March 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Mar 1 04:10:14 PST 2013
Ending: Sun Mar 31 23:33:47 PDT 2013
Messages: 407

• [pulseaudio-discuss] [PATCH] default.pa: Load module-jackdbus-detect with channels=2 by default   David Henningsson
  • [pulseaudio-discuss] [PATCH] default.pa: Load module-jackdbus-detect with channels=2 by default   Arun Raghavan
    • [pulseaudio-discuss] [PATCH] default.pa: Load module-jackdbus-detect with channels=2 by default   David Henningsson
• [pulseaudio-discuss] patch to add low pass filtered lfe output via module-lfe-lp   Alexander E. Patrakov
• [pulseaudio-discuss] [RFC PATCH] First draft implementation of better drain reporting   David Henningsson
  • [pulseaudio-discuss] [RFC PATCH] First draft implementation of better drain reporting   Dmitri Paduchikh
    • [pulseaudio-discuss] [RFC PATCH] First draft implementation of better drain reporting   Tanu Kaskinen
      • [pulseaudio-discuss] [RFC PATCH] First draft implementation of better drain reporting   David Henningsson
  • [pulseaudio-discuss] [RFC PATCH] First draft implementation of better drain reporting   Tanu Kaskinen
    • [pulseaudio-discuss] [RFC PATCH] First draft implementation of better drain reporting   David Henningsson
      • [pulseaudio-discuss] [RFC PATCH] First draft implementation of better drain reporting   Tanu Kaskinen
• [pulseaudio-discuss] Traktor Audio 2 profile   Elefant
  • [pulseaudio-discuss] Traktor Audio 2 profile   Tanu Kaskinen
• [pulseaudio-discuss] Traktor Audio 2 profile   Tanu Kaskinen
• [pulseaudio-discuss] patch to add low pass filtered lfe output via module-lfe-lp   Tanu Kaskinen
• [pulseaudio-discuss] Progress since PulseConf   Jaska Uimonen
• [pulseaudio-discuss] Progress since PulseConf   David Henningsson
  • [pulseaudio-discuss] Progress since PulseConf   Jaska Uimonen
• [pulseaudio-discuss] Progress since PulseConf   David Henningsson
  • [pulseaudio-discuss] Progress since PulseConf   Tanu Kaskinen
    • [pulseaudio-discuss] Progress since PulseConf   David Henningsson
      • [pulseaudio-discuss] Progress since PulseConf   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 0/4] bluetooth: Port names based on form factor   Mikel Astiz
  • [pulseaudio-discuss] [PATCH v2 1/4] bluetooth: Use enum to represent form factors   Mikel Astiz
  • [pulseaudio-discuss] [PATCH v2 2/4] bluetooth: Add specific form factor for phones   Mikel Astiz
  • [pulseaudio-discuss] [PATCH v2 3/4] bluetooth: Use form factor to set port name and description   Mikel Astiz
    • [pulseaudio-discuss] [PATCH v2 3/4] bluetooth: Use form factor to set port name and description   David Henningsson
  • [pulseaudio-discuss] [PATCH v2 4/4] Revert "card: Support adding ports dynamically"   Mikel Astiz
• [pulseaudio-discuss] [PATCH] modules: add module-remap-source   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCHv2 0/4] modules: add module-remap-source   Stefan Huber
    • [pulseaudio-discuss] [PATCHv2 1/4] modules: add module-remap-source   Stefan Huber
    • [pulseaudio-discuss] [PATCHv2 3/4] module-virtual-source: remove redundant checks and callbacks   Stefan Huber
    • [pulseaudio-discuss] [PATCHv2 4/4] modules: remove obsolete comment on PA_SOURCE_OUTPUT_DONT_INHIBIT_AUTO_SUSPEND   Stefan Huber
    • [pulseaudio-discuss] [PATCHv2 0/4] modules: add module-remap-source   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCHv2 0/4] modules: add module-remap-source   Thomas Martitz
• [pulseaudio-discuss] [PATCHv2 2/4] modules: Remove obsolete source_output_may_move_to_cb()   Stefan Huber
  • [pulseaudio-discuss] [PATCHv2 2/4] modules: Remove obsolete source_output_may_move_to_cb()   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCHv2 2/4] modules: Remove obsolete source_output_may_move_to_cb()   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCHv3] modules: Remove obsolete may_move_to callbacks   Stefan Huber
      • [pulseaudio-discuss] [PATCHv3] modules: Remove obsolete may_move_to callbacks   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 0/4] bluetooth: Port names based on form factor   Mikel Astiz
  • [pulseaudio-discuss] [PATCH v3 1/4] bluetooth: Use enum to represent form factors   Mikel Astiz
  • [pulseaudio-discuss] [PATCH v3 2/4] bluetooth: Add specific form factor for phones   Mikel Astiz
  • [pulseaudio-discuss] [PATCH v3 3/4] bluetooth: Use form factor to set port name and description   Mikel Astiz
  • [pulseaudio-discuss] [PATCH v3 4/4] Revert "card: Support adding ports dynamically"   Mikel Astiz
    • [pulseaudio-discuss] [PATCH v3 4/4] Revert "card: Support adding ports dynamically"   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH v3 4/4] Revert "card: Support adding ports dynamically"   Mikel Astiz
      • [pulseaudio-discuss] [PATCH v3 4/4] Revert "card: Support adding ports dynamically"   David Henningsson
      • [pulseaudio-discuss] [PATCH v3 4/4] Revert "card: Support adding ports dynamically"   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH v3 0/4] bluetooth: Port names based on form factor   David Henningsson
• [pulseaudio-discuss] [PATCH v2] Second draft implementation of better drain reporting   David Henningsson
  • [pulseaudio-discuss] [PATCH v2] Second draft implementation of better drain reporting   Dmitri Paduchikh
    • [pulseaudio-discuss] [PATCH v2] Second draft implementation of better drain reporting   David Henningsson
• [pulseaudio-discuss] [PATCH 1/2] need automake 1.11 in bootstrap.sh   Alam Arias
  • [pulseaudio-discuss] [PATCH 1/2] need automake 1.11 in bootstrap.sh   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/2] added back support for gtkmm-2.4 builds   Alam Arias
  • [pulseaudio-discuss] [PATCH 2/2] added back support for gtkmm-2.4 builds   Tanu Kaskinen
• [pulseaudio-discuss] [ANNOUNCE] PAVUControl 2.0   Arun Raghavan
• [pulseaudio-discuss] Teamspeak and Media Player Set Up   Justin Yong
• [pulseaudio-discuss] [PATCH for pavucontrol] build-sys: Use autoreconf in bootstrap.sh   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH for pavucontrol] build-sys: Use autoreconf in bootstrap.sh   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] module: Don't print possibly incorrect message   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] module: Don't print possibly incorrect message   David Henningsson
    • [pulseaudio-discuss] [PATCH] module: Don't print possibly incorrect message   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH] module: Don't print possibly incorrect message   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v1] bluetooth: Dynamically change outgoing MTU   Mikel Astiz
  • [pulseaudio-discuss] [PATCH v1] bluetooth: Dynamically change outgoing MTU   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH v1] bluetooth: Dynamically change outgoing MTU   Mikel Astiz
      • [pulseaudio-discuss] [PATCH v1] bluetooth: Dynamically change outgoing MTU   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH v1] bluetooth: Dynamically change outgoing MTU   Mikel Astiz
      • [pulseaudio-discuss] [PATCH v1] bluetooth: Dynamically change outgoing MTU   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2] pavucontrol: add support for AAC pass-through   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] update protocol version by the new value in format_info   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] udev: Add tsched_buffer_size module argument   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] ladspa: Use volume sharing.   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] pulse: Document the operation state behavior on context disconnection.   Tanu Kaskinen
• [pulseaudio-discuss] [pulseuadio-discuss] [PATCH] port to gtk+-3.0   Tanu Kaskinen
• [pulseaudio-discuss] can i set a max volume to protect my hearing with pulse audio?   Bearcat Şándor
  • [pulseaudio-discuss] can i set a max volume to protect my hearing with pulse audio?   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 7/9] proplist: Add pa_proplist_update_info   David Henningsson
  • [pulseaudio-discuss] [PATCH v2 7/9] proplist: Add pa_proplist_update_info   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH v2 7/9] proplist: Add pa_proplist_update_info   David Henningsson
• [pulseaudio-discuss] [PATCH v2 6/9] device-port: Add "linked" flag   David Henningsson
  • [pulseaudio-discuss] [PATCH v2 6/9] device-port: Add "linked" flag   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH v2 6/9] device-port: Add "linked" flag   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH v2 6/9] device-port: Add "linked" flag   David Henningsson
      • [pulseaudio-discuss] [PATCH v2 6/9] device-port: Add "linked" flag   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] loopback: Fix assertion triggered if move fails   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 0/4] Some bug fixes   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 1/4] loopback: Fix segfault in may_move_to() callbacks   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 2/4] filter-apply: Fix segfault with moving streams   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 3/4] loopback: Flush asyncmsgq from the right context   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 4/4] alsa: Don't move streams when changing profiles   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 0/4] Some bug fixes   David Henningsson
  • [pulseaudio-discuss] [PATCH 0/4] Some bug fixes   Tanu Kaskinen
• [pulseaudio-discuss] Cmake for PA   D K
  • [pulseaudio-discuss] Cmake for PA   Ansis Māliņš
    • [pulseaudio-discuss] Cmake for PA   D K
      • [pulseaudio-discuss] Cmake for PA   Tanu Kaskinen
      • [pulseaudio-discuss] Cmake for PA   D K
      • [pulseaudio-discuss] Cmake for PA   Tanu Kaskinen
• [pulseaudio-discuss] How To Share Audio?   ninja mocha
  • [pulseaudio-discuss] How To Share Audio?   Tanu Kaskinen
    • [pulseaudio-discuss] How To Share Audio?   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v1 0/4] Store volume information in the porst struct.   poljar (Damir Jelić)
  • [pulseaudio-discuss] [PATCH v1 1/4] device-port: Add volume to the ports struct.   poljar (Damir Jelić)
    • [pulseaudio-discuss] [PATCH v1 1/4] device-port: Add volume to the ports struct.   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH v1 2/4] card-restore: Save/restore volume for the ports.   poljar (Damir Jelić)
    • [pulseaudio-discuss] [PATCH v1 2/4] card-restore: Save/restore volume for the ports.   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH v1 3/4] sink: Inherit the volume from the active port.   poljar (Damir Jelić)
    • [pulseaudio-discuss] [PATCH v1 3/4] sink: Inherit the volume from the active port.   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH v1 4/4] device-restore: Remove the ability to restore volumes for sinks.   poljar (Damir Jelić)
    • [pulseaudio-discuss] [PATCH v1 4/4] device-restore: Remove the ability to restore volumes for sinks.   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH v1 4/4] device-restore: Remove the ability to restore volumes for sinks.   poljar (Damir Jelić)
      • [pulseaudio-discuss] [PATCH v1 4/4] device-restore: Remove the ability to restore volumes for sinks.   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 0/3] ZSH completion fixes   poljar (Damir Jelić)
  • [pulseaudio-discuss] [PATCH 1/3] zsh-completion: Add support for remote servers.   poljar (Damir Jelić)
  • [pulseaudio-discuss] [PATCH 2/3] zsh-completion: Add support for the new pactl commands.   poljar (Damir Jelić)
  • [pulseaudio-discuss] [PATCH 3/3] zsh-completion: Fix pacat completion.   poljar (Damir Jelić)
  • [pulseaudio-discuss] [PATCH 0/3] ZSH completion fixes   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] Third draft implementation of better drain reporting   David Henningsson
  • [pulseaudio-discuss] [PATCH] Third draft implementation of better drain reporting   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] Third draft implementation of better drain reporting   Dmitri Paduchikh
    • [pulseaudio-discuss] [PATCH] Third draft implementation of better drain reporting   David Henningsson
• [pulseaudio-discuss] [PATCH v2 2/9] dbus: Track the default sink and source with hooks   David Henningsson
  • [pulseaudio-discuss] [PATCH v2 2/9] dbus: Track the default sink and source with hooks   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH v2 2/9] dbus: Track the default sink and source with hooks   David Henningsson
      • [pulseaudio-discuss] [PATCH v2 2/9] dbus: Track the default sink and source with hooks   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH v2 2/9] dbus: Track the default sink and source with hooks   David Henningsson
      • [pulseaudio-discuss] [PATCH v2 2/9] dbus: Track the default sink and source with hooks   Tanu Kaskinen
• [pulseaudio-discuss] New Module: module-lfe-lp   Justin Chudgar
  • [pulseaudio-discuss] New Module: module-lfe-lp   Alexander E. Patrakov
    • [pulseaudio-discuss] New Module: module-lfe-lp   Tanu Kaskinen
    • [pulseaudio-discuss] New Module: module-lfe-lp   Justin Chudgar
      • [pulseaudio-discuss] New Module: module-lfe-lp   Tanu Kaskinen
      • [pulseaudio-discuss] New Module: module-lfe-lp   Alexander E. Patrakov
  • [pulseaudio-discuss] New Module: module-lfe-lp   Alexander E. Patrakov
    • [pulseaudio-discuss] New Module: module-lfe-lp   Justin Chudgar
  • [pulseaudio-discuss] New Module: module-lfe-lp   Alexander E. Patrakov
    • [pulseaudio-discuss] New Module: module-lfe-lp   Matthew Robbetts
      • [pulseaudio-discuss] New Module: module-lfe-lp   Alexander E. Patrakov
      • [pulseaudio-discuss] New Module: module-lfe-lp   Matthew Robbetts
      • [pulseaudio-discuss] New Module: module-lfe-lp   Alexander E. Patrakov
      • [pulseaudio-discuss] New Module: module-lfe-lp   Tanu Kaskinen
      • [pulseaudio-discuss] New Module: module-lfe-lp   Alexander E. Patrakov
      • [pulseaudio-discuss] New Module: module-lfe-lp   Tanu Kaskinen
      • [pulseaudio-discuss] New Module: module-lfe-lp   Justin Chudgar
      • [pulseaudio-discuss] New Module: module-lfe-lp   Alexander E. Patrakov
• [pulseaudio-discuss] Note Regarding IDEs -- Eclipse CDT Works   Justin Chudgar
  • [pulseaudio-discuss] Note Regarding IDEs -- Eclipse CDT Works   Tanu Kaskinen
• [pulseaudio-discuss] Jack, pulse, skype and google talk   Bearcat Şándor
  • [pulseaudio-discuss] Jack, pulse, skype and google talk   Len Ovens
    • [pulseaudio-discuss] Jack, pulse, skype and google talk   Tanu Kaskinen
      • [pulseaudio-discuss] Jack, pulse, skype and google talk   Len Ovens
      • [pulseaudio-discuss] Jack, pulse, skype and google talk   David Henningsson
• [pulseaudio-discuss] Expand the simple API?   David Henningsson
  • [pulseaudio-discuss] Expand the simple API?   Tanu Kaskinen
    • [pulseaudio-discuss] Expand the simple API?   Thomas Martitz
      • [pulseaudio-discuss] Expand the simple API?   Tanu Kaskinen
      • [pulseaudio-discuss] Expand the simple API?   David Henningsson
      • [pulseaudio-discuss] Expand the simple API?   Tanu Kaskinen
      • [pulseaudio-discuss] Expand the simple API?   David Henningsson
      • [pulseaudio-discuss] Expand the simple API?   Tanu Kaskinen
      • [pulseaudio-discuss] Expand the simple API?   Thomas Martitz
      • [pulseaudio-discuss] Expand the simple API?   Thomas Martitz
    • [pulseaudio-discuss] Expand the simple API?   David Henningsson
      • [pulseaudio-discuss] Expand the simple API?   Tanu Kaskinen
• [pulseaudio-discuss] Wiki problems   Tanu Kaskinen
  • [pulseaudio-discuss] Wiki problems   Ansis Māliņš
    • [pulseaudio-discuss] Wiki problems   Tanu Kaskinen
      • [pulseaudio-discuss] Wiki problems   Arun Raghavan
      • [pulseaudio-discuss] Wiki problems   Ansis Māliņš
      • [pulseaudio-discuss] Wiki problems   Arun Raghavan
      • [pulseaudio-discuss] Wiki problems   Tanu Kaskinen
      • [pulseaudio-discuss] Wiki problems   Arun Raghavan
• [pulseaudio-discuss] [PATCH 0/2] Improve default buffer latency parameters   David Henningsson
  • [pulseaudio-discuss] [PATCH 2/2] protocol-native: Lower default minreq in low-latency scenarios   David Henningsson
  • [pulseaudio-discuss] [PATCH 0/2] Improve default buffer latency parameters   David Henningsson
    • [pulseaudio-discuss] [PATCH 0/2] Improve default buffer latency parameters   Peter Meerwald
• [pulseaudio-discuss] [PATCH 1/2] protocol-native: Ensure tlength is not set higher than maxlength   David Henningsson
• [pulseaudio-discuss] [PATCH] tests: Move ipacl-tests to TESTS_norun   David Henningsson
  • [pulseaudio-discuss] [PATCH] tests: Move ipacl-tests to TESTS_norun   David Henningsson
• [pulseaudio-discuss] GSoC: Call for mentors   Tanu Kaskinen
• [pulseaudio-discuss] GSoC: Call for project ideas   Tanu Kaskinen
  • [pulseaudio-discuss] GSoC: Call for project ideas   Toby Smithe
    • [pulseaudio-discuss] GSoC: Call for project ideas   Thomas Martitz
      • [pulseaudio-discuss] GSoC: Call for project ideas   Toby St Clere Smithe
      • [pulseaudio-discuss] GSoC: Call for project ideas   Len Ovens
    • [pulseaudio-discuss] GSoC: Call for project ideas   David Henningsson
      • [pulseaudio-discuss] GSoC: Call for project ideas   Ian Malone
      • [pulseaudio-discuss] GSoC: Call for project ideas   David Henningsson
    • [pulseaudio-discuss] GSoC: Call for project ideas   Ian Malone
    • [pulseaudio-discuss] GSoC: Call for project ideas   Arun Raghavan
      • [pulseaudio-discuss] GSoC: Call for project ideas   Tanu Kaskinen
      • [pulseaudio-discuss] GSoC: Call for project ideas   Toby St Clere Smithe
      • [pulseaudio-discuss] GSoC: Call for project ideas   Arun Raghavan
      • [pulseaudio-discuss] GSoC: Call for project ideas   Tanu Kaskinen
      • [pulseaudio-discuss] GSoC: Call for project ideas   Toby St Clere Smithe
      • [pulseaudio-discuss] GSoC: Call for project ideas   Arun Raghavan
      • [pulseaudio-discuss] GSoC: Call for project ideas   Tanu Kaskinen
• [pulseaudio-discuss] GSoC: Call for easy bugs   Tanu Kaskinen
• [pulseaudio-discuss] PulseAudio / Jack main purposes in life?   Bill Turner, WB4ALM
  • [pulseaudio-discuss] PulseAudio / Jack main purposes in life?   Len Ovens
    • [pulseaudio-discuss] PulseAudio / Jack main purposes in life?   Bill Turner, WB4ALM
      • [pulseaudio-discuss] PulseAudio / Jack main purposes in life?   Len Ovens
• [pulseaudio-discuss] Expand the simple API?   David Henningsson
• [pulseaudio-discuss] Mono Upmixing Only   Carl Gridley
  • [pulseaudio-discuss] Mono Upmixing Only   Tanu Kaskinen
    • [pulseaudio-discuss] Mono Upmixing Only   Carl Gridley
• [pulseaudio-discuss] Sound streaming over network using pulseaudio. Newcomer questions.   vitaly.repin at gmail.com
  • [pulseaudio-discuss] Sound streaming over network using pulseaudio. Newcomer questions.   Tanu Kaskinen
    • [pulseaudio-discuss] Sound streaming over network using pulseaudio. Newcomer questions.   vitaly.repin at gmail.com
      • [pulseaudio-discuss] Sound streaming over network using pulseaudio. Newcomer questions.   Tanu Kaskinen
• [pulseaudio-discuss] Freeze soon?   Tanu Kaskinen
  • [pulseaudio-discuss] Freeze soon?   David Henningsson
    • [pulseaudio-discuss] Freeze soon?   Tanu Kaskinen
      • [pulseaudio-discuss] Freeze soon?   David Henningsson
      • [pulseaudio-discuss] Freeze soon?   Tanu Kaskinen
  • [pulseaudio-discuss] Freeze soon?   Tanu Kaskinen
    • [pulseaudio-discuss] Freeze soon?   Arun Raghavan
      • [pulseaudio-discuss] Freeze soon?   Tanu Kaskinen
    • [pulseaudio-discuss] Freeze soon?   Tanu Kaskinen
• [pulseaudio-discuss] Wish list   Len Ovens
  • [pulseaudio-discuss] Wish list   Tanu Kaskinen
• [pulseaudio-discuss] Better JACK Configurability   Tanu Kaskinen
• [pulseaudio-discuss] Scarlett interface as default device   Rodolfo Thomazelli
  • [pulseaudio-discuss] Scarlett interface as default device   Len Ovens
    • [pulseaudio-discuss] Scarlett interface as default device   Rodolfo Thomazelli
      • [pulseaudio-discuss] Scarlett interface as default device   Len Ovens
      • [pulseaudio-discuss] Scarlett interface as default device   Daniel Mack
      • [pulseaudio-discuss] Scarlett interface as default device   Rodolfo Thomazelli
• [pulseaudio-discuss] [PATCH 0/3] rtp: Configurable source IP   Robin H. Johnson
• [pulseaudio-discuss] Threaded Main Loop data callbacks   Mitchell Fang
  • [pulseaudio-discuss] Threaded Main Loop data callbacks   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] resampler: Always remix mono-only streams   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] resampler: Always remix mono-only streams   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH v2] resampler: Always remix between mono and non-mono   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH v3] resampler: Always remix between mono and non-mono   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2] bluetooth: Read SCO MTU from socket options   Mikel Astiz
  • [pulseaudio-discuss] [PATCH v2] bluetooth: Read SCO MTU from socket options   Tanu Kaskinen
• [pulseaudio-discuss] Pulseaudio randomly resets   Helmar Schütz
  • [pulseaudio-discuss] Pulseaudio randomly resets   Tanu Kaskinen
    • [pulseaudio-discuss] Pulseaudio randomly resets   Helmar Schütz
      • [pulseaudio-discuss] Pulseaudio randomly resets   Tanu Kaskinen
      • [pulseaudio-discuss] Pulseaudio randomly resets   Helmar Schütz
      • [pulseaudio-discuss] Pulseaudio randomly resets   Tanu Kaskinen
      • [pulseaudio-discuss] Pulseaudio randomly resets   Helmar Schütz
      • [pulseaudio-discuss] Pulseaudio randomly resets   Tanu Kaskinen
      • [pulseaudio-discuss] Pulseaudio randomly resets   Helmar Schütz
      • [pulseaudio-discuss] Pulseaudio randomly resets   Thomas Martitz
• [pulseaudio-discuss] Restoring connections of ALSA emulation clients   Phil Frost
  • [pulseaudio-discuss] Restoring connections of ALSA emulation clients   Tanu Kaskinen
    • [pulseaudio-discuss] Restoring connections of ALSA emulation clients   Phil Frost
• [pulseaudio-discuss] [PATCH v2 0/3] Better buffer attr for low latency   David Henningsson
  • [pulseaudio-discuss] [PATCH v2 2/3] protocol-native: Lower default minreq in low-latency scenarios   David Henningsson
    • [pulseaudio-discuss] [PATCH v2 2/3] protocol-native: Lower default minreq in low-latency scenarios   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH v2 3/3] client API: Document buffer_attr.maxlength   David Henningsson
    • [pulseaudio-discuss] [PATCH v2 3/3] client API: Document buffer_attr.maxlength   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH v2 3/3] client API: Document buffer_attr.maxlength   David Henningsson
      • [pulseaudio-discuss] [PATCH v2 3/3] client API: Document buffer_attr.maxlength   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 1/3] protocol-native: Ensure tlength is not set higher than maxlength   David Henningsson
  • [pulseaudio-discuss] [PATCH v2 1/3] protocol-native: Ensure tlength is not set higher than maxlength   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH v2 1/3] protocol-native: Ensure tlength is not set higher than maxlength   David Henningsson
      • [pulseaudio-discuss] [PATCH v2 1/3] protocol-native: Ensure tlength is not set higher than maxlength   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] alsa-mixer: Add path for Headset Microphone   David Henningsson
  • [pulseaudio-discuss] [PATCH 1/2] alsa-mixer: Add path for Headset Microphone   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/2] alsa-mixer: Support more phantom jacks   David Henningsson
• [pulseaudio-discuss] Konfirmasi Jadwal Pelatihan April 2013 - DMTc   DMTc
• [pulseaudio-discuss] [PATCH] tests: Add tests for alsa-mixer paths   David Henningsson
  • [pulseaudio-discuss] [PATCH] tests: Add tests for alsa-mixer paths   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH] tests: Add tests for alsa-mixer paths   David Henningsson
      • [pulseaudio-discuss] [PATCH] tests: Add tests for alsa-mixer paths   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH] tests: Add tests for alsa-mixer paths   Tanu Kaskinen
      • [pulseaudio-discuss] [PATCH] tests: Add tests for alsa-mixer paths   David Henningsson
• [pulseaudio-discuss] Improvements related to configuration   Tanu Kaskinen
  • [pulseaudio-discuss] Improvements related to configuration   David Henningsson
    • [pulseaudio-discuss] Improvements related to configuration   Tanu Kaskinen
      • [pulseaudio-discuss] Improvements related to configuration   Tanu Kaskinen
      • [pulseaudio-discuss] Improvements related to configuration   David Henningsson
      • [pulseaudio-discuss] Improvements related to configuration   Tanu Kaskinen
      • [pulseaudio-discuss] Improvements related to configuration   Alexander E. Patrakov
      • [pulseaudio-discuss] Improvements related to configuration   Tanu Kaskinen
      • [pulseaudio-discuss] Improvements related to configuration   Arun Raghavan
      • [pulseaudio-discuss] Improvements related to configuration   Tanu Kaskinen
• [pulseaudio-discuss] How can I forward X display but not pulseaudio?   Boyd Kelly
  • [pulseaudio-discuss] How can I forward X display but not pulseaudio?   Len Ovens
    • [pulseaudio-discuss] How can I forward X display but not pulseaudio?   Boyd Kelly
      • [pulseaudio-discuss] How can I forward X display but not pulseaudio?   Len Ovens
• [pulseaudio-discuss] [PATCH] Use AM_CPPFLAGS for preprocessor arguments   Javier Jardón
  • [pulseaudio-discuss] [PATCH] src/Makefile: Use AM_CPPFLAGS instead AM_CFLAGS for preprocessor arguments   Javier Jardón
    • [pulseaudio-discuss] [PATCH] src/Makefile: Use AM_CPPFLAGS instead AM_CFLAGS for preprocessor arguments   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 1/3] protocol-native: Ensure tlength is not set higher than maxlength   David Henningsson
  • [pulseaudio-discuss] [PATCH v3 2/3] protocol-native: Lower default minreq in low-latency scenarios   David Henningsson
  • [pulseaudio-discuss] [PATCH v3 3/3] client API: Document buffer_attr.maxlength   David Henningsson
  • [pulseaudio-discuss] [PATCH v3 1/3] protocol-native: Ensure tlength is not set higher than maxlength   Tanu Kaskinen
• [pulseaudio-discuss] GSoC idea   Peter Meerwald
  • [pulseaudio-discuss] GSoC idea   Tanu Kaskinen
    • [pulseaudio-discuss] GSoC idea   Peter Meerwald
      • [pulseaudio-discuss] GSoC idea   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] resmple: Switch to speex-float-1 by default   Arun Raghavan
  • [pulseaudio-discuss] [PATCH] resmple: Switch to speex-float-1 by default   Peter Meerwald
  • [pulseaudio-discuss] [PATCH] resmple: Switch to speex-float-1 by default   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] alsa-mixer: It's valid to have zero elements in a path   David Henningsson
  • [pulseaudio-discuss] [PATCH] alsa-mixer: It's valid to have zero elements in a path   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] alsa-mixer: Add "Headset Playback|Capture" element   David Henningsson
  • [pulseaudio-discuss] [PATCH] alsa-mixer: Add "Headset Playback|Capture" element   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH] alsa-mixer: Add "Headset Playback|Capture" element   David Henningsson
      • [pulseaudio-discuss] [PATCH] alsa-mixer: Add "Headset Playback|Capture" element   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] device-port: Introduce port_new_data struct.   poljar (Damir Jelić)
  • [pulseaudio-discuss] [PATCH] device-port: Introduce port_new_data struct.   Tanu Kaskinen
    • [pulseaudio-discuss] [PATCH] device-port: Introduce port_new_data struct.   poljar (Damir Jelić)
      • [pulseaudio-discuss] [PATCH] device-port: Introduce port_new_data struct.   Tanu Kaskinen
• [pulseaudio-discuss] Rewind Handling in module-lfe-lp   Justin Chudgar
  • [pulseaudio-discuss] Rewind Handling in module-lfe-lp   Tanu Kaskinen
    • [pulseaudio-discuss] Rewind Handling in module-lfe-lp   Justin Chudgar
      • [pulseaudio-discuss] Rewind Handling in module-lfe-lp   Tanu Kaskinen
  • [pulseaudio-discuss] Rewind Handling in module-lfe-lp   Alexander E. Patrakov
  • [pulseaudio-discuss] Rewind Handling in module-lfe-lp   Alexander E. Patrakov
• [pulseaudio-discuss] [RFC 00/24] Add support for Bluetooth HFP Handsfree Unit implemented in oFono   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 04/24] bluetooth: Track org.ofono service   jprvita at gmail.com
    • [pulseaudio-discuss] [RFC 04/24] bluetooth: Track org.ofono service   Mikel Astiz
      • [pulseaudio-discuss] [RFC 04/24] bluetooth: Track org.ofono service   João Paulo Rechi Vita
      • [pulseaudio-discuss] [RFC 04/24] bluetooth: Track org.ofono service   Tanu Kaskinen
  • [pulseaudio-discuss] [RFC 05/24] bluetooth: Register Handsfree Audio Agent object path on the bus   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 06/24] bluetooth: Register Handsfree Audio Agent with oFono   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 07/24] bluetooth: Unregister Handsfree Audio Agent with oFono   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 08/24] bluetooth: Implement Handsfree Audio Agent Release()   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 09/24] bluetooth: List HF cards from oFono   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 10/24] bluetooth: Parse HF cards properties   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 11/24] bluetooth: Add new profile type PROFILE_HFP_AG   jprvita at gmail.com
    • [pulseaudio-discuss] [RFC 11/24] bluetooth: Add new profile type PROFILE_HFP_AG   Mikel Astiz
      • [pulseaudio-discuss] [RFC 11/24] bluetooth: Add new profile type PROFILE_HFP_AG   João Paulo Rechi Vita
      • [pulseaudio-discuss] [RFC 11/24] bluetooth: Add new profile type PROFILE_HFP_AG   Mikel Astiz
  • [pulseaudio-discuss] [RFC 12/24] bluetooth: Create a pa_bluetooth_transport for each HF card   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 13/24] bluetooth: Track org.ofono.HandsfreeAudioManager.CardAdded   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 15/24] bluetooth: Do not track new UUIDs   jprvita at gmail.com
    • [pulseaudio-discuss] [RFC 15/24] bluetooth: Do not track new UUIDs   Mikel Astiz
      • [pulseaudio-discuss] [RFC 15/24] bluetooth: Do not track new UUIDs   João Paulo Rechi Vita
  • [pulseaudio-discuss] [RFC 16/24] bluetooth: Create card profiles based on transport   jprvita at gmail.com
    • [pulseaudio-discuss] [RFC 16/24] bluetooth: Create card profiles based on transport   Mikel Astiz
      • [pulseaudio-discuss] [RFC 16/24] bluetooth: Create card profiles based on transport   João Paulo Rechi Vita
      • [pulseaudio-discuss] [RFC 16/24] bluetooth: Create card profiles based on transport   Mikel Astiz
  • [pulseaudio-discuss] [RFC 17/24] bluetooth: Create card profile for PROFILE_HFP_AG   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 18/24] bluetooth: Configure transport for PROFILE_HFP_AG   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 19/24] bluetooth: Create sink and source for PROFILE_HFP_AG   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 20/24] bluetooth: Implement Handsfree Audio Agent NewConnection()   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 21/24] bluetooth: Fix stream setup for PROFILE_HFP_AG   jprvita at gmail.com
    • [pulseaudio-discuss] [RFC 21/24] bluetooth: Fix stream setup for PROFILE_HFP_AG   Mikel Astiz
      • [pulseaudio-discuss] [RFC 21/24] bluetooth: Fix stream setup for PROFILE_HFP_AG   João Paulo Rechi Vita
      • [pulseaudio-discuss] [RFC 21/24] bluetooth: Fix stream setup for PROFILE_HFP_AG   Mikel Astiz
  • [pulseaudio-discuss] [RFC 22/24] bluetooth: Make the I/O thread aware of PROFILE_HFP_AG   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 23/24] bluetooth: Suspend source and sink for PROFILE_HFP_AG   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 24/24] bluetooth: Load module-loopback for hfp_ag   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 00/24] Add support for Bluetooth HFP Handsfree Unit implemented in oFono   Tanu Kaskinen
• [pulseaudio-discuss] [RFC 01/24] bluetooth: Remove unnecessary braces   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 01/24] bluetooth: Remove unnecessary braces   Mikel Astiz
    • [pulseaudio-discuss] [RFC 01/24] bluetooth: Remove unnecessary braces   João Paulo Rechi Vita
• [pulseaudio-discuss] [RFC 02/24] bluetooth: Fix identation   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 02/24] bluetooth: Fix identation   Mikel Astiz
• [pulseaudio-discuss] [RFC 03/24] bluetooth: Improve code readability   jprvita at gmail.com
  • [pulseaudio-discuss] [RFC 03/24] bluetooth: Improve code readability   Mikel Astiz
• [pulseaudio-discuss] [RFC 14/24] bluetooth: Track org.ofono.HandsfreeAudioManager.CardRemoved   jprvita at gmail.com
• [pulseaudio-discuss] [PATCH 1/2] bluetooth: Remove unnecessary braces   jprvita at gmail.com
  • [pulseaudio-discuss] [PATCH 2/2] bluetooth: Improve code and log readability   jprvita at gmail.com
  • [pulseaudio-discuss] [PATCH 1/2] bluetooth: Remove unnecessary braces   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] Use upstream gettext instead glib one   Javier Jardón
• [pulseaudio-discuss] [PATCH] Use upstream gettext instead glib one   Javier Jardón
  • [pulseaudio-discuss] [PATCH] Use upstream gettext instead glib one   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] Fix latency flag handling.   Juho Hämäläinen
  • [pulseaudio-discuss] [PATCH] modules: Propagate (dynamic) latency flag changes in remap-source.   Juho Hämäläinen
• [pulseaudio-discuss] [PATCH] Fix latency flag handling.   Juho Hämäläinen
  • [pulseaudio-discuss] [PATCH] modules: Propagate (dynamic) latency flag changes in remap-source.   Juho Hämäläinen
• [pulseaudio-discuss] [PATCH v2 0/5] No more dual-direction ports.   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2] device-port: Introduce port_new_data struct.   poljar (Damir Jelić)
  • [pulseaudio-discuss] [PATCH v2] device-port: Introduce port_new_data struct.   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] build: make ARM NEON check in configure.ac more strict   Peter Meerwald
  • [pulseaudio-discuss] [PATCH] remap: fix check when to apply specialized code path   Peter Meerwald
    • [pulseaudio-discuss] [PATCH] remap: fix check when to apply specialized code path   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH] build: make ARM NEON check in configure.ac more strict   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 0/3] Sink and source flag change fixes   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 1/3] sink, source: Propagate flag changes to filters   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 2/3] sink, source: Really set the fixed latency in set_fixed_latency_within_thread(), always.   Tanu Kaskinen
  • [pulseaudio-discuss] [PATCH 3/3] sink, source: Send notifications when flags change   Tanu Kaskinen
• [pulseaudio-discuss] Update hook for selectively allowing non-fast-forward updates   Tanu Kaskinen
  • [pulseaudio-discuss] Update hook for selectively allowing non-fast-forward updates   David Henningsson
    • [pulseaudio-discuss] Update hook for selectively allowing non-fast-forward updates   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] systemd-login: Remove unused variable session.   poljar (Damir Jelić)
  • [pulseaudio-discuss] [PATCH] systemd-login: Remove unused variable session.   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] core-util: Don't accept random words in pa_parse_boolean().   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 01/10] sconv: Cleanup sconv_neon.c   Peter Meerwald
  • [pulseaudio-discuss] [PATCH 02/10] cpu-test: Test svolume code on 4 channels instead of 3   Peter Meerwald
  • [pulseaudio-discuss] [PATCH 03/10] pulse: Add PA_VOLUME_HALF, PA_VOLUME_QUARTER   Peter Meerwald
  • [pulseaudio-discuss] [PATCH 04/10] remap: Add stereo to mono special case remapping   Peter Meerwald
  • [pulseaudio-discuss] [PATCH 05/10] remap: Add 4-channel special case remapping   Peter Meerwald
  • [pulseaudio-discuss] [PATCH 06/10] core: Add ARM NEON optimized remapping code   Peter Meerwald
  • [pulseaudio-discuss] [PATCH 07/10] core: Distinguish Cortex processors (A8, A9, A15)   Peter Meerwald
  • [pulseaudio-discuss] [PATCH 08/10] core: Initialize ARM NEON remapping code if available   Peter Meerwald
  • [pulseaudio-discuss] [PATCH 09/10] cpu-test: Add test cases for remap, remap_neon   Peter Meerwald
  • [pulseaudio-discuss] [PATCH 10/10] tests: Add remap-special-test   Peter Meerwald
• [pulseaudio-discuss] module-lfe-lp rewind implemented, requesting review of rewind code   Justin Chudgar
• [pulseaudio-discuss] Biquad LR4 for module-lfe-lp   Justin Chudgar
  • [pulseaudio-discuss] Biquad LR4 for module-lfe-lp   Alexander E. Patrakov
    • [pulseaudio-discuss] Biquad LR4 for module-lfe-lp   Justin Chudgar
      • [pulseaudio-discuss] Biquad LR4 for module-lfe-lp   Alexander E. Patrakov
• [pulseaudio-discuss] Digital output volume reset, if changing output. + Problems after Verbose log   Espen Lund
• [pulseaudio-discuss] Sinks: thread_info.max_rewind debug printfs   Justin Chudgar
  • [pulseaudio-discuss] Sinks: thread_info.max_rewind debug printfs   Tanu Kaskinen

Last message date: Sun Mar 31 23:33:47 PDT 2013
Archived on: Tue Apr 2 02:47:46 PDT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...