen
      • [pulseaudio-discuss] What-did-you-plugin-dialog   David Henningsson
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Alexander E. Patrakov
      • [pulseaudio-discuss] What-did-you-plugin-dialog   David Henningsson
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Alexander E. Patrakov
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Alexander E. Patrakov
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Raymond Yau
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Alexander E. Patrakov
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Raymond Yau
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Alexander E. Patrakov
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Raymond Yau
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Alexander E. Patrakov
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Tanu Kaskinen
      • [pulseaudio-discuss] What-did-you-plugin-dialog   David Henningsson
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Raymond Yau
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Alexander E. Patrakov
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Raymond Yau
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Tanu Kaskinen
  • [pulseaudio-discuss] What-did-you-plugin-dialog   Damir Jelić
    • [pulseaudio-discuss] What-did-you-plugin-dialog   David Henningsson
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Damir Jelić
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Damir Jelić
      • [pulseaudio-discuss] What-did-you-plugin-dialog   David Henningsson
      • [pulseaudio-discuss] What-did-you-plugin-dialog   Damir Jelić
  • [pulseaudio-discuss] What-did-you-plugin-dialog   Raymond Yau
• [pulseaudio-discuss] no sound in steam and all valve games after install openSUSE 13.1   guus
  • [pulseaudio-discuss] no sound in steam and all valve games after install openSUSE 13.1   Damir Jelić
    • [pulseaudio-discuss] no sound in steam and all valve games after install openSUSE 13.1   guus
    • [pulseaudio-discuss] no sound in steam and all valve games after install openSUSE 13.1   guus
• [pulseaudio-discuss] Patch review status wiki page updated   Tanu Kaskinen
  • [pulseaudio-discuss] Patch review status wiki page updated   Alexander E. Patrakov
    • [pulseaudio-discuss] Patch review status wiki page updated   Damir Jelić
      • [pulseaudio-discuss] Patch review status wiki page updated   Alexander E. Patrakov
      • [pulseaudio-discuss] Patch review status wiki page updated   Tanu Kaskinen
      • [pulseaudio-discuss] Patch review status wiki page updated   Damir Jelić
• [pulseaudio-discuss] [PATCH] resampler: Clean up ffmpeg resampler buffering   Peter Meerwald
• [pulseaudio-discuss] [PATCHv2 0/4] resample_method argument for module-remap-*   Peter Meerwald
  • [pulseaudio-discuss] [PATCHv2 3/4] module-remap-sink: Add resample_method argument   Peter Meerwald
  • [pulseaudio-discuss] [PATCHv2 4/4] module-remap-source: Add resample_method argument   Peter Meerwald
• [pulseaudio-discuss] [PATCHv2 1/4] modules: Make use of new function pa_modargs_get_sample_rate()   Peter Meerwald
• [pulseaudio-discuss] [PATCHv2 2/4] module-sine: Add rate argument   Peter Meerwald
• [pulseaudio-discuss] [PATCHv2] resampler: Clean up ffmpeg resampler buffering   Peter Meerwald
• [pulseaudio-discuss] Issue with multiple hdmi codecs in radeonhd, hacked to work   John Ettedgui
• [pulseaudio-discuss] [PATCH] alsa: Disable timer-scheduling for PCMs with the BATCH flag   Lars-Peter Clausen

Last message date: Sat Nov 30 22:11:14 PST 2013
Archived on: Mon Dec 2 03:00:03 PST 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...