May 2009 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri May 1 00:27:22 CEST 2009
Ending: Sun May 31 20:38:10 CEST 2009
Messages: 355

• [Intel-gfx] [PATCH] Use zero videoRam and aligned size limit in DRM mode   Eric Anholt
• [Intel-gfx] [PATCH] KMS: cache the EDID information of the LVDS   Jesse Barnes
• [Intel-gfx] [PATCH] KMS: do a faster EDID   Eric Anholt
• [Intel-gfx] [PATCH] KMS: do a faster EDID   Dave Airlie
• [Intel-gfx] Reporting regressions in intel-gpu-tools "make check"   Alex Bennee
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Jesse Barnes
• [Intel-gfx] Kernel bits and DKMS. Possible?   Colin Guthrie
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Jesse Barnes
• [Intel-gfx] [PATCH] Call down to lower CloseScreen before shutting down DRM allocator   Keith Packard
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Jesse Barnes
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Jesse Barnes
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Jesse Barnes
• [Intel-gfx] [PATCH] add get_vblank_counter function for GM45   Robert Noland
• [Intel-gfx] Reporting regressions in intel-gpu-tools "make check"   Eric Anholt
• [Intel-gfx] [PATCH] XvMC: enable XvMC on DRI2   Xiang, Haihao
• [Intel-gfx] Reporting regressions in intel-gpu-tools "make check"   Alex Bennee
• [Intel-gfx] [PATCH] i915: Restore fence registers on resume   Kristian Høgsberg
• [Intel-gfx] [PATCH] i915: Restore fence registers on resume   Eric Anholt
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Carl Worth
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Ian Romanick
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Jesse Barnes
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Eric Anholt
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Ian Romanick
• [Intel-gfx] [RFC] [Patch 0/2] [intel-gfx] :add the CVT/GTF algorithm in kernel space   yakui_zhao
• [Intel-gfx] [RFC] [Patch 1/2] [intel-gfx] : Add the CVT algorithm in kernel space   yakui_zhao
• [Intel-gfx] [RFC] [Patch 2/2] [intel-gfx] : Add the GTF algorithm in kernel space   yakui_zhao
• [Intel-gfx] [PATCH] XvMC: enable XvMC on DRI2   David Amiel
• [Intel-gfx] [PATCH] i915: Restore fence registers on resume   Stefano Avallone
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Jesse Barnes
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Kristian Høgsberg
• [Intel-gfx] [PATCH] i915: apply G45 vblank count code to all G4x chips   Jesse Barnes
• [Intel-gfx] [RFC] [Patch 1/2] [intel-gfx] : Add the CVT algorithm in kernel space   Ian Romanick
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Ian Romanick
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Jesse Barnes
• [Intel-gfx] [PATCH] i915: apply G45 vblank count code to all G4x chips   Robert Noland
• [Intel-gfx] [PATCH] i915: Restore fence registers on resume   Kristian Høgsberg
• [Intel-gfx] [PATCH] i915: apply G45 vblank count code to all G4x chips and fix max_frame_count   Jesse Barnes
• [Intel-gfx] [PATCH] i915: Restore fence registers on resume   Arkadiusz Miskiewicz
• [Intel-gfx] [PATCH] i915: sanity check IER at wait_request time   Jesse Barnes
• [Intel-gfx] [PATCH] i915: sanity check IER at wait_request time   Dan Nicholson
• [Intel-gfx] [RFC] [Patch 1/2] [intel-gfx] : Add the CVT algorithm in kernel space   yakui_zhao
• [Intel-gfx] [PATCH] XvMC: enable XvMC on DRI2   Xiang, Haihao
• [Intel-gfx] [PATCH] drm/i915: allocate & enable MCHBAR if needed   Zhenyu Wang
• [Intel-gfx] [PATCH] i915: Restore fence registers on resume   Stefano Avallone
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Carl Worth
• [Intel-gfx] [PATCH 1/2] Hold reference to video binding table until all rects are painted.   Carl Worth
• [Intel-gfx] [PATCH 2/2] Split i915 textured video commands to fit into batch buffers.   Carl Worth
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Kristian Høgsberg
• [Intel-gfx] [PATCH] drm/i915: allocate & enable MCHBAR if needed   Jesse Barnes
• [Intel-gfx] [PATCH 1/2] UBUNTU: SAUCE: pnp: add PNP resource range checking function   Jesse Barnes
• [Intel-gfx] [PATCH 0/2] enabling MCHBAR patches -- testing feedback   Jesse Barnes
• [Intel-gfx] [PATCH 0/2] enabling MCHBAR patches -- testing feedback   Eric Anholt
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Eric Anholt
• [Intel-gfx] [RFC] [Patch 1/2] [intel-gfx] : Add the CVT algorithm in kernel space   Eric Anholt
• [Intel-gfx] [RFC] [Patch 1/2] [intel-gfx] : Add the CVT algorithm in kernel space   Eric Anholt
• [Intel-gfx] [RFC] [Patch 1/2] [intel-gfx] : Add the CVT algorithm in kernel space   yakui_zhao
• [Intel-gfx] [PATCH 0/3] enabling sdvo-lvds if edid is not available.   Ma Ling
• [Intel-gfx] [PATCH 1/3]Fetch mode lines from VBT, then reserve them   Ma Ling
• [Intel-gfx] PATCH 2/3]Set crt_present flag according to option in Block #1 of VBT   Ma Ling
• [Intel-gfx] [PATCH 3/3]Provide mode lines from VBT to xorg   Ma Ling
• [Intel-gfx] [PATCH 0/3 V2] enabling sdvo-lvds if edid is not available.   Ma Ling
• [Intel-gfx] Dual-display support with 945G/GZ and ADD2-R adapter ?   Teemu Tuominen
• [Intel-gfx] [RFC] [Patch 1/2] [intel-gfx] : Add the CVT algorithm in kernel space   Eric Anholt
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Kristian Høgsberg
• [Intel-gfx] [RFC] DRI2 swapbuffers (yes yet again)   Kristian Høgsberg
• [Intel-gfx] compiz swapbuffers patch   Jesse Barnes
• [Intel-gfx] [PATCH 1/2] Add DP link and GMCH M and N registers   Keith Packard
• [Intel-gfx] [PATCH 2/2] Load i915 and fbcon when checking for KMS   Keith Packard
• [Intel-gfx] [PATCH 2/2] Load i915 and fbcon when checking for KMS   Robert Noland
• [Intel-gfx] [PATCH] Fallback when VT inactive   Keith Packard
• [Intel-gfx] [PATCH 2/2] Load i915 and fbcon when checking for KMS   Keith Packard
• [Intel-gfx] compiz swapbuffers patch   Barry Scott
• [Intel-gfx] [PATCH 0/2] drm/i915: enabling sdvo-lvds if edid is not available   Ma Ling
• [Intel-gfx] [PATCH 1/2] drm/i915: Fetch mode lines from VBT, then reserve them   Ma Ling
• [Intel-gfx] [PATCH 2/2] drm/i915: Provide mode lines from VBT to drm   Ma Ling
• [Intel-gfx] [PATCH 0/2] drm/i915: enabling sdvo-lvds if edid is not available   Ma Ling
• [Intel-gfx] compiz swapbuffers patch   Jesse Barnes
• [Intel-gfx] compiz swapbuffers patch   Jesse Barnes
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Rémi Cardona
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Eric Anholt
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Rémi Cardona
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Keith Packard
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Carl Worth
• [Intel-gfx] [PATCH] Add modesetting pageflip ioctl and corresponding drm event   Kristian Høgsberg
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   Carl Worth
• [Intel-gfx] [PATCH] Add modesetting pageflip ioctl and corresponding drm event   Kristian Høgsberg
• [Intel-gfx] [PATCH] drm/i915: allocate large pointer arrays with vmalloc   Jesse Barnes
• [Intel-gfx] [PATCH] libdrm: add KMS page flip interface   Kristian Høgsberg
• [Intel-gfx] [PATCH] drm/i915: allocate large pointer arrays with vmalloc   Keith Packard
• [Intel-gfx] [PATCH] drm/i915: allocate large pointer arrays with vmalloc   Jesse Barnes
• [Intel-gfx] [PATCH] drm/i915: allocate large pointer arrays with vmalloc   Jesse Barnes
• [Intel-gfx] [PATCH] drm/i915: allocate large pointer arrays with vmalloc   Jesse Barnes
• [Intel-gfx] [PATCH] drm/i915: allocate large pointer arrays with vmalloc   Jesse Barnes
• [Intel-gfx] [PATCH] drm/i915: allocate large pointer arrays with vmalloc   Keith Packard
• [Intel-gfx] Xorg crashes with fresh 2.6.29   David Amiel
• [Intel-gfx] Doing restore by setting modes   Keith Packard
• [Intel-gfx] Doing restore by setting modes   Jesse Barnes
• [Intel-gfx] Doing restore by setting modes   Dave Airlie
• [Intel-gfx] Dual-display support with 945G/GZ and ADD2-R adapter ?   Jin, Gordon
• [Intel-gfx] [PATCH] Set hot plug interrupt detect enale for HDMI output   Ma Ling
• [Intel-gfx] [Patch 0/2] [DRM] :add the CVT/GTF algorithm in kernel space   yakui_zhao
• [Intel-gfx] [Patch 1/2] [DRM] :add the CVT algorithm in kernel space   yakui_zhao
• [Intel-gfx] [Patch 2/2] [DRM] :add the GTF algorithm in kernel space   yakui_zhao
• [Intel-gfx] [PATCH] drm/i915: Set hot plug interrupt detect enale for HDMI output   Ma Ling
• [Intel-gfx] Dual-display support with 945G/GZ and ADD2-R adapter ?   Teemu Tuominen
• [Intel-gfx] Dual-display support with 945G/GZ and ADD2-R adapter ?   Teemu Tuominen
• [Intel-gfx] compiz swapbuffers patch   Barry Scott
• [Intel-gfx] Doing restore by setting modes   Jesse Barnes
• [Intel-gfx] [PATCH] libdrm/intel: add drm_intel_bo_disable_reuse api   Keith Packard
• [Intel-gfx] [PATCH] Use drm_intel_bo_disable_reuse API to flag scanout and cursor buffers   Keith Packard
• [Intel-gfx] [PATCH] Add modesetting pageflip ioctl and corresponding drm event   Jesse Barnes
• [Intel-gfx] [PATCH 1/2] drm/i915: Fetch mode lines from VBT, then reserve them   Jesse Barnes
• [Intel-gfx] [PATCH 2/2] drm/i915: Provide mode lines from VBT to drm   Jesse Barnes
• [Intel-gfx] [PATCH 1/2] drm/i915: Fetch mode lines from VBT, then reserve them   Zhenyu Wang
• [Intel-gfx] [PATCH 1/2] drm/i915: Fetch mode lines from VBT, then reserve them   Ma, Ling
• [Intel-gfx] [PATCH 2/2] drm/i915: Provide mode lines from VBT to drm   Ma, Ling
• [Intel-gfx] [PATCH] libdrm/intel: add drm_intel_bo_disable_reuse api   Eric Anholt
• [Intel-gfx] [PATCH] drm/i915: Don't allow binding objects into the last page of the aperture.   Eric Anholt
• [Intel-gfx] [PATCH] drm/i915: Don't allow binding objects into the last page of the aperture.   Jesse Barnes
• [Intel-gfx] [PATCH] libdrm/intel: add drm_intel_bo_disable_reuse api   Keith Packard
• [Intel-gfx] [PATCH 1/2] libdrm/intel: add drm_intel_bo_disable_reuse api   Keith Packard
• [Intel-gfx] [PATCH 2/2] Bump to version 2.4.10 to mark addition of drm_intel_bo_disable_reuse   Keith Packard
• [Intel-gfx] [PATCH 2/2] Bump to version 2.4.10 to mark addition of drm_intel_bo_disable_reuse   Eric Anholt
• [Intel-gfx] [RFC] kill pI830->memory_manager checks   Jesse Barnes
• [Intel-gfx] [RFC] kill pI830->memory_manager checks   Eric Anholt
• [Intel-gfx] [PATCH] drm/i915: Don't allow binding objects into the last page of the aperture.   Eric Anholt
• [Intel-gfx] [PATCH] drm/i915: Don't allow binding objects into the last page of the aperture.   Jesse Barnes
• [Intel-gfx] [RFC] kill pI830->memory_manager checks   Jesse Barnes
• [Intel-gfx] [ANNOUNCE] xf86-video-intel 2.7.1   Carl Worth
• [Intel-gfx] [PATCH] drm/i915: Don't allow binding objects into the last page of the aperture.   Keith Packard
• [Intel-gfx] [PATCH 0/2 V2] drm/i915: enabling sdvo-lvds if edid is not available   Ma Ling
• [Intel-gfx] [PATCH 1/2 V2] drm/i915: Fetch mode line from VBT, then reserve them   Ma Ling
• [Intel-gfx] [PATCH 2/2 V2] drm/i915: Provide mode line from VBT to drm   Ma Ling
• [Intel-gfx] [PATCH V3] drm/i915: sdvo read edid-extensions by i2c bus   Ma Ling
• [Intel-gfx] [PATCH] drm/i915: Set activation periods as 64 cdclk for VGA hot plug detection on G4x platform   Ma Ling
• [Intel-gfx] [PATCH] Set activation periods as 64 cdclk sync up with KMS   Ma Ling
• [Intel-gfx] [PATCH ] drm/i915: Set 965GME pci info sync up with UMS   Ma Ling
• [Intel-gfx] the questions about adding the default mode for LVDS device in KMS mode   yakui_zhao
• [Intel-gfx] [PATCH ] drm/i915: assign short type value without a cast   Ma Ling
• [Intel-gfx] the questions about adding debug info for modeseting in KMS mode   yakui_zhao
• [Intel-gfx] [PATCH ] drm/i915: assign short type value without a cast   Simon Farnsworth
• [Intel-gfx] [RFC] kill pI830->memory_manager checks   Magnus Kessler
• [Intel-gfx] [0/6] drm/i915: Structrue changes to the i915 module for code reuse   Richard Purdie
• [Intel-gfx] [PATCH 1/6] drm/i915: Split up struct drm_i915_private   Richard Purdie
• [Intel-gfx] [PATCH 2/6] drm/i915: Add EXPORT_SYMBOL()s needed for sharing VDC code   Richard Purdie
• [Intel-gfx] [PATCH 3/6] drm/i915: Add IS_POULSBO and IS_MRST helper macros   Richard Purdie
• [Intel-gfx] [PATCH 5/6] drm/i915: Move intel_setup_outputs() out of the common vdc code   Richard Purdie
• [Intel-gfx] [PATCH 4/6] drm/i915: Abstract the gem calls from common code   Richard Purdie
• [Intel-gfx] [PATCH 6/6] drm/i915: Final split into two modules   Richard Purdie
• [Intel-gfx] [PATCH 2/6 v2] drm/i915: Add EXPORT_SYMBOL()s needed for sharing VDC code   Richard Purdie
• [Intel-gfx] the questions about adding debug info for modeseting in KMS mode   Jesse Barnes
• [Intel-gfx] the questions about adding the default mode for LVDS device in KMS mode   Jesse Barnes
• [Intel-gfx] [RFC] i915/acpi: add lid status notification and detection   Jesse Barnes
• [Intel-gfx] [RFC] kill pI830->memory_manager checks   Jesse Barnes
• [Intel-gfx] the questions about adding the default mode for LVDS device in KMS mode   yakui_zhao
• [Intel-gfx] [RFC] i915/acpi: add lid status notification and detection   yakui_zhao
• [Intel-gfx] the questions about adding debug info for modeseting in KMS mode   yakui_zhao
• [Intel-gfx] Dual-display support with 945G/GZ and ADD2-R adapter ?   Teemu Tuominen
• [Intel-gfx] Dual-display support with 945G/GZ and ADD2-R adapter ?   Jin, Gordon
• [Intel-gfx] Dual-display support with 945G/GZ and ADD2-R adapter ?   Teemu Tuominen
• [Intel-gfx] Question on full HD support.   Christiaan van Dijk
• [Intel-gfx] Question on full HD support.   The Fungi
• [Intel-gfx] [PATCH 1/6] drm/i915: Split up struct drm_i915_private   Jesse Barnes
• [Intel-gfx] [PATCH 2/6] drm/i915: Add EXPORT_SYMBOL()s needed for sharing VDC code   Jesse Barnes
• [Intel-gfx] [PATCH 3/6] drm/i915: Add IS_POULSBO and IS_MRST helper macros   Jesse Barnes
• [Intel-gfx] [PATCH 5/6] drm/i915: Move intel_setup_outputs() out of the common vdc code   Jesse Barnes
• [Intel-gfx] [PATCH 4/6] drm/i915: Abstract the gem calls from common code   Jesse Barnes
• [Intel-gfx] [PATCH 6/6] drm/i915: Final split into two modules   Jesse Barnes
• [Intel-gfx] [PATCH V3] drm/i915: sdvo read edid-extensions by i2c bus   Eric Anholt
• [Intel-gfx] [PATCH 1/6] drm/i915: Split up struct drm_i915_private   Richard Purdie
• [Intel-gfx] [PATCH 2/6] drm/i915: Add EXPORT_SYMBOL()s needed for sharing VDC code   Richard Purdie
• [Intel-gfx] [PATCH 3/6] drm/i915: Add IS_POULSBO and IS_MRST helper macros   Richard Purdie
• [Intel-gfx] [PATCH 6/6] drm/i915: Final split into two modules   Richard Purdie
• [Intel-gfx] [PATCH] Set activation periods as 64 cdclk sync up with KMS   Eric Anholt
• [Intel-gfx] [PATCH] drm/i915: Set activation periods as 64 cdclk for VGA hot plug detection on G4x platform   Eric Anholt
• [Intel-gfx] [PATCH] drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.   Eric Anholt
• [Intel-gfx] [PATCH] double buffer cursor updates   Jesse Barnes
• [Intel-gfx] Dual-display support with 945G/GZ and ADD2-R adapter ?   Jin, Gordon
• [Intel-gfx] [PATCH V4] drm/i915: sdvo read edid-extensions by i2c bus   Ma Ling
• [Intel-gfx] [PATCH]drm_i915: remove unnecessary object pin for mode set   Shaohua Li
• [Intel-gfx] [PATCH] Add modesetting pageflip ioctl and corresponding drm event   Kristian Høgsberg
• [Intel-gfx] [PATCH V2] Set activation periods as 64 cdclk sync up with KMS   Ma Ling
• [Intel-gfx] [PATCH V3] Set activation periods as 64 cdclk sync up with KMS   Ma Ling
• [Intel-gfx] [RFC] [Patch] [DRM] :Separate several DRM debug levels   yakui_zhao
• [Intel-gfx] [PATCH] Wait doubled regis to be stable for load pipe detection   Ma Ling
• [Intel-gfx] [PATCH V2] Wait double buffered register to be stable for load pipe detection   Ma Ling
• [Intel-gfx] [PATCH V2] drm/i915: assign short type value without a cast   Ma Ling
• [Intel-gfx] [RFC] [Patch] [DRM] :Separate several DRM debug levels   Dave Airlie
• [Intel-gfx] Dual-display support with 945G/GZ and ADD2-R adapter ?   Teemu Tuominen
• [Intel-gfx] Requesting proposals for a 2.7.1 maintenance release   David Amiel
• [Intel-gfx] [PATCH]drm_i915: remove unnecessary object pin for mode set   Jesse Barnes
• [Intel-gfx] [PATCH] Add modesetting pageflip ioctl and corresponding drm event   Jesse Barnes
• [Intel-gfx] [PATCH] i915/acpi: add lid status notification and detection   Jesse Barnes
• [Intel-gfx] [PATCH] Add modesetting pageflip ioctl and corresponding drm event   Jesse Barnes
• [Intel-gfx] [PATCH] Add modesetting pageflip ioctl and corresponding drm event   Jesse Barnes
• [Intel-gfx] [PATCH] i915: avoid non-atomic sysrq execution   Jesse Barnes
• [Intel-gfx] [PATCH] Only sync XV to vblank when drawing to the frontbuffer.   Eric Anholt
• [Intel-gfx] newbee question   Ingmar Joern
• [Intel-gfx] [PATCH]drm_i915: remove unnecessary object pin for mode set   Florian Mickler
• [Intel-gfx] [PATCH]drm_i915: remove unnecessary object pin for mode set   Shaohua Li
• [Intel-gfx] [RFC] [Patch] [DRM] :Separate several DRM debug levels   yakui_zhao
• [Intel-gfx] [PATCH]DRM i915: IGD big FIFO support   Shaohua Li
• [Intel-gfx] [PATCH V5] drm/i915: sdvo read edid-extensions by i2c bus   Ma Ling
• [Intel-gfx] [PATCH 0/2] drm/i915: multiple sdvo output sync up with 2D   Ma Ling
• [Intel-gfx] [PATCH 1/2] drm/i915: create flexible setup function for init   Ma Ling
• [Intel-gfx] [PATCH 2/2] drm/i915: dynamically re-register real sdvo output   Ma Ling
• [Intel-gfx] Page-Fault in intel 2.7.1   Lampersperger Andreas
• [Intel-gfx] [PATCH 0/2 V2] drm/i915: enabling sdvo-lvds if edid is not available   Jesse Barnes
• [Intel-gfx] [PATCH] Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms.   Keith Packard
• [Intel-gfx] [PATCH] drm/i915: Reuse probed LVDS modes   Li Peng
• [Intel-gfx] DRM/i915 Kernel Warning   Jonas Bonn
• [Intel-gfx] [PATCH] drm/i915: Determine type before initialising connector   Jonas Bonn
• [Intel-gfx] newbee question   Jin, Gordon
• [Intel-gfx] [RFC] i915/acpi: add lid status notification and detection   Matthew Garrett
• [Intel-gfx] [ANNOUNCE] xf86-video-intel 2.7.1   Carl Worth
• [Intel-gfx] [PATCH] i915: support 8xx desktop cursors   Jesse Barnes
• [Intel-gfx] [PATCH] i915: support 8xx desktop cursors   Kristian Høgsberg
• [Intel-gfx] [PATCH] drm/i915: Reuse probed LVDS modes   yakui_zhao
• [Intel-gfx] [PATCH 0/3] Add the default mode for LVDS in KMS mode   yakui_zhao
• [Intel-gfx] [PATCH 1/3] Add the private data for the LVDS connector   yakui_zhao
• [Intel-gfx] [PATCH 2/3] Get the LVDS panel limit and check whether the given modeline is valid   yakui_zhao
• [Intel-gfx] [PATCH 3/3] Add the default modes for LVDS   yakui_zhao
• [Intel-gfx] [Resend] [Patch_v2] DRM/I915: Sync the LVDS panel fitting property with 2D driver   yakui_zhao
• [Intel-gfx] Fwd: [PATCH 2/3] Get the LVDS panel limit and check whether the given modeline is valid   Alexander E. Patrakov
• [Intel-gfx] [PATCH] drm/i915: Sanity check execbuffer arguments before touching state.   Chris Wilson
• [Intel-gfx] [PATCH V2] Wait double buffered register to be stable for load pipe detection   Ma, Ling
• [Intel-gfx] [PATCH] drm/i915: Sanity check execbuffer arguments before touching state.   Chris Wilson
• [Intel-gfx] [PATCH 1/4] drm/i915: Sanity check execbuffer arguments before touching state.   Chris Wilson
• [Intel-gfx] [PATCH 2/4] drm/i915: OR in the COMMAND read domain for the batch buffer.   Chris Wilson
• [Intel-gfx] [PATCH 3/4] drm/i915: Call drm_vblank_post_modeset() on error paths.   Chris Wilson
• [Intel-gfx] [PATCH 4/4] drm/i915: no need to hold mutex for object lookup   Chris Wilson
• [Intel-gfx] [PATCH 2/4] drm/i915: OR in the COMMAND read domain for the batch buffer.   Chris Wilson
• [Intel-gfx] [SDVO-VGA] Chrontel 7317A and choose VGA/TV outputs   Aidan Dixon
• [Intel-gfx] [PATCH V2] Wait double buffered register to be stable for load pipe detection   Carl Worth
• [Intel-gfx] [compiz] compiz swapbuffers patch   Jesse Barnes
• [Intel-gfx] [RFC] i915/acpi: add lid status notification and detection   Jesse Barnes
• [Intel-gfx] Redundant structs in debugfs patch   Ben Gamari
• [Intel-gfx] [PATCH] [DRM] Remove extraneous structures   Ben Gamari
• [Intel-gfx] [PATCH 2/4] drm/i915: OR in the COMMAND read domain for the batch buffer.   Eric Anholt
• [Intel-gfx] [SDVO-VGA] Chrontel 7317A and choose VGA/TV outputs   Ma, Ling
• [Intel-gfx] [RFC] i915/acpi: add lid status notification and detection   Fu Michael
• [Intel-gfx] [RFC] i915/acpi: add lid status notification and detection   Matthew Garrett
• [Intel-gfx] [PATCH V5] drm/i915: sdvo read edid-extensions by i2c bus   Ma, Ling
• [Intel-gfx] Fwd: [PATCH 2/3] Get the LVDS panel limit and check whether the given modeline is valid   yakui_zhao
• [Intel-gfx] [PATCH] drm/i915: Reuse probed LVDS modes   Li Peng
• [Intel-gfx] [SDVO-VGA] Chrontel 7317A and choose VGA/TV outputs   Aidan Dixon
• [Intel-gfx] [PATCH] drm/i915: crt fetch EDID by DVI-I converter sync up with 2D driver   Ma Ling
• [Intel-gfx] [PATCH] drm/i915: crt load pipe detection sync up with 2D driver   Ma Ling
• [Intel-gfx] Crash with q3demo   Hanno Böck
• [Intel-gfx] [SDVO-VGA] Chrontel 7317A and choose VGA/TV outputs   Ma, Ling
• [Intel-gfx] [SDVO-VGA] Chrontel 7317A and choose VGA/TV outputs   Aidan Dixon
• [Intel-gfx] PATCH] drm/i915: Safely SDVO/HDMI detect sync up with 2D driver   Ma Ling
• [Intel-gfx] [SDVO-VGA] Chrontel 7317A and choose VGA/TV outputs   Ma, Ling
• [Intel-gfx] [PATCH] drm/i915: Determine type before initialising connector   Ma Ling
• [Intel-gfx] [PATCH V1] drm: export get and put connector type id   Ma Ling
• [Intel-gfx] [PATCH] drm: Memory fragmentation from lost alignment blocks   Chris Wilson
• [Intel-gfx] Wait time accounting   Ben Gamari
• [Intel-gfx] [PATCH] First stab at doing wait accounting   Ben Gamari
• [Intel-gfx] Another attempt at wait accounting   Ben Gamari
• [Intel-gfx] [PATCH] First stab at doing wait accounting   Ben Gamari
• [Intel-gfx] [PATCH] Wait accounting [ver. 3]   Ben Gamari
• [Intel-gfx] [PATCH] First stab at doing wait accounting   Ben Gamari
• [Intel-gfx] [PATCH V1] drm: export get and put connector type id   Eric Anholt
• [Intel-gfx] [PATCH] drm/i915: crt load pipe detection sync up with 2D driver   Eric Anholt
• [Intel-gfx] [PATCH]DRM i915: IGD big FIFO support   Eric Anholt
• [Intel-gfx] [PATCH] drm/i915: Determine type before initialising connector   Eric Anholt
• [Intel-gfx] [PATCH RFC] Batchbuffer queue latency tracking v.1   Ben Gamari
• [Intel-gfx] [PATCH] First stab at implementing batchbuffer queue latency tracking   Ben Gamari
• [Intel-gfx] [PATCH] Wait time accounting [v.4]   Ben Gamari
• [Intel-gfx] [PATCH] First stab at doing wait accounting   Ben Gamari
• [Intel-gfx] Colour correction.   Alexandre Moreira
• [Intel-gfx] Colour correction.   Peter Clifton
• [Intel-gfx] Colour correction.   Alexandre Moreira
• [Intel-gfx] [PATCH]DRM i915: IGD big FIFO support   Shaohua Li
• [Intel-gfx] [PATCH 0/3] Add the default mode for LVDS in KMS mode   yakui_zhao
• [Intel-gfx] [PATCH 1/3] Add the private data for the LVDS connector   yakui_zhao
• [Intel-gfx] [PATCH 2/3] Get the LVDS panel limit and check whether the given modeline is valid   yakui_zhao
• [Intel-gfx] [PATCH 3/3] Fix EDID for LVDS output device to add the default modes   yakui_zhao
• [Intel-gfx] [Bug #13171] 2.6.30-rc2 + xorg-intel-2.7.0 + DRM_I915_KMS = corruption   Alex Bennee
• [Intel-gfx] [PATCH] Wait accounting [ver. 3]   Chris Wilson
• [Intel-gfx] [PATCH] drm/i915: Determine type before initialising connector   Jesse Barnes
• [Intel-gfx] [PATCH] First stab at doing wait accounting   Chris Wilson
• [Intel-gfx] [PATCH V1] drm: export get and put connector type id   Ma, Ling
• [Intel-gfx] [PATCH V1] drm: export get and put connector type id   Ma, Ling
• [Intel-gfx] [PATCH V2] drm: export get and put connector type id   Ma Ling
• [Intel-gfx] [PATCH V2] drm/i915: crt load pipe detection sync up with 2D driver   Ma Ling
• [Intel-gfx] [PATCH V3] drm: export get and put connector type id   Ma Ling
• [Intel-gfx] [Resend] [Patch_v2] DRM/I915: Sync the LVDS panel fitting property with 2D driver   yakui_zhao
• [Intel-gfx] [PATCH V1] drm: export get and put connector type id   Eric Anholt
• [Intel-gfx] [PATCH] Latest iteration of wait-time accounting patch   Ben Gamari
• [Intel-gfx] [PATCH] [DRM] Implement wait-time accounting for i915   Ben Gamari
• [Intel-gfx] [PATCH] Tweak debugfs ringbuffer_info formatting   Ben Gamari
• [Intel-gfx] [PATCH 1/2] Justify debugfs formatting of acthd field to match others   Ben Gamari
• [Intel-gfx] Fix up 3D rendering on my 865   Eric Anholt
• [Intel-gfx] [PATCH 1/2] drm/i915: Fix tiling pitch handling on 8xx.   Eric Anholt
• [Intel-gfx] [PATCH 2/2] drm/i915: Apply a big hammer to 865 GEM object CPU cache flushing.   Eric Anholt
• [Intel-gfx] [PATCH 0/3] use the sdvo device info parsed from VBT to initialize SDVO device   yakui_zhao
• [Intel-gfx] [PATCH 1/3] Dynamically get the number of child device in general definition block   yakui_zhao
• [Intel-gfx] [PATCH 2/3] parse general definition block to get the SDVO device info   yakui_zhao
• [Intel-gfx] [PATCH 3/3] Initialize the SDVO device based on the sdvo info parsed from VBT   yakui_zhao
• [Intel-gfx] [PATCH 0/2 V2] drm/i915: enabling sdvo-lvds if edid is not available   Ma, Ling
• [Intel-gfx] [RFC] i915/acpi: add lid status notification and detection   Jesse Barnes
• [Intel-gfx] Memory leak using UXA acceleration and EXT_texture_from_pixmap   Garry Bodsworth
• [Intel-gfx] [RFC] i915/acpi: add lid status notification and detection   Fu Michael
• [Intel-gfx] [RFC] [Patch] [DRM] :Separate several DRM debug levels   Jesse Barnes
• [Intel-gfx] [PATCH] drm/i915: Unreference object, not handle   Jonas Bonn
• [Intel-gfx] [PATCH 0/2 V2] drm/i915: enabling sdvo-lvds if edid is not available   Eric Anholt
• [Intel-gfx] [PATCH] drm/i915: Unreference object, not handle   Owain Ainsworth
• [Intel-gfx] [PATCH] drm/i915: Unreference object, not handle   Jonas Bonn
• [Intel-gfx] [PATCH] i915: Set object to gtt domain when faulting it back in   Kristian Høgsberg
• [Intel-gfx] [PATCH] i915: Set object to gtt domain when faulting it back in   Vasily Khoruzhick
• [Intel-gfx] [PATCH] drm/i915: Unreference object, not handle   Eric Anholt
• [Intel-gfx] [PATCH V1] drm: export get and put connector type id   Ma, Ling
• [Intel-gfx] [PATCH] drm/i915: Unreference object, not handle   Jonas Bonn
• [Intel-gfx] regression i915 / video driver   Florian Mickler
• [Intel-gfx] Tearing In Composite XVideo   Garry Bodsworth
• [Intel-gfx] Tearing In Composite XVideo   Garry Bodsworth
• [Intel-gfx] [RFC] [Patch] [DRM] :Separate several DRM debug levels   yakui_zhao
• [Intel-gfx] PATCH] drm/i915: Safely SDVO/HDMI detect sync up with 2D driver   Ma, Ling
• [Intel-gfx] [PATCH 01/17] drm: add newlines to text sysfs files   Keith Packard
• [Intel-gfx] [PATCH 02/17] drm: set permissions on edid file to 0444   Keith Packard
• [Intel-gfx] [PATCH 03/17] drm: Eliminate magic I2C frobbing when reading EDID   Keith Packard
• [Intel-gfx] [PATCH 04/17] drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms.   Keith Packard
• [Intel-gfx] [PATCH 05/17] drm/i915: Don't trim cursor addresses to 11 bits   Keith Packard
• [Intel-gfx] [PATCH 06/17] drm/i915: Require digital monitor on HDMI ports for detect   Keith Packard
• [Intel-gfx] [PATCH 07/17] drm/i915: Change I2C api to pass around i2c_adapters   Keith Packard
• [Intel-gfx] [PATCH 08/17] drm/i915: add per-output hotplug callback   Keith Packard
• [Intel-gfx] [PATCH 09/17] drm/i915: Add Display Port register defines   Keith Packard
• [Intel-gfx] [PATCH 10/17] drm/i915: Add Display Port support   Keith Packard
• [Intel-gfx] [PATCH 11/17] drm/i915: save/restore display port registers across suspend/resume   Keith Packard
• [Intel-gfx] [PATCH 12/17] drm/i915: Import DisplayPort code   Keith Packard
• [Intel-gfx] [PATCH 13/17] drm/i915: Hook up display port   Keith Packard
• [Intel-gfx] [PATCH 14/17] drm/i915: Use hotplug callback to retrain DP link   Keith Packard
• [Intel-gfx] [PATCH 15/17] drm/i915: Use drm_helper_connector_dpms for DisplayPort   Keith Packard
• [Intel-gfx] [PATCH 16/17] drm/i915: Attempt to make DP suspend/resume work a bit more   Keith Packard
• [Intel-gfx] [PATCH 17/17] drm/i915: Track DisplayPort DPMS state to retrain on hotplug as needed   Keith Packard
• [Intel-gfx] [PATCH 0/3] Add the default mode for LVDS in KMS mode   yakui_zhao
• [Intel-gfx] [Resend] [PATCH 1/3] Add the private data for the LVDS connector   yakui_zhao
• [Intel-gfx] [Resend] [PATCH 2/3] Get the LVDS panel limit and check whether the given modeline is valid   yakui_zhao
• [Intel-gfx] [Resend] [PATCH 1/3] Add the private data for the LVDS connector   yakui_zhao
• [Intel-gfx] [Resend] [PATCH 3/3] Fix EDID for LVDS output device to add the default modes   yakui_zhao
• [Intel-gfx] [PATCH 0/3] use the sdvo device info parsed from VBT to initialize SDVO device   yakui_zhao
• [Intel-gfx] [PATCH 1/3] Dynamically get the number of child device in general definition block   yakui_zhao
• [Intel-gfx] [PATCH 2/3] parse general definition block to get the SDVO device info   yakui_zhao
• [Intel-gfx] [PATCH 3/3] Initialize the SDVO device based on the sdvo info parsed from VBT   yakui_zhao
• [Intel-gfx] [PATCH] drm/i915: Set correct voltage level override values   Ma Ling
• [Intel-gfx] [PATCH] Set correct voltage level override values   Ma Ling
• [Intel-gfx] [PATCH] drm/i915: Construct all possible sdvo outputs for one sdvo port   Ma Ling
• [Intel-gfx] [PATCH 0/3] [DRM/I915] use the sdvo device info parsed from VBT to initialize SDVO device   yakui_zhao
• [Intel-gfx] [PATCH 1/3][DRM/I915] Add the definition of child_device_config   yakui_zhao
• [Intel-gfx] [PATCH 2/3] [DRM/I915] parse general definition block to get the SDVO device info   yakui_zhao
• [Intel-gfx] [PATCH 3/3] [DRM/I915] Initialize the SDVO device based on the sdvo info parsed from VBT   yakui_zhao
• [Intel-gfx] [RFC] [Patch] [DRM] :Separate several DRM debug levels   Jesse Barnes
• [Intel-gfx] [PATCH] [coding style] Correct indentation.   Paul Menzel
• [Intel-gfx] [PATCH] Typo.   Paul Menzel

Last message date: Sun May 31 20:38:10 CEST 2009
Archived on: Sat Dec 6 09:11:03 CET 2014

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...